• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 18521
  • Last Modified:

How do I print a config page from a HP LaserJet P2015n network printer.

I have a HP LaserJet P2015n attached via ethernet to a network.
I would like to find its IP Address but cannot get a page printed.
There is no menuing system on this printer just a "Go" and "Cancel" button.
There is no little button beside its RJ45 socket.

Pressing the "Go" button gives me a "product" sheet but no config info.

Can anyone tell me the secret? Thanks.
0
colinasad
Asked:
colinasad
1 Solution
 
VallerianiCommented:
Yeah from what I see on the manual it states

"Print a Network Configuration page: When the printer is in the Ready state, press and hold the
Go button for 5 seconds. The Network Configuration page automatically prints with the
Configuration page."

Perhaps it is not connected properly? Are you on a router? Maybe you can access the router and check what IP the printer has assigned. Normally its a 'DHCP client table' you can find around with the network/router settings and find the IP that way?
0
 
colinasadAuthor Commented:
Thanks Valleriani,
I gseemed to get it by holding down the "Go" and "Cancel" buttons for 5 seconds, but I was sure I had tried that (and every other possible permutation and time-gap). I also swapped data ports, but the old one was working OK - I'm on it now.
Anyway, I now have my Config Page.
Regards.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now