jrjaq63
asked on
after reinstallation XP pro SP2 and SP3, unknown device ACPI\BCM0101
HI, i reinstall XP PRO SP2 with the HP cds and patch to SP3.
I download from another all the HP drivers and/or Intel 945 and i flash the BIOS to V1.59.
I still have an unknown device (ACPI\BCM0101\1).
I read others post and reinstall Broadcom drivers, realtek drives ==> no change.
The access to Internet by ethernet is very slow and sometimes hangs.
What can i do?
Thanks for your help
I download from another all the HP drivers and/or Intel 945 and i flash the BIOS to V1.59.
I still have an unknown device (ACPI\BCM0101\1).
I read others post and reinstall Broadcom drivers, realtek drives ==> no change.
The access to Internet by ethernet is very slow and sometimes hangs.
What can i do?
Thanks for your help
It is a broadcom TPM. the drivers should be on the CD.
ASKER
Hp doesn't give drivers on CD. I download Broadcom V8.27.1.0 from HP site and reinstall it.
No effect...
No effect...
have you tried a driver detector? more specificaly driver detective?
try diabling and/or removing all your network conections..
then unisntall and reinstall the driver
then unisntall and reinstall the driver
ASKER
No. I just install "System Info for Windows" that give me the same precisions than Windows.
Could you notice me a link to a driver detector?
Could you notice me a link to a driver detector?
Uninstall the sp3 restart reinstall the driver.
To find the appropriate driver chat online with hp soppurt
http://welcome.hp.com/country/us/en/contact/chat_1.html
Good luck.
To find the appropriate driver chat online with hp soppurt
http://welcome.hp.com/country/us/en/contact/chat_1.html
Good luck.
ASKER
I removing all network drivers and reinstall the HP versions (download from V10.85 to V8.27.1 for broadcom). No effects
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
i dint mean remove all network drivers i meant disable and delete the network connections
ASKER
@3986: i desinstall the SP3 and reinstall older version for Broadcom ==> still have the unknow device.
@hexemes: i manage (between several internet hangs) to download driverdetective; i have some drivers to reload (intel 82801G PCI Express Root port 27D0, intel 82801 PCI Bridge 244e, Intel 82801G SMBus Controller 27DA). i tried to do this but i have problems.
@hexemes: i manage (between several internet hangs) to download driverdetective; i have some drivers to reload (intel 82801G PCI Express Root port 27D0, intel 82801 PCI Bridge 244e, Intel 82801G SMBus Controller 27DA). i tried to do this but i have problems.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
.