leapingleon
asked on
PHP script exiting before it is finished
Hi There
I have written a script for our website that imports listings into our database. The script does quite a bit of manipulating, importing listings, as well as pulling off and converting images from other sites (we have permission for all that).
However, my script always gets to around the 150 listing mark (no the same, sometimes 130's or more than 160) or in that range. I dont think it is a time limit on the script as I have set it quite high, and I also have another script written by someone else that runs alot longer but never quits prematurely.
Is there anything else other than time that could cause this premature exit, considering the code is good (when I restart the script it carries off from where it left off and goes for another 150 or so listings). Is it handling too much data? Is ther any way around this, i.e. clearing cache or letting it sleep for a while?
Thanks
Leon
I have written a script for our website that imports listings into our database. The script does quite a bit of manipulating, importing listings, as well as pulling off and converting images from other sites (we have permission for all that).
However, my script always gets to around the 150 listing mark (no the same, sometimes 130's or more than 160) or in that range. I dont think it is a time limit on the script as I have set it quite high, and I also have another script written by someone else that runs alot longer but never quits prematurely.
Is there anything else other than time that could cause this premature exit, considering the code is good (when I restart the script it carries off from where it left off and goes for another 150 or so listings). Is it handling too much data? Is ther any way around this, i.e. clearing cache or letting it sleep for a while?
Thanks
Leon
husker475
Maybe increasing the memory limit helps? Are any error messages been shown? Do you have error_reporting on?
how do you run the script? is it as server side web script or as shell script? how to find it premature exit? is there error on your browser (assuming that you run the script as server side web script)? what is the error that you see?
ASKER
Got error reporting on: error_reporting(E_ALL ^ E_NOTICE);
however it is not giving me any errors.
It is a server side web script. no errors, it just stops.
however it is not giving me any errors.
It is a server side web script. no errors, it just stops.
can you post your code?
ASKER
script attached
Import-Advent.txt
Import-Advent.txt
ASKER
Two minutes, it seems to only run for 120 seconds and then stops.
Any idea why? Considering another script on our server runs for way longer.
Any idea why? Considering another script on our server runs for way longer.
ASKER
Sorry, ignore last post, put a sleep function in and it went for longer.
It always seems to be about the 145 - 160 listing mark.
It always seems to be about the 145 - 160 listing mark.
ASKER
Ok, think I found out where it is always stopping, but still dont know why. It always seems to get to a certain part of the script, where I drag the images from another site to our server. Can you see anything wrong with the way I am doing it? Or, could it be that the memory is too high? Or too many open connections? Or anything, I really dont know.
function import($from, $saveTo, $overwrite=FALSE)
{
if( TRUE===file_exists($saveTo) && $overwrite===FALSE)
{
return FALSE;
}
$put = fopen($saveTo, 'wb');
$get = fopen($from, 'rb');
if ($put===FALSE || $get===FALSE)
{
return FALSE;
}
while (!feof($get))
{
if (fwrite($put, fread($get, 1024)) === FALSE)
{
return FALSE;
}
}
fclose($put);
fclose($get);
return TRUE;
}
if ($image1 != "") {
import($image1,"image1.jpg");
$totalimagecount = $totalimagecount + 1;
$foo = new upload('image1.jpg');
if ($foo->uploaded && $foo->file_is_image) {
$count = $count + 1;
$filename = substr(md5(uniqid(rand(), true)), 0, 20);
$foo->file_new_name_body = $filename;
$foo->image_resize = true;
$foo->image_convert = 'gif';
if ($foo->image_src_y > '200')
{
$foo->image_y = 200;
}
$foo->image_ratio_x = true;
$foo->Process('../../../Uploads/');
if ($foo->processed) {
$imagearray[$count] = $filename . ".gif";
$foo->Clean();
} else {
echo 'error : ' . $foo->error;
}
}
}
every where you have return false,
I would place a debugging line like,
echo "1";
...
echo "2";
etc.
then see where it stops
I would place a debugging line like,
echo "1";
...
echo "2";
etc.
then see where it stops
ASKER
It exits at different points all the time, but always during the following
$foo->Process('../../../Up
$foo->Process('../../../Up
I need you to post the class
upload
upload
ASKER
Its 4 posts up.
no, that's where you are calling and referencing the class, not where you actual written the class
class upload
{
}
$foo = new upload('image1.jpg'); // << this upload class is what I want posted.
class upload
{
}
$foo = new upload('image1.jpg'); // << this upload class is what I want posted.
$foo = new upload('image1.jpg'); //Here's Where you create the upload class object
if ($foo->uploaded && $foo->file_is_image) {
$count = $count + 1;
$filename = substr(md5(uniqid(rand(), true)), 0, 20);
$foo->file_new_name_body = $filename; //here is where you are setting the variable $file_new_name_body that exits in the upload class
$foo->image_resize = true; //Here is where you set the variable $image_resize = true in the upload class
$foo->image_convert = 'gif';
if ($foo->image_src_y > '200')
{
$foo->image_y = 200;
}
$foo->image_ratio_x = true;
$foo->Process('../../../Uploads/');
if ($foo->processed) {
$imagearray[$count] = $filename . ".gif";
$foo->Clean();
} else {
echo 'error : ' . $foo->error;
}
}
ASKER
Thats what is attached, four posts up, labelled class.upload.php.txt
I will attach it as a code snippet this time then, but the full class is above.
I will attach it as a code snippet this time then, but the full class is above.
<?php
// +------------------------------------------------------------------------+
// | class.upload.php |
// +------------------------------------------------------------------------+
// | Copyright (c) Colin Verot 2003-2007. All rights reserved. |
// | Version 0.25 |
// | Last modified 17/11/2007 |
// | Email colin@verot.net |
// | Web http://www.verot.net |
// +------------------------------------------------------------------------+
// | This program is free software; you can redistribute it and/or modify |
// | it under the terms of the GNU General Public License version 2 as |
// | published by the Free Software Foundation. |
// | |
// | This program is distributed in the hope that it will be useful, |
// | but WITHOUT ANY WARRANTY; without even the implied warranty of |
// | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
// | GNU General Public License for more details. |
// | |
// | You should have received a copy of the GNU General Public License |
// | along with this program; if not, write to the |
// | Free Software Foundation, Inc., 59 Temple Place, Suite 330, |
// | Boston, MA 02111-1307 USA |
// | |
// | Please give credit on sites that use class.upload and submit changes |
// | of the script so other people can use them as well. |
// | This script is free to use, don't abuse. |
// +------------------------------------------------------------------------+
//
/**
* Class upload
*
* @version 0.25
* @author Colin Verot <colin@verot.net>
* @license http://opensource.org/licenses/gpl-license.php GNU Public License
* @copyright Colin Verot
* @package cmf
* @subpackage external
*/
/**
* Class upload
*
* <b>What does it do?</b>
*
* It manages file uploads for you. In short, it manages the uploaded file,
* and allows you to do whatever you want with the file, especially if it
* is an image, and as many times as you want.
*
* It is the ideal class to quickly integrate file upload in your site.
* If the file is an image, you can convert, resize, crop it in many ways.
* You can also apply filters, add borders, text, watermarks, etc...
* That's all you need for a gallery script for instance. Supported formats
* are PNG, JPG, GIF and BMP.
*
* You can also use the class to work on local files, which is especially
* useful to use the image manipulation features.
*
* The class works with PHP 4 and 5, and its error messages can
* be localized at will.
*
* <b>How does it work?</b>
*
* You instanciate the class with the $_FILES['my_field'] array
* where my_field is the field name from your upload form.
* The class will check if the original file has been uploaded
* to its temporary location (alternatively, you can instanciate
* the class with a local filename).
*
* You can then set a number of processing variables to act on the file.
* For instance, you can rename the file, and if it is an image,
* convert and resize it in many ways.
* You can also set what will the class do if the file already exists.
*
* Then you call the function {@link process} to actually perform the actions
* according to the processing parameters you set above.
* It will create new instances of the original file,
* so the original file remains the same between each process.
* The file will be manipulated, and copied to the given location.
* The processing variables will be reseted once it is done.
*
* You can repeat setting up a new set of processing variables,
* and calling {@link process} again as many times as you want.
* When you have finished, you can call {@link clean} to delete
* the original uploaded file.
*
* If you don't set any processing parameters and call {@link process}
* just after instanciating the class. The uploaded file will be simply
* copied to the given location without any alteration or checks.
*
* Don't forget to add <i>enctype="multipart/form-data"</i> in your form
* tag <form> if you want your form to upload the file.
*
* <b>How to use it?</b><br>
* Create a simple HTML file, with a form such as:
* <pre>
* <form enctype="multipart/form-data" method="post" action="upload.php">
* <input type="file" size="32" name="image_field" value="">
* <input type="submit" name="Submit" value="upload">
* </form>
* </pre>
* Create a file called upload.php:
* <pre>
* $handle = new upload($_FILES['image_field']);
* if ($handle->uploaded) {
* $handle->file_new_name_body = 'image_resized';
* $handle->image_resize = true;
* $handle->image_x = 100;
* $handle->image_ratio_y = true;
* $handle->process('/home/user/files/');
* if ($handle->processed) {
* echo 'image resized';
* $handle->clean();
* } else {
* echo 'error : ' . $handle->error;
* }
* }
* </pre>
*
* <b>How to process local files?</b><br>
* Use the class as following, the rest being the same as above:
* <pre>
* $handle = new upload('/home/user/myfile.jpg');
* </pre>
*
* <b>How to set the language?</b><br>
* Instantiate the class with a second argument being the language code:
* <pre>
* $handle = new upload($_FILES['image_field'], 'fr_FR');
* $handle = new upload('/home/user/myfile.jpg', 'fr_FR');
* </pre>
*
* <b>How to output the resulting file or picture directly to the browser?</b><br>
* Simply call {@link process}() without an argument (or with null as first argument):
* <pre>
* $handle = new upload($_FILES['image_field']);
* header('Content-type: ' . $handle->file_src_mime);
* echo $handle->Process();
* die();
* </pre>
* Or if you want to force the download of the file:
* <pre>
* $handle = new upload($_FILES['image_field']);
* header('Content-type: ' . $handle->file_src_mime);
* header("Content-Disposition: attachment; filename=".rawurlencode($handle->file_src_name).";");
* echo $handle->Process();
* die();
* </pre>
*
* <b>Processing parameters</b> (reseted after each process)
* <ul>
* <li><b>file_new_name_body</b> replaces the name body (default: '')<br>
* <pre>$handle->file_new_name_body = 'new name';</pre></li>
* <li><b>file_name_body_add</b> appends to the name body (default: '')<br>
* <pre>$handle->file_name_body_add = '_uploaded';</pre></li>
* <li><b>file_new_name_ext</b> replaces the file extension (default: '')<br>
* <pre>$handle->file_new_name_ext = 'txt';</pre></li>
* <li><b>file_safe_name</b> formats the filename (spaces changed to _) (default: true)<br>
* <pre>$handle->file_safe_name = true;</pre></li>
* <li><b>file_overwrite</b> sets behaviour if file already exists (default: false)<br>
* <pre>$handle->file_overwrite = true;</pre></li>
* <li><b>file_auto_rename</b> automatically renames file if it already exists (default: true)<br>
* <pre>$handle->file_auto_rename = true;</pre></li>
* <li><b>auto_create_dir</b> automatically creates destination directory if missing (default: true)<br>
* <pre>$handle->auto_create_dir = true;</pre></li>
* <li><b>dir_auto_chmod</b> automatically attempts to chmod the destination directory if not writeable (default: true)<br>
* <pre>$handle->dir_auto_chmod = true;</pre></li>
* <li><b>dir_chmod</b> chmod used when creating directory or if directory not writeable (default: 0777)<br>
* <pre>$handle->dir_chmod = 0777;</pre></li>
* <li><b>file_max_size</b> sets maximum upload size (default: upload_max_filesize from php.ini)<br>
* <pre>$handle->file_max_size = '1024'; // 1KB</pre></li>
* <li><b>mime_check</b> sets if the class check the MIME against the {@link allowed} list (default: true)<br>
* <pre>$handle->mime_check = false;</pre></li>
* <li><b>mime_magic_check</b> sets if the class uses mime_magic (default: false)<br>
* <pre>$handle->mime_magic_check = true;</pre></li>
* <li><b>no_script</b> sets if the class turns scripts into text files (default: true)<br>
* <pre>$handle->no_script = false;</pre></li>
* <li><b>allowed</b> array of allowed mime-types. wildcard accepted, as in image/* (default: check {@link Init})<br>
* <pre>$handle->allowed = array('application/pdf','application/msword', 'image/*');</pre></li>
* <li><b>forbidden</b> array of forbidden mime-types. wildcard accepted, as in image/* (default: check {@link Init})<br>
* <pre>$handle->forbidden = array('application/*');</pre></li>
* </ul>
* <ul>
* <li><b>image_convert</b> if set, image will be converted (possible values : ''|'png'|'jpeg'|'gif'|'bmp'; default: '')<br>
* <pre>$handle->image_convert = 'jpg';</pre></li>
* <li><b>image_background_color</b> if set, will forcibly fill transparent areas with the color, in hexadecimal (default: null)<br>
* <pre>$handle->image_background_color = '#FF00FF';</pre></li>
* <li><b>image_default_color</b> fallback color background color for non alpha-transparent output formats, such as JPEG or BMP, in hexadecimal (default: #FFFFFF)<br>
* <pre>$handle->image_default_color = '#FF00FF';</pre></li>
* <li><b>jpeg_quality</b> sets the compression quality for JPEG images (default: 85)<br>
* <pre>$handle->jpeg_quality = 50;</pre></li>
* <li><b>jpeg_size</b> if set to a size in bytes, will approximate {@link jpeg_quality} so the output image fits within the size (default: null)<br>
* <pre>$handle->jpeg_size = 3072;</pre></li>
* </ul>
* The following eight settings can be used to invalidate an upload if the file is an image (note that <i>open_basedir</i> restrictions prevent the use of these settings)
* <ul>
* <li><b>image_max_width</b> if set to a dimension in pixels, the upload will be invalid if the image width is greater (default: null)<br>
* <pre>$handle->image_max_width = 200;</pre></li>
* <li><b>image_max_height</b> if set to a dimension in pixels, the upload will be invalid if the image height is greater (default: null)<br>
* <pre>$handle->image_max_height = 100;</pre></li>
* <li><b>image_max_pixels</b> if set to a number of pixels, the upload will be invalid if the image number of pixels is greater (default: null)<br>
* <pre>$handle->image_max_pixels = 50000;</pre></li>
* <li><b>image_max_ratio</b> if set to a aspect ratio (width/height), the upload will be invalid if the image apect ratio is greater (default: null)<br>
* <pre>$handle->image_max_ratio = 1.5;</pre></li>
* <li><b>image_min_width</b> if set to a dimension in pixels, the upload will be invalid if the image width is lower (default: null)<br>
* <pre>$handle->image_min_width = 100;</pre></li>
* <li><b>image_min_height</b> if set to a dimension in pixels, the upload will be invalid if the image height is lower (default: null)<br>
* <pre>$handle->image_min_height = 500;</pre></li>
* <li><b>image_min_pixels</b> if set to a number of pixels, the upload will be invalid if the image number of pixels is lower (default: null)<br>
* <pre>$handle->image_min_pixels = 20000;</pre></li>
* <li><b>image_min_ratio</b> if set to a aspect ratio (width/height), the upload will be invalid if the image apect ratio is lower (default: null)<br>
* <pre>$handle->image_min_ratio = 0.5;</pre></li>
* </ul>
* <ul>
* <li><b>image_resize</b> determines is an image will be resized (default: false)<br>
* <pre>$handle->image_resize = true;</pre></li>
* </ul>
* The following variables are used only if {@link image_resize} == true
* <ul>
* <li><b>image_x</b> destination image width (default: 150)<br>
* <pre>$handle->image_x = 100;</pre></li>
* <li><b>image_y</b> destination image height (default: 150)<br>
* <pre>$handle->image_y = 200;</pre></li>
* </ul>
* Use either one of the following
* <ul>
* <li><b>image_ratio</b> if true, resize image conserving the original sizes ratio, using {@link image_x} AND {@link image_y} as max sizes if true (default: false)<br>
* <pre>$handle->image_ratio = true;</pre></li>
* <li><b>image_ratio_crop</b> if true, resize image conserving the original sizes ratio, using {@link image_x} AND {@link image_y} as max sizes, and cropping excedent to fill the space. setting can also be a string, with one or more from 'TBLR', indicating which side of the image will be kept while cropping (default: false)<br>
* <pre>$handle->image_ratio_crop = true;</pre></li>
* <li><b>image_ratio_fill</b> if true, resize image conserving the original sizes ratio, using {@link image_x} AND {@link image_y} as max sizes, fitting the image in the space and coloring the remaining space. setting can also be a string, with one or more from 'TBLR', indicating which side of the space the image will be in (default: false)<br>
* <pre>$handle->image_ratio_fill = true;</pre></li>
* <li><b>image_ratio_no_zoom_in</b> same as {@link image_ratio}, but won't resize if the source image is smaller than {@link image_x} x {@link image_y} (default: false)<br>
* <pre>$handle->image_ratio_no_zoom_in = true;</pre></li>
* <li><b>image_ratio_no_zoom_out</b> same as {@link image_ratio}, but won't resize if the source image is bigger than {@link image_x} x {@link image_y} (default: false)<br>
* <pre>$handle->image_ratio_no_zoom_out = true;</pre></li>
* <li><b>image_ratio_x</b> if true, resize image, calculating {@link image_x} from {@link image_y} and conserving the original sizes ratio (default: false)<br>
* <pre>$handle->image_ratio_x = true;</pre></li>
* <li><b>image_ratio_y</b> if true, resize image, calculating {@link image_y} from {@link image_x} and conserving the original sizes ratio (default: false)<br>
* <pre>$handle->image_ratio_y = true;</pre></li>
* <li><b>image_ratio_pixels</b> if set to a long integer, resize image, calculating {@link image_y} and {@link image_x} to match a the number of pixels (default: false)<br>
* <pre>$handle->image_ratio_pixels = 25000;</pre></li>
* </ul>
* The following image manipulations require GD2+
* <ul>
* <li><b>image_brightness</b> if set, corrects the brightness. value between -127 and 127 (default: null)<br>
* <pre>$handle->image_brightness = 40;</pre></li>
* <li><b>image_contrast</b> if set, corrects the contrast. value between -127 and 127 (default: null)<br>
* <pre>$handle->image_contrast = 50;</pre></li>
* <li><b>image_tint_color</b> if set, will tint the image with a color, value as hexadecimal #FFFFFF (default: null)<br>
* <pre>$handle->image_tint_color = '#FF0000';</pre></li>
* <li><b>image_overlay_color</b> if set, will add a colored overlay, value as hexadecimal #FFFFFF (default: null)<br>
* <pre>$handle->image_overlay_color = '#FF0000';</pre></li>
* <li><b>image_overlay_percent</b> used when {@link image_overlay_color} is set, determines the opacity (default: 50)<br>
* <pre>$handle->image_overlay_percent = 20;</pre></li>
* <li><b>image_negative</b> inverts the colors in the image (default: false)<br>
* <pre>$handle->image_negative = true;</pre></li>
* <li><b>image_greyscale</b> transforms an image into greyscale (default: false)<br>
* <pre>$handle->image_greyscale = true;</pre></li>
* <li><b>image_threshold</b> applies a threshold filter. value between -127 and 127 (default: null)<br>
* <pre>$handle->image_threshold = 20;</pre></li>
* </ul>
* <ul>
* <li><b>image_text</b> creates a text label on the image, value is a string, with eventual replacement tokens (default: null)<br>
* <pre>$handle->image_text = 'test';</pre></li>
* <li><b>image_text_direction</b> text label direction, either 'h' horizontal or 'v' vertical (default: 'h')<br>
* <pre>$handle->image_text_direction = 'v';</pre></li>
* <li><b>image_text_color</b> text color for the text label, in hexadecimal (default: #FFFFFF)<br>
* <pre>$handle->image_text_color = '#FF0000';</pre></li>
* <li><b>image_text_percent</b> text opacity on the text label, integer between 0 and 100 (default: 100)<br>
* <pre>$handle->image_text_percent = 50;</pre></li>
* <li><b>image_text_background</b> text label background color, in hexadecimal (default: null)<br>
* <pre>$handle->image_text_background = '#FFFFFF';</pre></li>
* <li><b>image_text_background_percent</b> text label background opacity, integer between 0 and 100 (default: 100)<br>
* <pre>$handle->image_text_background_percent = 50;</pre></li>
* <li><b>image_text_font</b> built-in font for the text label, from 1 to 5. 1 is the smallest (default: 5)<br>
* <pre>$handle->image_text_font = 4;</pre></li>
* <li><b>image_text_x</b> absolute text label position, in pixels from the left border. can be negative (default: null)<br>
* <pre>$handle->image_text_x = 5;</pre></li>
* <li><b>image_text_y</b> absolute text label position, in pixels from the top border. can be negative (default: null)<br>
* <pre>$handle->image_text_y = 5;</pre></li>
* <li><b>image_text_position</b> text label position withing the image, a combination of one or two from 'TBLR': top, bottom, left, right (default: null)<br>
* <pre>$handle->image_text_position = 'LR';</pre></li>
* <li><b>image_text_padding</b> text label padding, in pixels. can be overridden by {@link image_text_padding_x} and {@link image_text_padding_y} (default: 0)<br>
* <pre>$handle->image_text_padding = 5;</pre></li>
* <li><b>image_text_padding_x</b> text label horizontal padding (default: null)<br>
* <pre>$handle->image_text_padding_x = 2;</pre></li>
* <li><b>image_text_padding_y</b> text label vertical padding (default: null)<br>
* <pre>$handle->image_text_padding_y = 10;</pre></li>
* <li><b>image_text_alignment</b> text alignment when text has multiple lines, either 'L', 'C' or 'R' (default: 'C')<br>
* <pre>$handle->image_text_alignment = 'R';</pre></li>
* <li><b>image_text_line_spacing</b> space between lines in pixels, when text has multiple lines (default: 0)<br>
* <pre>$handle->image_text_line_spacing = 3;</pre></li>
* </ul>
* <ul>
* <li><b>image_flip</b> flips image, wither 'h' horizontal or 'v' vertical (default: null)<br>
* <pre>$handle->image_flip = 'h';</pre></li>
* <li><b>image_rotate</b> rotates image. possible values are 90, 180 and 270 (default: null)<br>
* <pre>$handle->image_rotate = 90;</pre></li>
* <li><b>image_crop</b> crops image. accepts 4, 2 or 1 values as 'T R B L' or 'TB LR' or 'TBLR'. dimension can be 20, or 20px or 20% (default: null)<br>
* <pre>$handle->image_crop = array(50,40,30,20); OR '-20 20%'...</pre></li>
* </ul>
* <ul>
* <li><b>image_bevel</b> adds a bevel border to the image. value is thickness in pixels (default: null)<br>
* <pre>$handle->image_bevel = 20;</pre></li>
* <li><b>image_bevel_color1</b> top and left bevel color, in hexadecimal (default: #FFFFFF)<br>
* <pre>$handle->image_bevel_color1 = '#FFFFFF';</pre></li>
* <li><b>image_bevel_color2</b> bottom and right bevel color, in hexadecimal (default: #000000)<br>
* <pre>$handle->image_bevel_color2 = '#000000';</pre></li>
* <li><b>image_border</b> adds a unicolor border to the image. accepts 4, 2 or 1 values as 'T R B L' or 'TB LR' or 'TBLR'. dimension can be 20, or 20px or 20% (default: null)<br>
* <pre>$handle->image_border = '3px'; OR '-20 20%' OR array(3,2)...</pre></li>
* <li><b>image_border_color</b> border color, in hexadecimal (default: #FFFFFF)<br>
* <pre>$handle->image_border_color = '#FFFFFF';</pre></li>
* <li><b>image_frame</b> type of frame: 1=flat 2=crossed (default: null)<br>
* <pre>$handle->image_frame = 2;</pre></li>
* <li><b>image_frame_colors</b> list of hex colors, in an array or a space separated string (default: '#FFFFFF #999999 #666666 #000000')<br>
* <pre>$handle->image_frame_colors = array('#999999', '#FF0000', '#666666', '#333333', '#000000');</pre></li>
* </ul>
* <ul>
* <li><b>image_watermark</b> adds a watermark on the image, value is a local filename. accepted files are GIF, JPG, BMP, PNG and PNG alpha (default: null)<br>
* <pre>$handle->image_watermark = 'watermark.png';</pre></li>
* <li><b>image_watermark_x</b> absolute watermark position, in pixels from the left border. can be negative (default: null)<br>
* <pre>$handle->image_watermark_x = 5;</pre></li>
* <li><b>image_watermark_y</b> absolute watermark position, in pixels from the top border. can be negative (default: null)<br>
* <pre>$handle->image_watermark_y = 5;</pre></li>
* <li><b>image_watermark_position</b> watermark position withing the image, a combination of one or two from 'TBLR': top, bottom, left, right (default: null)<br>
* <pre>$handle->image_watermark_position = 'LR';</pre></li>
* </ul>
* <ul>
* <li><b>image_reflection_height</b> if set, a reflection will be added. Format is either in pixels or percentage, such as 40, '40', '40px' or '40%' (default: null)<br>
* <pre>$handle->image_reflection_height = '25%';</pre></li>
* <li><b>image_reflection_space</b> space in pixels between the source image and the reflection, can be negative (default: null)<br>
* <pre>$handle->image_reflection_space = 3;</pre></li>
* <li><b>image_reflection_color</b> reflection background color, in hexadecimal. Now deprecated in favor of {@link image_default_color} (default: #FFFFFF)<br>
* <pre>$handle->image_default_color = '#000000';</pre></li>
* <li><b>image_reflection_opacity</b> opacity level at which the reflection starts, integer between 0 and 100 (default: 60)<br>
* <pre>$handle->image_reflection_opacity = 60;</pre></li>
* </ul>
*
* <b>Values that can be read before calling {@link process}()</b>
* <ul>
* <li><b>file_src_name</b> Source file name</li>
* <li><b>file_src_name_body</b> Source file name body</li>
* <li><b>file_src_name_ext</b> Source file extension</li>
* <li><b>file_src_pathname</b> Source file complete path and name</li>
* <li><b>file_src_mime</b> Source file mime type</li>
* <li><b>file_src_size</b> Source file size in bytes</li>
* <li><b>file_src_error</b> Upload error code</li>
* <li><b>file_is_image</b> Boolean flag, true if the file is a supported image type</li>
* </ul>
* If the file is a supported image type (and <i>open_basedir</i> restrictions allow it)
* <ul>
* <li><b>image_src_x</b> Source file width in pixels</li>
* <li><b>image_src_y</b> Source file height in pixels</li>
* <li><b>image_src_pixels</b> Source file number of pixels</li>
* <li><b>image_src_type</b> Source file type (png, jpg, gif or bmp)</li>
* <li><b>image_src_bits</b> Source file color depth</li>
* </ul>
*
* <b>Values that can be read before after {@link process}()</b>
* <ul>
* <li><b>file_dst_path</b> Destination file path</li>
* <li><b>file_dst_name_body</b> Destination file name body</li>
* <li><b>file_dst_name_ext</b> Destination file extension</li>
* <li><b>file_dst_name</b> Destination file name</li>
* <li><b>file_dst_pathname</b> Destination file complete path and name</li>
* </ul>
* If the file is a supported image type
* <ul>
* <li><b>image_dst_x</b> Destination file width</li>
* <li><b>image_dst_y</b> Destination file height</li>
* <li><b>image_convert</b> Destination file format</li>
* </ul>
*
* <b>Requirements</b>
*
* Most of the image operations require GD. GD2 is greatly recommended
*
* The class is compatible with PHP 4.3+, and compatible with PHP5
*
* <b>Changelog</b>
* <ul>
* <li><b>v 0.25</b> 17/11/2007<br>
* - added translation files and mechanism to instantiate the class with a language different from English<br>
* - added {@link forbidden} to set an array of forbidden MIME types<br>
* - implemented support for simple wildcards in {@link allowed} and {@link forbidden}, such as image/*<br>
* - preset the file extension to the desired conversion format when converting an image<br>
* - added read and write support for BMP images<br>
* - added a flag {@link file_is_image} to determine if the file is a supported image type<br>
* - the class now provides some information about the image, before calling {@link process}(). Available are {@link image_src_x}, {@link image_src_y} and the newly introduced {@link image_src_bits}, {@link image_src_pixels} and {@link image_src_type}. Note that this will not work if <i>open_basedir</i> restrictions are in place<br>
* - improved logging; now provides useful system information<br>
* - added some more pre-processing checks for files that are images: {@link image_max_width}, {@link image_max_height}, {@link image_max_pixels}, {@link image_max_ratio}, {@link image_min_width}, {@link image_min_height}, {@link image_min_pixels} and {@link image_min_ratio}<br>
* - added {@link image_ratio_pixels} to resize an image to a number of pixels, keeping aspect ratio<br>
* - added {@link image_is_palette} and {@link image_is_transparent} and {@link image_transparent_color} for GIF images<br>
* - added {@link image_default_color} to define a fallback color for non alpha-transparent output formats, such as JPEG or BMP<br>
* - changed {@link image_background_color}, which now forces transparent areas to be painted<br>
* - improved reflections and color overlays so that it works with alpha transparent images<br>
* - {@link image_reflection_color} is now deprecated in favour of {@link image_default_color}<br />
* - transparent PNGs are now processed in true color, and fully preserving the alpha channel when doing merges<br>
* - transparent GIFs are now automatically detected. {@link preserve_transparency} is deprecated<br>
* - transparent true color images can be saved as GIF while retaining transparency, semi transparent areas being merged with {@link image_default_color}<br>
* - transparent true color images can be saved as JPG/BMP with the semi transparent areas being merged with {@link image_default_color}<br>
* - fixed conversion of images to true color<br>
* - the class can now output the uploaded files content as the return value of process() if the function is called with an empty or null argumenti, or no argument</li>
* <li><b>v 0.24</b> 25/05/2007<br>
* - added {@link image_background_color}, to set the default background color of an image<br>
* - added possibility of using replacement tokens in text labels<br>
* - changed default JPEG quality to 85<br>
* - fixed a small bug when using greyscale filter and associated filters<br>
* - added {@link image_ratio_fill} in order to fit an image within some dimensions and color the remaining space. Very similar to {@link image_ratio_crop}<br>
* - improved the recursive creation of directories<br>
* - the class now converts palette based images to true colors before doing graphic manipulations</li>
* <li><b>v 0.23</b> 23/12/2006<br>
* - fixed a bug when processing more than once the same uploaded file. If there is an open_basedir restriction, the class now creates a temporary file for the first call to process(). This file will be used for subsequent processes, and will be deleted upon calling clean()</li>
* <li><b>v 0.22</b> 16/12/2006<br>
* - added automatic creation of a temporary file if the upload directory is not within open_basedir<br>
* - fixed a bug which was preventing to work on a local file by overwriting it with its processed copy<br>
* - added MIME types video/x-ms-wmv and image/x-png and fixed PNG support for IE weird MIME types<br>
* - modified {@link image_ratio_crop} so it can accept one or more from string 'TBLR', determining which side of the image is kept while cropping<br>
* - added support for multiple lines in the text, using "\n" as a line break<br>
* - added {@link image_text_line_spacing} which allow to set the space between several lines of text<br>
* - added {@link image_text_alignment} which allow to set the alignment when text has several lines<br>
* - {@link image_text_font} can now be set to the path of a GDF font to load external fonts<br>
* - added {@link image_reflection_height} to create a reflection of the source image, which height is in pixels or percentage<br>
* - added {@link image_reflection_space} to set the space in pixels between the source image and the reflection<br>
* - added {@link image_reflection_color} to set the reflection background color<br>
* - added {@link image_reflection_opacity} to set the initial level of opacity of the reflection</li>
* <li><b>v 0.21</b> 30/09/2006<br>
* - added {@link image_ratio_crop} which resizes within {@link image_x} and {@link image_y}, keeping ratio, but filling the space by cropping excedent of image<br>
* - added {@link mime_check}, which default is true, to set checks against {@link allowed} MIME list<br>
* - if MIME is empty, the class now triggers an error<br>
* - color #000000 is OK for {@link image_text_color}, and related text transparency bug fixed<br>
* - {@link gd_version}() now uses gd_info(), or else phpinfo()<br>
* - fixed path issue when the destination path has no trailing slash on Windows systems <br>
* - removed inline functions to be fully PHP5 compatible </li>
* <li><b>v 0.20</b> 11/08/2006<br>
* - added some more error checking and messages (GD presence, permissions...)<br>
* - fix when uploading files without extension<br>
* - changed values for {@link image_brightness} and {@link image_contrast} to be between -127 and 127<br>
* - added {@link dir_auto_create} to automatically and recursively create destination directory if missing.<br>
* - added {@link dir_auto_chmod} to automatically chmod the destination directory if not writeable.<br>
* - added {@link dir_chmod} to set the default chmod to use.<br>
* - added {@link image_crop} to crop images<br>
* - added {@link image_negative} to invert the colors on the image<br>
* - added {@link image_greyscale} to turn the image into greyscale<br>
* - added {@link image_threshold} to apply a threshold filter on the image<br>
* - added {@link image_bevel}, {@link image_bevel_color1} and {@link image_bevel_color2} to add a bevel border<br>
* - added {@link image_border} and {@link image_border_color} to add a single color border<br>
* - added {@link image_frame} and {@link image_frame_colors} to add a multicolored frame</li>
* <li><b>v 0.19</b> 29/03/2006<br>
* - class is now compatible i18n (thanks Sylwester).<br>
* - the class can mow manipulate local files, not only uploaded files (instanciate the class with a local filename).<br>
* - {@link file_safe_name} has been improved a bit.<br>
* - added {@link image_brightness}, {@link image_contrast}, {@link image_tint_color}, {@link image_overlay_color} and {@link image_overlay_percent} to do color manipulation on the images.<br>
* - added {@link image_text} and all derivated settings to add a text label on the image.<br>
* - added {@link image_watermark} and all derivated settings to add a watermark image on the image.<br>
* - added {@link image_flip} and {@link image_rotate} for more image manipulations<br>
* - added {@link jpeg_size} to calculate the JPG compression quality in order to fit within one filesize.</li>
* <li><b>v 0.18</b> 02/02/2006<br>
* - added {@link no_script} to turn dangerous scripts into text files.<br>
* - added {@link mime_magic_check} to set the class to use mime_magic.<br>
* - added {@link preserve_transparency} *experimental*. Thanks Gregor.<br>
* - fixed size and mime checking, wasn't working :/ Thanks Willem.<br>
* - fixed memory leak when resizing images.<br>
* - when resizing, it is not necessary anymore to set {@link image_convert}.<br>
* - il is now possible to simply convert an image, with no resizing.<br>
* - sets the default {@link file_max_size} to upload_max_filesize from php.ini. Thanks Edward</li>
* <li><b>v 0.17</b> 28/05/2005<br>
* - the class can be used with any version of GD.<br>
* - added security check on the file with a list of mime-types.<br>
* - changed the license to GPL v2 only</li>
* <li><b>v 0.16</b> 19/05/2005<br>
* - added {@link file_auto_rename} automatic file renaming if the same filename already exists.<br>
* - added {@link file_safe_name} safe formatting of the filename (spaces to _underscores so far).<br>
* - added some more error reporting to avoid crash if GD is not present</li>
* <li><b>v 0.15</b> 16/04/2005<br>
* - added JPEG compression quality setting. Thanks Vad</li>
* <li><b>v 0.14</b> 14/03/2005<br>
* - reworked the class file to allow parsing with phpDocumentor</li>
* <li><b>v 0.13</b> 07/03/2005<br>
* - fixed a bug with {@link image_ratio}. Thanks Justin.<br>
* - added {@link image_ratio_no_zoom_in} and {@link image_ratio_no_zoom_out}</li>
* <li><b>v 0.12</b> 21/01/2005<br>
* - added {@link image_ratio} to resize within max values, keeping image ratio</li>
* <li><b>v 0.11</b> 22/08/2003<br>
* - update for GD2 (changed imageresized() into imagecopyresampled() and imagecreate() into imagecreatetruecolor())</li>
* </ul>
*
* @package cmf
* @subpackage external
*/
class upload {
/**
* Uploaded file name
*
* @access public
* @var string
*/
var $file_src_name;
/**
* Uploaded file name body (i.e. without extension)
*
* @access public
* @var string
*/
var $file_src_name_body;
/**
* Uploaded file name extension
*
* @access public
* @var string
*/
var $file_src_name_ext;
/**
* Uploaded file MIME type
*
* @access public
* @var string
*/
var $file_src_mime;
/**
* Uploaded file size, in bytes
*
* @access public
* @var double
*/
var $file_src_size;
/**
* Holds eventual PHP error code from $_FILES
*
* @access public
* @var string
*/
var $file_src_error;
/**
* Uloaded file name, including server path
*
* @access private
* @var string
*/
var $file_src_pathname;
/**
* Uloaded file name temporary copy
*
* @access private
* @var string
*/
var $file_src_temp;
/**
* Destination file name
*
* @access private
* @var string
*/
var $file_dst_path;
/**
* Destination file name
*
* @access public
* @var string
*/
var $file_dst_name;
/**
* Destination file name body (i.e. without extension)
*
* @access public
* @var string
*/
var $file_dst_name_body;
/**
* Destination file extension
*
* @access public
* @var string
*/
var $file_dst_name_ext;
/**
* Destination file name, including path
*
* @access private
* @var string
*/
var $file_dst_pathname;
/**
* Source image width
*
* @access private
* @var integer
*/
var $image_src_x;
/**
* Source image height
*
* @access private
* @var integer
*/
var $image_src_y;
/**
* Source image color depth
*
* @access private
* @var integer
*/
var $image_src_bits;
/**
* Number of pixels
*
* @access private
* @var long
*/
var $image_src_pixels;
/**
* Type of image (png, gif, jpg or bmp)
*
* @access private
* @var string
*/
var $image_src_type;
/**
* Destination image width
*
* @access private
* @var integer
*/
var $image_dst_x;
/**
* Destination image height
*
* @access private
* @var integer
*/
var $image_dst_y;
/**
* Supported image formats
*
* @access private
* @var array
*/
var $image_supported;
/**
* Flag to determine if the source file is an image
*
* @access private
* @var boolean
*/
var $file_is_image;
/**
* Flag set after instanciating the class
*
* Indicates if the file has been uploaded properly
*
* @access public
* @var bool
*/
var $uploaded;
/**
* Flag stopping PHP upload checks
*
* Indicates whether we instanciated the class with a filename, in which case
* we will not check on the validity of the PHP *upload*
*
* This flag is automatically set to true when working on a local file
*
* Warning: for uploads, this flag MUST be set to false for security reason
*
* @access public
* @var bool
*/
var $no_upload_check;
/**
* Flag set after calling a process
*
* Indicates if the processing, and copy of the resulting file went OK
*
* @access public
* @var bool
*/
var $processed;
/**
* Holds eventual error message in plain english
*
* @access public
* @var string
*/
var $error;
/**
* Holds an HTML formatted log
*
* @access public
* @var string
*/
var $log;
// overiddable processing variables
/**
* Set this variable to replace the name body (i.e. without extension)
*
* @access public
* @var string
*/
var $file_new_name_body;
/**
* Set this variable to add a string to the faile name body
*
* @access public
* @var string
*/
var $file_name_body_add;
/**
* Set this variable to change the file extension
*
* @access public
* @var string
*/
var $file_new_name_ext;
/**
* Set this variable to format the filename (spaces changed to _)
*
* @access public
* @var boolean
*/
var $file_safe_name;
/**
* Set this variable to false if you don't want to check the MIME against the allowed list
*
* This variable is set to true by default for security reason
*
* @access public
* @var boolean
*/
var $mime_check;
/**
* Set this variable to true if you want to check the MIME type against a mime_magic file
*
* This variable is set to false by default as many systems don't have mime_magic installed or properly set
*
* @access public
* @var boolean
*/
var $mime_magic_check;
/**
* Set this variable to false if you don't want to turn dangerous scripts into simple text files
*
* @access public
* @var boolean
*/
var $no_script;
/**
* Set this variable to true to allow automatic renaming of the file
* if the file already exists
*
* Default value is true
*
* For instance, on uploading foo.ext,<br>
* if foo.ext already exists, upload will be renamed foo_1.ext<br>
* and if foo_1.ext already exists, upload will be renamed foo_2.ext<br>
*
* @access public
* @var bool
*/
var $file_auto_rename;
/**
* Set this variable to true to allow automatic creation of the destination
* directory if it is missing (works recursively)
*
* Default value is true
*
* @access public
* @var bool
*/
var $dir_auto_create;
/**
* Set this variable to true to allow automatic chmod of the destination
* directory if it is not writeable
*
* Default value is true
*
* @access public
* @var bool
*/
var $dir_auto_chmod;
/**
* Set this variable to the default chmod you want the class to use
* when creating directories, or attempting to write in a directory
*
* Default value is 0777 (without quotes)
*
* @access public
* @var bool
*/
var $dir_chmod;
/**
* Set this variable tu true to allow overwriting of an existing file
*
* Default value is false, so no files will be overwritten
*
* @access public
* @var bool
*/
var $file_overwrite;
/**
* Set this variable to change the maximum size in bytes for an uploaded file
*
* Default value is the value <i>upload_max_filesize</i> from php.ini
*
* @access public
* @var double
*/
var $file_max_size;
/**
* Set this variable to true to resize the file if it is an image
*
* You will probably want to set {@link image_x} and {@link image_y}, and maybe one of the ratio variables
*
* Default value is false (no resizing)
*
* @access public
* @var bool
*/
var $image_resize;
/**
* Set this variable to convert the file if it is an image
*
* Possibles values are : ''; 'png'; 'jpeg'; 'gif'; 'bmp'
*
* Default value is '' (no conversion)<br>
* If {@link resize} is true, {@link convert} will be set to the source file extension
*
* @access public
* @var string
*/
var $image_convert;
/**
* Set this variable to the wanted (or maximum/minimum) width for the processed image, in pixels
*
* Default value is 150
*
* @access public
* @var integer
*/
var $image_x;
/**
* Set this variable to the wanted (or maximum/minimum) height for the processed image, in pixels
*
* Default value is 150
*
* @access public
* @var integer
*/
var $image_y;
/**
* Set this variable to keep the original size ratio to fit within {@link image_x} x {@link image_y}
*
* Default value is false
*
* @access public
* @var bool
*/
var $image_ratio;
/**
* Set this variable to keep the original size ratio to fit within {@link image_x} x {@link image_y}
*
* The image will be resized as to fill the whole space, and excedent will be cropped
*
* Value can also be a string, one or more character from 'TBLR' (top, bottom, left and right)
* If set as a string, it determines which side of the image is kept while cropping.
* By default, the part of the image kept is in the center, i.e. it crops equally on both sides
*
* Default value is false
*
* @access public
* @var mixed
*/
var $image_ratio_crop;
/**
* Set this variable to keep the original size ratio to fit within {@link image_x} x {@link image_y}
*
* The image will be resized to fit entirely in the space, and the rest will be colored.
* The default color is white, but can be set with {@link image_default_color}
*
* Value can also be a string, one or more character from 'TBLR' (top, bottom, left and right)
* If set as a string, it determines in which side of the space the image is displayed.
* By default, the image is displayed in the center, i.e. it fills the remaining space equally on both sides
*
* Default value is false
*
* @access public
* @var mixed
*/
var $image_ratio_fill;
/**
* Set this variable to a number of pixels so that {@link image_x} and {@link image_y} are the best match possible
*
* The image will be resized to have approximatively the number of pixels
* The aspect ratio wil be conserved
*
* Default value is false
*
* @access public
* @var mixed
*/
var $image_ratio_pixels;
/**
* Set this variable to keep the original size ratio to fit within {@link image_x} x {@link image_y},
* but only if original image is bigger
*
* Default value is false
*
* @access public
* @var bool
*/
var $image_ratio_no_zoom_in;
/**
* Set this variable to keep the original size ratio to fit within {@link image_x} x {@link image_y},
* but only if original image is smaller
*
* Default value is false
*
* @access public
* @var bool
*/
var $image_ratio_no_zoom_out;
/**
* Set this variable to calculate {@link image_x} automatically , using {@link image_y} and conserving ratio
*
* Default value is false
*
* @access public
* @var bool
*/
var $image_ratio_x;
/**
* Set this variable to calculate {@link image_y} automatically , using {@link image_x} and conserving ratio
*
* Default value is false
*
* @access public
* @var bool
*/
var $image_ratio_y;
/**
* Set this variable to set a maximum image width, above which the upload will be invalid
*
* Default value is null
*
* @access public
* @var integer
*/
var $image_max_width;
/**
* Set this variable to set a maximum image height, above which the upload will be invalid
*
* Default value is null
*
* @access public
* @var integer
*/
var $image_max_height;
/**
* Set this variable to set a maximum number of pixels for an image, above which the upload will be invalid
*
* Default value is null
*
* @access public
* @var long
*/
var $image_max_pixels;
/**
* Set this variable to set a maximum image aspect ratio, above which the upload will be invalid
*
* Note that ratio = width / height
*
* Default value is null
*
* @access public
* @var float
*/
var $image_max_ratio;
/**
* Set this variable to set a minimum image width, below which the upload will be invalid
*
* Default value is null
*
* @access public
* @var integer
*/
var $image_min_width;
/**
* Set this variable to set a minimum image height, below which the upload will be invalid
*
* Default value is null
*
* @access public
* @var integer
*/
var $image_min_height;
/**
* Set this variable to set a minimum number of pixels for an image, below which the upload will be invalid
*
* Default value is null
*
* @access public
* @var long
*/
var $image_min_pixels;
/**
* Set this variable to set a minimum image aspect ratio, below which the upload will be invalid
*
* Note that ratio = width / height
*
* Default value is null
*
* @access public
* @var float
*/
var $image_min_ratio;
/**
* Quality of JPEG created/converted destination image
*
* Default value is 85
*
* @access public
* @var integer
*/
var $jpeg_quality;
/**
* Determines the quality of the JPG image to fit a desired file size
*
* Value is in bytes. The JPG quality will be set between 1 and 100%
* The calculations are approximations.
*
* Default value is null (no calculations)
*
* @access public
* @var integer
*/
var $jpeg_size;
/**
* Preserve transparency when resizing or converting an image (deprecated)
*
* Default value is automatically set to true for transparent GIFs
* This setting is now deprecated
*
* @access public
* @var integer
*/
var $preserve_transparency;
/**
* Flag set to true when the image is transparent
*
* This is actually used only for transparent GIFs
*
* @access public
* @var boolean
*/
var $image_is_transparent;
/**
* Transparent color in a palette
*
* This is actually used only for transparent GIFs
*
* @access public
* @var boolean
*/
var $image_transparent_color;
/**
* Background color, used to paint transparent areas with
*
* If set, it will forcibly remove transparency by painting transparent areas with the color
* This setting will fill in all transparent areas in PNG and GIF, as opposed to {@link image_default_color}
* which will do so only in BMP, JPEG, and alpha transparent areas in transparent GIFs
* This setting overrides {@link image_default_color}
*
* Default value is null
*
* @access public
* @var string
*/
var $image_background_color;
/**
* Default color for non alpha-transparent images
*
* This setting is to be used to define a background color for semi transparent areas
* of an alpha transparent when the output format doesn't support alpha transparency
* This is useful when, from an alpha transparent PNG image, or an image with alpha transparent features
* if you want to output it as a transparent GIFs for instance, you can set a blending color for transparent areas
* If you output in JPEG or BMP, this color will be used to fill in the previously transparent areas
*
* The default color white
*
* @access public
* @var boolean
*/
var $image_default_color;
/**
* Flag set to true when the image is not true color
*
* @access public
* @var boolean
*/
var $image_is_palette;
/**
* Corrects the image brightness
*
* Value can range between -127 and 127
*
* Default value is null
*
* @access public
* @var integer
*/
var $image_brightness;
/**
* Corrects the image contrast
*
* Value can range between -127 and 127
*
* Default value is null
*
* @access public
* @var integer
*/
var $image_contrast;
/**
* Applies threshold filter
*
* Value can range between -127 and 127
*
* Default value is null
*
* @access public
* @var integer
*/
var $image_threshold;
/**
* Applies a tint on the image
*
* Value is an hexadecimal color, such as #FFFFFF
*
* Default value is null
*
* @access public
* @var string;
*/
var $image_tint_color;
/**
* Applies a colored overlay on the image
*
* Value is an hexadecimal color, such as #FFFFFF
*
* To use with {@link image_overlay_percent}
*
* Default value is null
*
* @access public
* @var string;
*/
var $image_overlay_color;
/**
* Sets the percentage for the colored overlay
*
* Value is a percentage, as an integer between 0 and 100
*
* Unless used with {@link image_overlay_color}, this setting has no effect
*
* Default value is 50
*
* @access public
* @var integer
*/
var $image_overlay_percent;
/**
* Inverts the color of an image
*
* Default value is FALSE
*
* @access public
* @var boolean;
*/
var $image_negative;
/**
* Turns the image into greyscale
*
* Default value is FALSE
*
* @access public
* @var boolean;
*/
var $image_greyscale;
/**
* Adds a text label on the image
*
* Value is a string, any text. Text will not word-wrap, although you can use breaklines in your text "\n"
*
* If set, this setting allow the use of all other settings starting with image_text_
*
* Replacement tokens can be used in the string:
* <pre>
* gd_version src_name src_name_body src_name_ext
* src_pathname src_mime src_x src_y
* src_type src_bits src_pixels
* src_size src_size_kb src_size_mb src_size_human
* dst_path dst_name_body dst_pathname
* dst_name dst_name_ext dst_x dst_y
* date time host server ip
* </pre>
* The tokens must be enclosed in square brackets: [dst_x] will be replaced by the width of the picture
*
* Default value is null
*
* @access public
* @var string;
*/
var $image_text;
/**
* Sets the text direction for the text label
*
* Value is either 'h' or 'v', as in horizontal and vertical
*
* Default value is h (horizontal)
*
* @access public
* @var string;
*/
var $image_text_direction;
/**
* Sets the text color for the text label
*
* Value is an hexadecimal color, such as #FFFFFF
*
* Default value is #FFFFFF (white)
*
* @access public
* @var string;
*/
var $image_text_color;
/**
* Sets the text visibility in the text label
*
* Value is a percentage, as an integer between 0 and 100
*
* Default value is 100
*
* @access public
* @var integer
*/
var $image_text_percent;
/**
* Sets the text background color for the text label
*
* Value is an hexadecimal color, such as #FFFFFF
*
* Default value is null (no background)
*
* @access public
* @var string;
*/
var $image_text_background;
/**
* Sets the text background visibility in the text label
*
* Value is a percentage, as an integer between 0 and 100
*
* Default value is 100
*
* @access public
* @var integer
*/
var $image_text_background_percent;
/**
* Sets the text font in the text label
*
* Value is a an integer between 1 and 5 for GD built-in fonts. 1 is the smallest font, 5 the biggest
* Value can also be a string, which represents the path to a GDF font. The font will be loaded into GD, and used as a built-in font.
*
* Default value is 5
*
* @access public
* @var mixed;
*/
var $image_text_font;
/**
* Sets the text label position within the image
*
* Value is one or two out of 'TBLR' (top, bottom, left, right)
*
* The positions are as following:
* <pre>
* TL T TR
* L R
* BL B BR
* </pre>
*
* Default value is null (centered, horizontal and vertical)
*
* Note that is {@link image_text_x} and {@link image_text_y} are used, this setting has no effect
*
* @access public
* @var string;
*/
var $image_text_position;
/**
* Sets the text label absolute X position within the image
*
* Value is in pixels, representing the distance between the left of the image and the label
* If a negative value is used, it will represent the distance between the right of the image and the label
*
* Default value is null (so {@link image_text_position} is used)
*
* @access public
* @var integer
*/
var $image_text_x;
/**
* Sets the text label absolute Y position within the image
*
* Value is in pixels, representing the distance between the top of the image and the label
* If a negative value is used, it will represent the distance between the bottom of the image and the label
*
* Default value is null (so {@link image_text_position} is used)
*
* @access public
* @var integer
*/
var $image_text_y;
/**
* Sets the text label padding
*
* Value is in pixels, representing the distance between the text and the label background border
*
* Default value is 0
*
* This setting can be overriden by {@link image_text_padding_x} and {@link image_text_padding_y}
*
* @access public
* @var integer
*/
var $image_text_padding;
/**
* Sets the text label horizontal padding
*
* Value is in pixels, representing the distance between the text and the left and right label background borders
*
* Default value is null
*
* If set, this setting overrides the horizontal part of {@link image_text_padding}
*
* @access public
* @var integer
*/
var $image_text_padding_x;
/**
* Sets the text label vertical padding
*
* Value is in pixels, representing the distance between the text and the top and bottom label background borders
*
* Default value is null
*
* If set, his setting overrides the vertical part of {@link image_text_padding}
*
* @access public
* @var integer
*/
var $image_text_padding_y;
/**
* Sets the text alignment
*
* Value is a string, which can be either 'L', 'C' or 'R'
*
* Default value is 'C'
*
* This setting is relevant only if the text has several lines.
*
* @access public
* @var string;
*/
var $image_text_alignment;
/**
* Sets the text line spacing
*
* Value is an integer, in pixels
*
* Default value is 0
*
* This setting is relevant only if the text has several lines.
*
* @access public
* @var integer
*/
var $image_text_line_spacing;
/**
* Sets the height of the reflection
*
* Value is an integer in pixels, or a string which format can be in pixels or percentage.
* For instance, values can be : 40, '40', '40px' or '40%'
*
* Default value is null, no reflection
*
* @access public
* @var mixed;
*/
var $image_reflection_height;
/**
* Sets the space between the source image and its relection
*
* Value is an integer in pixels, which can be negative
*
* Default value is 2
*
* This setting is relevant only if {@link image_reflection_height} is set
*
* @access public
* @var integer
*/
var $image_reflection_space;
/**
* Sets the color of the reflection background (deprecated)
*
* Value is an hexadecimal color, such as #FFFFFF
*
* Default value is #FFFFFF
*
* This setting is relevant only if {@link image_reflection_height} is set
*
* This setting is now deprecated in favor of {@link image_default_color}
*
* @access public
* @var string;
*/
var $image_reflection_color;
/**
* Sets the initial opacity of the reflection
*
* Value is an integer between 0 (no opacity) and 100 (full opacity).
* The reflection will start from {@link image_reflection_opacity} and end up at 0
*
* Default value is 60
*
* This setting is relevant only if {@link image_reflection_height} is set
*
* @access public
* @var integer
*/
var $image_reflection_opacity;
/**
* Flips the image vertically or horizontally
*
* Value is either 'h' or 'v', as in horizontal and vertical
*
* Default value is null (no flip)
*
* @access public
* @var string;
*/
var $image_flip;
/**
* Rotates the image by increments of 45 degrees
*
* Value is either 90, 180 or 270
*
* Default value is null (no rotation)
*
* @access public
* @var string;
*/
var $image_rotate;
/**
* Crops an image
*
* Values are four dimensions, or two, or one (CSS style)
* They represent the amount cropped top, right, bottom and left.
* These values can either be in an array, or a space separated string.
* Each value can be in pixels (with or without 'px'), or percentage (of the source image)
*
* For instance, are valid:
* <pre>
* $foo->image_crop = 20 OR array(20);
* $foo->image_crop = '20px' OR array('20px');
* $foo->image_crop = '20 40' OR array('20', 40);
* $foo->image_crop = '-20 25%' OR array(-20, '25%');
* $foo->image_crop = '20px 25%' OR array('20px', '25%');
* $foo->image_crop = '20% 25%' OR array('20%', '25%');
* $foo->image_crop = '20% 25% 10% 30%' OR array('20%', '25%', '10%', '30%');
* $foo->image_crop = '20px 25px 2px 2px' OR array('20px', '25%px', '2px', '2px');
* $foo->image_crop = '20 25% 40px 10%' OR array(20, '25%', '40px', '10%');
* </pre>
*
* If a value is negative, the image will be expanded, and the extra parts will be filled with black
*
* Default value is null (no cropping)
*
* @access public
* @var string OR array;
*/
var $image_crop;
/**
* Adds a bevel border on the image
*
* Value is a positive integer, representing the thickness of the bevel
*
* If the bevel colors are the same as the background, it makes a fade out effect
*
* Default value is null (no bevel)
*
* @access public
* @var integer
*/
var $image_bevel;
/**
* Top and left bevel color
*
* Value is a color, in hexadecimal format
* This setting is used only if {@link image_bevel} is set
*
* Default value is #FFFFFF
*
* @access public
* @var string;
*/
var $image_bevel_color1;
/**
* Right and bottom bevel color
*
* Value is a color, in hexadecimal format
* This setting is used only if {@link image_bevel} is set
*
* Default value is #000000
*
* @access public
* @var string;
*/
var $image_bevel_color2;
/**
* Adds a single-color border on the outer of the image
*
* Values are four dimensions, or two, or one (CSS style)
* They represent the border thickness top, right, bottom and left.
* These values can either be in an array, or a space separated string.
* Each value can be in pixels (with or without 'px'), or percentage (of the source image)
*
* See {@link image_crop} for valid formats
*
* If a value is negative, the image will be cropped.
* Note that the dimensions of the picture will be increased by the borders' thickness
*
* Default value is null (no border)
*
* @access public
* @var integer
*/
var $image_border;
/**
* Border color
*
* Value is a color, in hexadecimal format.
* This setting is used only if {@link image_border} is set
*
* Default value is #FFFFFF
*
* @access public
* @var string;
*/
var $image_border_color;
/**
* Adds a multi-color frame on the outer of the image
*
* Value is an integer. Two values are possible for now:
* 1 for flat border, meaning that the frame is mirrored horizontally and vertically
* 2 for crossed border, meaning that the frame will be inversed, as in a bevel effect
*
* The frame will be composed of colored lines set in {@link image_frame_colors}
*
* Note that the dimensions of the picture will be increased by the borders' thickness
*
* Default value is null (no frame)
*
* @access public
* @var integer
*/
var $image_frame;
/**
* Sets the colors used to draw a frame
*
* Values is a list of n colors in hexadecimal format.
* These values can either be in an array, or a space separated string.
*
* The colors are listed in the following order: from the outset of the image to its center
*
* For instance, are valid:
* <pre>
* $foo->image_frame_colors = '#FFFFFF #999999 #666666 #000000';
* $foo->image_frame_colors = array('#FFFFFF', '#999999', '#666666', '#000000');
* </pre>
*
* This setting is used only if {@link image_frame} is set
*
* Default value is '#FFFFFF #999999 #666666 #000000'
*
* @access public
* @var string OR array;
*/
var $image_frame_colors;
/**
* Adds a watermark on the image
*
* Value is a local image filename, relative or absolute. GIF, JPG, BMP and PNG are supported, as well as PNG alpha.
*
* If set, this setting allow the use of all other settings starting with image_watermark_
*
* Default value is null
*
* @access public
* @var string;
*/
var $image_watermark;
/**
* Sets the watermarkposition within the image
*
* Value is one or two out of 'TBLR' (top, bottom, left, right)
*
* The positions are as following: TL T TR
* L R
* BL B BR
*
* Default value is null (centered, horizontal and vertical)
*
* Note that is {@link image_watermark_x} and {@link image_watermark_y} are used, this setting has no effect
*
* @access public
* @var string;
*/
var $image_watermark_position;
/**
* Sets the watermark absolute X position within the image
*
* Value is in pixels, representing the distance between the top of the image and the watermark
* If a negative value is used, it will represent the distance between the bottom of the image and the watermark
*
* Default value is null (so {@link image_watermark_position} is used)
*
* @access public
* @var integer
*/
var $image_watermark_x;
/**
* Sets the twatermark absolute Y position within the image
*
* Value is in pixels, representing the distance between the left of the image and the watermark
* If a negative value is used, it will represent the distance between the right of the image and the watermark
*
* Default value is null (so {@link image_watermark_position} is used)
*
* @access public
* @var integer
*/
var $image_watermark_y;
/**
* Allowed MIME types
*
* Default is a selection of safe mime-types, but you might want to change it
*
* Simple wildcards are allowed, such as image/* or application/*
*
* @access public
* @var array
*/
var $allowed;
/**
* Forbidden MIME types
*
* Default is a selection of safe mime-types, but you might want to change it
* To only check for forbidden MIME types, and allow everything else, set {@link allowed} to array('* / *') without the spaces
*
* Simple wildcards are allowed, such as image/* or application/*
*
* @access public
* @var array
*/
var $forbidden;
/**
* Array of translated error messages
*
* By default, the language is english (en_GB)
* Translations can be in separate files, in a lang/ subdirectory
*
* @access public
* @var array
*/
var $translation;
/**
* Language selected for the translations
*
* By default, the language is english ("en_GB")
*
* @access public
* @var array
*/
var $language;
/**
* Init or re-init all the processing variables to their default values
*
* This function is called in the constructor, and after each call of {@link process}
*
* @access private
*/
function init() {
// overiddable variables
$this->file_new_name_body = ''; // replace the name body
$this->file_name_body_add = ''; // append to the name body
$this->file_new_name_ext = ''; // replace the file extension
$this->file_safe_name = true; // format safely the filename
$this->file_overwrite = false; // allows overwritting if the file already exists
$this->file_auto_rename = true; // auto-rename if the file already exists
$this->dir_auto_create = true; // auto-creates directory if missing
$this->dir_auto_chmod = true; // auto-chmod directory if not writeable
$this->dir_chmod = 0777; // default chmod to use
$this->mime_check = true; // don't check the mime type against the allowed list
$this->mime_magic_check = false; // don't double check the MIME type with mime_magic
$this->no_script = true; // turns scripts into test files
$val = trim(ini_get('upload_max_filesize'));
$last = strtolower($val{strlen($val)-1});
switch($last) {
case 'g':
$val *= 1024;
case 'm':
$val *= 1024;
case 'k':
$val *= 1024;
}
$this->file_max_size = $val;
$this->image_resize = false; // resize the image
$this->image_convert = ''; // convert. values :''; 'png'; 'jpeg'; 'gif'; 'bmp'
$this->image_x = 150;
$this->image_y = 150;
$this->image_ratio = false; // keeps aspect ratio with x and y dimensions
$this->image_ratio_crop = false; // keeps aspect ratio with x and y dimensions, filling the space
$this->image_ratio_fill = false; // keeps aspect ratio with x and y dimensions, fitting the image in the space, and coloring the rest
$this->image_ratio_pixels = false; // keeps aspect ratio, calculating x and y so that the image is approx the set number of pixels
$this->image_ratio_no_zoom_in = false;
$this->image_ratio_no_zoom_out = false;
$this->image_ratio_x = false; // calculate the $image_x if true
$this->image_ratio_y = false; // calculate the $image_y if true
$this->jpeg_quality = 85;
$this->jpeg_size = null;
$this->preserve_transparency = false;
$this->image_is_transparent = false;
$this->image_transparent_color = null;
$this->image_background_color = null;
$this->image_default_color = '#ffffff';
$this->image_is_palette = false;
$this->image_max_width = null;
$this->image_max_height = null;
$this->image_max_pixels = null;
$this->image_max_ratio = null;
$this->image_min_width = null;
$this->image_min_height = null;
$this->image_min_pixels = null;
$this->image_min_ratio = null;
$this->image_brightness = null;
$this->image_contrast = null;
$this->image_threshold = null;
$this->image_tint_color = null;
$this->image_overlay_color = null;
$this->image_overlay_percent = null;
$this->image_negative = false;
$this->image_greyscale = false;
$this->image_text = null;
$this->image_text_direction = null;
$this->image_text_color = '#FFFFFF';
$this->image_text_percent = 100;
$this->image_text_background = null;
$this->image_text_background_percent = 100;
$this->image_text_font = 5;
$this->image_text_x = null;
$this->image_text_y = null;
$this->image_text_position = null;
$this->image_text_padding = 0;
$this->image_text_padding_x = null;
$this->image_text_padding_y = null;
$this->image_text_alignment = 'C';
$this->image_text_line_spacing = 0;
$this->image_reflection_height = null;
$this->image_reflection_space = 2;
$this->image_reflection_color = '#ffffff';
$this->image_reflection_opacity = 60;
$this->image_watermark = null;
$this->image_watermark_x = null;
$this->image_watermark_y = null;
$this->image_watermark_position = null;
$this->image_flip = null;
$this->image_rotate = null;
$this->image_crop = null;
$this->image_bevel = null;
$this->image_bevel_color1 = '#FFFFFF';
$this->image_bevel_color2 = '#000000';
$this->image_border = null;
$this->image_border_color = '#FFFFFF';
$this->image_frame = null;
$this->image_frame_colors = '#FFFFFF #999999 #666666 #000000';
$this->forbidden = array();
$this->allowed = array("application/rar",
"application/x-rar-compressed",
"application/arj",
"application/excel",
"application/gnutar",
"application/octet-stream",
"application/pdf",
"application/powerpoint",
"application/postscript",
"application/plain",
"application/rtf",
"application/vocaltec-media-file",
"application/wordperfect",
"application/x-bzip",
"application/x-bzip2",
"application/x-compressed",
"application/x-excel",
"application/x-gzip",
"application/x-latex",
"application/x-midi",
"application/x-msexcel",
"application/x-rtf",
"application/x-sit",
"application/x-stuffit",
"application/x-shockwave-flash",
"application/x-troff-msvideo",
"application/x-zip-compressed",
"application/xml",
"application/zip",
"application/msword",
"application/mspowerpoint",
"application/vnd.ms-excel",
"application/vnd.ms-powerpoint",
"application/vnd.ms-word",
"application/vnd.ms-word.document.macroEnabled.12",
"application/vnd.openxmlformats-officedocument.wordprocessingml.document",
"application/vnd.ms-word.template.macroEnabled.12",
"application/vnd.openxmlformats-officedocument.wordprocessingml.template",
"application/vnd.ms-powerpoint.template.macroEnabled.12",
"application/vnd.openxmlformats-officedocument.presentationml.template",
"application/vnd.ms-powerpoint.addin.macroEnabled.12",
"application/vnd.ms-powerpoint.slideshow.macroEnabled.12",
"application/vnd.openxmlformats-officedocument.presentationml.slideshow",
"application/vnd.ms-powerpoint.presentation.macroEnabled.12",
"application/vnd.openxmlformats-officedocument.presentationml.presentation",
"application/vnd.ms-excel.addin.macroEnabled.12",
"application/vnd.ms-excel.sheet.binary.macroEnabled.12",
"application/vnd.ms-excel.sheet.macroEnabled.12",
"application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
"application/vnd.ms-excel.template.macroEnabled.12",
"application/vnd.openxmlformats-officedocument.spreadsheetml.template",
"audio/*",
"image/*",
"video/*",
"multipart/x-zip",
"multipart/x-gzip",
"text/richtext",
"text/plain",
"text/xml");
}
/**
* Constructor. Checks if the file has been uploaded
*
* The constructor takes $_FILES['form_field'] array as argument
* where form_field is the form field name
*
* The constructor will check if the file has been uploaded in its temporary location, and
* accordingly will set {@link uploaded} (and {@link error} is an error occurred)
*
* If the file has been uploaded, the constructor will populate all the variables holding the upload
* information (none of the processing class variables are used here).
* You can have access to information about the file (name, size, MIME type...).
*
*
* Alternatively, you can set the first argument to be a local filename (string)
* This allows processing of a local file, as if the file was uploaded
*
* The optional second argument allows you to set the language for the error messages
*
* @access private
* @param array $file $_FILES['form_field']
* or string $file Local filename
* @param string $lang Optional language code
*/
function upload($file, $lang = 'en_GB') {
$this->file_src_name = '';
$this->file_src_name_body = '';
$this->file_src_name_ext = '';
$this->file_src_mime = '';
$this->file_src_size = '';
$this->file_src_error = '';
$this->file_src_pathname = '';
$this->file_src_temp = '';
$this->file_dst_path = '';
$this->file_dst_name = '';
$this->file_dst_name_body = '';
$this->file_dst_name_ext = '';
$this->file_dst_pathname = '';
$this->image_src_x = null;
$this->image_src_y = null;
$this->image_src_bits = null;
$this->image_src_type = null;
$this->image_src_pixels = null;
$this->image_dst_x = 0;
$this->image_dst_y = 0;
$this->uploaded = true;
$this->no_upload_check = false;
$this->processed = true;
$this->error = '';
$this->log = '';
$this->allowed = array();
$this->forbidden = array();
$this->file_is_image = false;
$this->init();
$info = null;
// sets default language
$this->translation = array();
$this->translation['file_error'] = 'File error. Please try again.';
$this->translation['local_file_missing'] = 'Local file doesn\'t exist.';
$this->translation['local_file_not_readable'] = 'Local file is not readable.';
$this->translation['uploaded_too_big_ini'] = 'File upload error (the uploaded file exceeds the upload_max_filesize directive in php.ini).';
$this->translation['uploaded_too_big_html'] = 'File upload error (the uploaded file exceeds the MAX_FILE_SIZE directive that was specified in the html form).';
$this->translation['uploaded_partial'] = 'File upload error (the uploaded file was only partially uploaded).';
$this->translation['uploaded_missing'] = 'File upload error (no file was uploaded).';
$this->translation['uploaded_unknown'] = 'File upload error (unknown error code).';
$this->translation['try_again'] = 'File upload error. Please try again.';
$this->translation['file_too_big'] = 'File too big.';
$this->translation['no_mime'] = 'MIME type can\'t be detected.';
$this->translation['incorrect_file'] = 'Incorrect type of file.';
$this->translation['image_too_wide'] = 'Image too wide.';
$this->translation['image_too_narrow'] = 'Image too narrow.';
$this->translation['image_too_high'] = 'Image too high.';
$this->translation['image_too_short'] = 'Image too short.';
$this->translation['ratio_too_high'] = 'Image ratio too high (image too wide).';
$this->translation['ratio_too_low'] = 'Image ratio too low (image too high).';
$this->translation['too_many_pixels'] = 'Image has too many pixels.';
$this->translation['not_enough_pixels'] = 'Image has not enough pixels.';
$this->translation['file_not_uploaded'] = 'File not uploaded. Can\'t carry on a process.';
$this->translation['already_exists'] = '%s already exists. Please change the file name.';
$this->translation['temp_file_missing'] = 'No correct temp source file. Can\'t carry on a process.';
$this->translation['source_missing'] = 'No correct uploaded source file. Can\'t carry on a process.';
$this->translation['destination_dir'] = 'Destination directory can\'t be created. Can\'t carry on a process.';
$this->translation['destination_dir_missing'] = 'Destination directory doesn\'t exist. Can\'t carry on a process.';
$this->translation['destination_path_not_dir'] = 'Destination path is not a directory. Can\'t carry on a process.';
$this->translation['destination_dir_write'] = 'Destination directory can\'t be made writeable. Can\'t carry on a process.';
$this->translation['destination_path_write'] = 'Destination path is not a writeable. Can\'t carry on a process.';
$this->translation['temp_file'] = 'Can\'t create the temporary file. Can\'t carry on a process.';
$this->translation['source_not_readable'] = 'Source file is not readable. Can\'t carry on a process.';
$this->translation['no_create_support'] = 'No create from %s support.';
$this->translation['create_error'] = 'Error in creating %s image from source.';
$this->translation['source_invalid'] = 'Can\'t read image source. Not an image?.';
$this->translation['gd_missing'] = 'GD doesn\'t seem to be present.';
$this->translation['watermark_no_create_support'] = 'No create from %s support, can\'t read watermark.';
$this->translation['watermark_create_error'] = 'No %s read support, can\'t create watermark.';
$this->translation['watermark_invalid'] = 'Unknown image format, can\'t read watermark.';
$this->translation['file_create'] = 'No %s create support.';
$this->translation['no_conversion_type'] = 'No conversion type defined.';
$this->translation['copy_failed'] = 'Error copying file on the server. copy() failed.';
$this->translation['reading_failed'] = 'Error reading the file.';
// determines the language
$this->lang = $lang;
if ($this->lang != 'en_GB' && file_exists('lang/class.upload.' . $lang . '.php')) {
$translation = null;
include('lang/class.upload.' . $lang . '.php');
if (is_array($translation)) {
$this->translation = array_merge($this->translation, $translation);
} else {
$this->lang = 'en_GB';
}
}
// determines the supported MIME types, and matching image format
$this->image_supported = array();
if ($this->gdversion()) {
if (imagetypes() & IMG_GIF) {
$this->image_supported['image/gif'] = 'gif';
}
if (imagetypes() & IMG_JPG) {
$this->image_supported['image/jpg'] = 'jpg';
$this->image_supported['image/jpeg'] = 'jpg';
$this->image_supported['image/pjpeg'] = 'jpg';
}
if (imagetypes() & IMG_PNG) {
$this->image_supported['image/png'] = 'png';
$this->image_supported['image/x-png'] = 'png';
}
if (imagetypes() & IMG_WBMP) {
$this->image_supported['image/bmp'] = 'bmp';
$this->image_supported['image/x-ms-bmp'] = 'bmp';
$this->image_supported['image/x-windows-bmp'] = 'bmp';
}
}
// display some system information
if (empty($this->log)) {
$this->log .= '<b>system information</b><br />';
$inis = ini_get_all();
$open_basedir = (array_key_exists('open_basedir', $inis) && array_key_exists('local_value', $inis['open_basedir']) && !empty($inis['open_basedir']['local_value'])) ? $inis['open_basedir']['local_value'] : false;
$gd = $this->gdversion() ? $this->gdversion(true) : 'GD not present';
$supported = trim((in_array('png', $this->image_supported) ? 'png' : '') . ' ' . (in_array('jpg', $this->image_supported) ? 'jpg' : '') . ' ' . (in_array('gif', $this->image_supported) ? 'gif' : '') . ' ' . (in_array('bmp', $this->image_supported) ? 'bmp' : ''));
$this->log .= '- GD version : ' . $gd . '<br />';
$this->log .= '- supported image types : ' . (!empty($supported) ? $supported : 'none') . '<br />';
$this->log .= '- open_basedir : ' . (!empty($open_basedir) ? $open_basedir : 'no restriction') . '<br />';
$this->log .= '- language : ' . $this->lang . '<br />';
}
if (!$file) {
$this->uploaded = false;
$this->error = $this->translate('file_error');
}
// check if we sent a local filename rather than a $_FILE element
if (!is_array($file)) {
if (empty($file)) {
$this->uploaded = false;
$this->error = $this->translate('file_error');
} else {
$this->no_upload_check = TRUE;
// this is a local filename, i.e.not uploaded
$this->log .= '<b>' . $this->translate("source is a local file") . ' ' . $file . '</b><br />';
if ($this->uploaded && !file_exists($file)) {
$this->uploaded = false;
$this->error = $this->translate('local_file_missing');
}
if ($this->uploaded && !is_readable($file)) {
$this->uploaded = false;
$this->error = $this->translate('local_file_not_readable');
}
if ($this->uploaded) {
$this->file_src_pathname = $file;
$this->file_src_name = basename($file);
$this->log .= '- local file name OK<br />';
ereg('\.([^\.]*$)', $this->file_src_name, $extension);
if (is_array($extension)) {
$this->file_src_name_ext = strtolower($extension[1]);
$this->file_src_name_body = substr($this->file_src_name, 0, ((strlen($this->file_src_name) - strlen($this->file_src_name_ext)))-1);
} else {
$this->file_src_name_ext = '';
$this->file_src_name_body = $this->file_src_name;
}
$this->file_src_size = (file_exists($file) ? filesize($file) : 0);
// we try to retrieve the MIME type
$info = getimagesize($this->file_src_pathname);
$this->file_src_mime = (is_array($info) && array_key_exists('mime', $info) ? $info['mime'] : null);
// if we don't have a MIME type, we attempt to retrieve it the old way
if (empty($this->file_src_mime)) {
$mime = (is_array($info) && array_key_exists(2, $info) ? $info[2] : null); // 1 = GIF, 2 = JPG, 3 = PNG
$this->file_src_mime = ($mime==IMAGETYPE_GIF ? 'image/gif' : ($mime==IMAGETYPE_JPEG ? 'image/jpeg' : ($mime==IMAGETYPE_PNG ? 'image/png' : ($mime==IMAGETYPE_BMP ? 'image/bmp' : null))));
}
// if we still don't have a MIME type, we attempt to retrieve it otherwise
if (empty($this->file_src_mime) && function_exists('mime_content_type')) {
$this->file_src_mime = mime_content_type($this->file_src_pathname);
}
$this->file_src_error = 0;
// determine whether the file is an image
if (array_key_exists($this->file_src_mime, $this->image_supported)) {
$this->file_is_image = true;
$this->image_src_type = $this->image_supported[$this->file_src_mime];
}
}
}
} else {
// this is an element from $_FILE, i.e. an uploaded file
$this->log .= '<b>source is an uploaded file</b><br />';
if ($this->uploaded) {
$this->file_src_error = $file['error'];
switch($this->file_src_error) {
case 0:
// all is OK
$this->log .= '- upload OK<br />';
break;
case 1:
$this->uploaded = false;
$this->error = $this->translate('uploaded_too_big_ini');
break;
case 2:
$this->uploaded = false;
$this->error = $this->translate('uploaded_too_big_html');
break;
case 3:
$this->uploaded = false;
$this->error = $this->translate('uploaded_partial');
break;
case 4:
$this->uploaded = false;
$this->error = $this->translate('uploaded_missing');
break;
default:
$this->uploaded = false;
$this->error = $this->translate('uploaded_unknown');
}
}
if ($this->uploaded) {
$this->file_src_pathname = $file['tmp_name'];
$this->file_src_name = $file['name'];
if ($this->file_src_name == '') {
$this->uploaded = false;
$this->error = $this->translate('try_again');
}
}
if ($this->uploaded) {
$this->log .= '- file name OK<br />';
ereg('\.([^\.]*$)', $this->file_src_name, $extension);
if (is_array($extension)) {
$this->file_src_name_ext = strtolower($extension[1]);
$this->file_src_name_body = substr($this->file_src_name, 0, ((strlen($this->file_src_name) - strlen($this->file_src_name_ext)))-1);
} else {
$this->file_src_name_ext = '';
$this->file_src_name_body = $this->file_src_name;
}
$this->file_src_size = $file['size'];
$this->file_src_mime = $file['type'];
// if the file is an image, we gather some useful data
if (array_key_exists($this->file_src_mime, $this->image_supported)) {
$this->file_is_image = true;
$this->image_src_type = $this->image_supported[$this->file_src_mime];
$info = @getimagesize($this->file_src_pathname);
}
}
}
// if the file is an image, we gather some useful data
if ($this->file_is_image) {
if (is_array($info)) {
$this->image_src_x = $info[0];
$this->image_src_y = $info[1];
$this->image_src_pixels = $this->image_src_x * $this->image_src_y;
$this->image_src_bits = array_key_exists('bits', $info) ? $info['bits'] : null;
} else {
$this->log .= '- can\'t retrieve image information. open_basedir restriction in place?<br />';
}
}
$this->log .= '- source variables<br />';
$this->log .= ' file_src_name : ' . $this->file_src_name . '<br />';
$this->log .= ' file_src_name_body : ' . $this->file_src_name_body . '<br />';
$this->log .= ' file_src_name_ext : ' . $this->file_src_name_ext . '<br />';
$this->log .= ' file_src_pathname : ' . $this->file_src_pathname . '<br />';
$this->log .= ' file_src_mime : ' . $this->file_src_mime . '<br />';
$this->log .= ' file_src_size : ' . $this->file_src_size . ' (max= ' . $this->file_max_size . ')<br />';
$this->log .= ' file_src_error : ' . $this->file_src_error . '<br />';
if ($this->file_is_image) {
$this->log .= '- source file is an image<br />';
$this->log .= ' image_src_x : ' . $this->image_src_x . '<br />';
$this->log .= ' image_src_y : ' . $this->image_src_y . '<br />';
$this->log .= ' image_src_pixels : ' . $this->image_src_pixels . '<br />';
$this->log .= ' image_src_type : ' . $this->image_src_type . '<br />';
$this->log .= ' image_src_bits : ' . $this->image_src_bits . '<br />';
}
}
/**
* Returns the version of GD
*
* @access public
* @param boolean $full Optional flag to get precise version
* @return float GD version
*/
function gdversion($full = false) {
static $gd_version = null;
static $gd_full_version = null;
if ($gd_version === null) {
if (function_exists('gd_info')) {
$gd = gd_info();
$gd = $gd["GD Version"];
$regex = "/([\d\.]+)/i";
} else {
ob_start();
phpinfo(8);
$gd = ob_get_contents();
ob_end_clean();
$regex = "/\bgd\s+version\b[^\d\n\r]+?([\d\.]+)/i";
}
if (preg_match($regex, $gd, $m)) {
$gd_full_version = (string) $m[1];
$gd_version = (float) $m[1];
} else {
$gd_full_version = 'none';
$gd_version = 0;
}
}
if ($full) {
return $gd_full_version;
} else {
return $gd_version;
}
}
/**
* Creates directories recursively
*
* @access private
* @param string $path Path to create
* @param integer $mode Optional permissions
* @return boolean Success
*/
function rmkdir($path, $mode = 0777) {
return is_dir($path) || ( $this->rmkdir(dirname($path), $mode) && $this->_mkdir($path, $mode) );
}
/**
* Creates directory
*
* @access private
* @param string $path Path to create
* @param integer $mode Optional permissions
* @return boolean Success
*/
function _mkdir($path, $mode = 0777) {
$old = umask(0);
$res = @mkdir($path, $mode);
umask($old);
return $res;
}
/**
* Translate error messages
*
* @access private
* @param string $str Message to translate
* @param array $tokens Optional token values
* @return string Translated string
*/
function translate($str, $tokens = array()) {
if (array_key_exists($str, $this->translation)) $str = $this->translation[$str];
if (is_array($tokens) && sizeof($tokens) > 0) $str = vsprintf($str, $tokens);
return $str;
}
/**
* Creates a container image
*
* @access private
* @param integer $x Width
* @param integer $y Height
* @param boolean $fill Optional flag to draw the background color or not
* @param boolean $trsp Optional flag to set the background to be transparent
* @return resource Container image
*/
function imagecreatenew($x, $y, $fill = true, $trsp = false) {
if ($this->gdversion() >= 2 && !$this->image_is_palette) {
// create a true color image
$dst_im = imagecreatetruecolor($x, $y);
// this preserves transparency in PNGs, in true color
if (empty($this->image_background_color) || $trsp) {
imagealphablending($dst_im, false );
imagefilledrectangle($dst_im, 0, 0, $x, $y, imagecolorallocatealpha($dst_im, 0, 0, 0, 127));
}
} else {
// creates a palette image
$dst_im = imagecreate($x, $y);
// preserves transparency for palette images, if the original image has transparency
if (($fill && $this->image_is_transparent && empty($this->image_background_color)) || $trsp) {
imagefilledrectangle($dst_im, 0, 0, $x, $y, $this->image_transparent_color);
imagecolortransparent($dst_im, $this->image_transparent_color);
}
}
// fills with background color if any is set
if ($fill && !empty($this->image_background_color) && !$trsp) {
sscanf($this->image_background_color, "#%2x%2x%2x", $red, $green, $blue);
$background_color = imagecolorallocate($dst_im, $red, $green, $blue);
imagefilledrectangle($dst_im, 0, 0, $x, $y, $background_color);
}
return $dst_im;
}
/**
* Transfers an image from the container to the destination image
*
* @access private
* @param resource $src_im Container image
* @param resource $dst_im Destination image
* @return resource Destination image
*/
function imagetransfer($src_im, $dst_im) {
if (is_resource($dst_im)) imagedestroy($dst_im);
$dst_im = & $src_im;
return $dst_im;
}
/**
* Merges two images
*
* If the output format is PNG, then we do it pixel per pixel to retain the alpha channel
*
* @access private
* @param resource $dst_img Destination image
* @param resource $src_img Overlay image
* @param int $dst_x x-coordinate of destination point
* @param int $dst_y y-coordinate of destination point
* @param int $src_x x-coordinate of source point
* @param int $src_y y-coordinate of source point
* @param int $src_w Source width
* @param int $src_h Source height
* @param int $pct Optional percentage of the overlay, between 0 and 100 (default: 100)
* @return resource Destination image
*/
function imagecopymergealpha(&$dst_im, &$src_im, $dst_x, $dst_y, $src_x, $src_y, $src_w, $src_h, $pct = 0) {
$dst_x = (int) $dst_x;
$dst_y = (int) $dst_y;
$src_x = (int) $src_x;
$src_y = (int) $src_y;
$src_w = (int) $src_w;
$src_h = (int) $src_h;
$pct = (int) $pct;
$dst_w = imagesx($dst_im);
$dst_h = imagesy($dst_im);
for ($y = $src_y; $y < $src_h; $y++) {
for ($x = $src_x; $x < $src_w; $x++) {
if ($x >= 0 && $x <= $dst_w && $y >= 0 && $y <= $dst_h) {
$dst_pixel = imagecolorsforindex($dst_im, imagecolorat($dst_im, $x + $dst_x, $y + $dst_y));
$src_pixel = imagecolorsforindex($src_im, imagecolorat($src_im, $x + $src_x, $y + $src_y));
$src_alpha = 1 - ($src_pixel['alpha'] / 127);
$dst_alpha = 1 - ($dst_pixel['alpha'] / 127);
$opacity = $src_alpha * $pct / 100;
if ($dst_alpha >= $opacity) $alpha = $dst_alpha;
if ($dst_alpha < $opacity) $alpha = $opacity;
if ($alpha > 1) $alpha = 1;
if ($opacity > 0) {
$dst_red = round(( ($dst_pixel['red'] * $dst_alpha * (1 - $opacity)) ) );
$dst_green = round(( ($dst_pixel['green'] * $dst_alpha * (1 - $opacity)) ) );
$dst_blue = round(( ($dst_pixel['blue'] * $dst_alpha * (1 - $opacity)) ) );
$src_red = round((($src_pixel['red'] * $opacity)) );
$src_green = round((($src_pixel['green'] * $opacity)) );
$src_blue = round((($src_pixel['blue'] * $opacity)) );
$red = round(($dst_red + $src_red ) / ($dst_alpha * (1 - $opacity) + $opacity));
$green = round(($dst_green + $src_green) / ($dst_alpha * (1 - $opacity) + $opacity));
$blue = round(($dst_blue + $src_blue ) / ($dst_alpha * (1 - $opacity) + $opacity));
if ($red > 255) $red = 255;
if ($green > 255) $green = 255;
if ($blue > 255) $blue = 255;
$alpha = round((1 - $alpha) * 127);
$color = imagecolorallocatealpha($dst_im, $red, $green, $blue, $alpha);
imagesetpixel($dst_im, $x + $dst_x, $y + $dst_y, $color);
}
}
}
}
return true;
}
/**
* Actually uploads the file, and act on it according to the set processing class variables
*
* This function copies the uploaded file to the given location, eventually performing actions on it.
* Typically, you can call {@link process} several times for the same file,
* for instance to create a resized image and a thumbnail of the same file.
* The original uploaded file remains intact in its temporary location, so you can use {@link process} several times.
* You will be able to delete the uploaded file with {@link clean} when you have finished all your {@link process} calls.
*
* According to the processing class variables set in the calling file, the file can be renamed,
* and if it is an image, can be resized or converted.
*
* When the processing is completed, and the file copied to its new location, the
* processing class variables will be reset to their default value.
* This allows you to set new properties, and perform another {@link process} on the same uploaded file
*
* If the function is called with a null or empty argument, then it will return the content of the picture
*
* It will set {@link processed} (and {@link error} is an error occurred)
*
* @access public
* @param string $server_path Optional path location of the uploaded file, with an ending slash
* @return string Optional content of the image
*/
function process($server_path = null) {
$this->error = '';
$this->processed = true;
$return_mode = false;
$return_content = null;
if (empty($server_path) || is_null($server_path)) {
$this->log .= '<b>process file and return the content</b><br />';
$return_mode = true;
} else {
if(strtolower(substr(PHP_OS, 0, 3)) === 'win') {
if (substr($server_path, -1, 1) != '\\') $server_path = $server_path . '\\';
} else {
if (substr($server_path, -1, 1) != '/') $server_path = $server_path . '/';
}
$this->log .= '<b>process file to ' . $server_path . '</b><br />';
}
// checks file size and mine type
if ($this->uploaded) {
if ($this->file_src_size > $this->file_max_size ) {
$this->processed = false;
$this->error = $this->translate('file_too_big');
} else {
$this->log .= '- file size OK<br />';
}
// turn dangerous scripts into text files
if ($this->no_script) {
if (((substr($this->file_src_mime, 0, 5) == 'text/' || strpos($this->file_src_mime, 'javascript') !== false) && (substr($this->file_src_name, -4) != '.txt'))
|| preg_match('/\.(php|pl|py|cgi|asp)$/i', $this->file_src_name) || empty($this->file_src_name_ext)) {
$this->file_src_mime = 'text/plain';
$this->log .= '- script ' . $this->file_src_name . ' renamed as ' . $this->file_src_name . '.txt!<br />';
$this->file_src_name_ext .= (empty($this->file_src_name_ext) ? 'txt' : '.txt');
}
}
// checks MIME type with mime_magic
if ($this->mime_magic_check && function_exists('mime_content_type')) {
$detected_mime = mime_content_type($this->file_src_pathname);
if ($this->file_src_mime != $detected_mime) {
$this->log .= '- MIME type detected as ' . $detected_mime . ' but given as ' . $this->file_src_mime . '!<br />';
$this->file_src_mime = $detected_mime;
}
}
if ($this->mime_check && empty($this->file_src_mime)) {
$this->processed = false;
$this->error = $this->translate('no_mime');
} else if ($this->mime_check && !empty($this->file_src_mime) && strpos($this->file_src_mime, '/') !== false) {
list($m1, $m2) = explode('/', $this->file_src_mime);
$allowed = false;
// check wether the mime type is allowed
foreach($this->allowed as $k => $v) {
list($v1, $v2) = explode('/', $v);
if (($v1 == '*' && $v2 == '*') || ($v1 == $m1 && ($v2 == $m2 || $v2 == '*'))) {
$allowed = true;
break;
}
}
// check wether the mime type is forbidden
foreach($this->forbidden as $k => $v) {
list($v1, $v2) = explode('/', $v);
if (($v1 == '*' && $v2 == '*') || ($v1 == $m1 && ($v2 == $m2 || $v2 == '*'))) {
$allowed = false;
break;
}
}
if (!$allowed) {
$this->processed = false;
$this->error = $this->translate('incorrect_file');
} else {
$this->log .= '- file mime OK : ' . $this->file_src_mime . '<br />';
}
} else {
$this->log .= '- file mime OK : ' . $this->file_src_mime . '<br />';
}
// if the file is an image, we can check on its dimensions
// these checks are not available if open_basedir restrictions are in place
if ($this->file_is_image) {
if (is_numeric($this->image_src_x) && is_numeric($this->image_src_y)) {
$ratio = $this->image_src_x / $this->image_src_y;
if (!is_null($this->image_max_width) && $this->image_src_x > $this->image_max_width) {
$this->processed = false;
$this->error = $this->translate('image_too_wide');
}
if (!is_null($this->image_min_width) && $this->image_src_x < $this->image_min_width) {
$this->processed = false;
$this->error = $this->translate('image_too_narrow');
}
if (!is_null($this->image_max_height) && $this->image_src_y > $this->image_max_height) {
$this->processed = false;
$this->error = $this->translate('image_too_high');
}
if (!is_null($this->image_min_height) && $this->image_src_y < $this->image_min_height) {
$this->processed = false;
$this->error = $this->translate('image_too_short');
}
if (!is_null($this->image_max_ratio) && $ratio > $this->image_max_ratio) {
$this->processed = false;
$this->error = $this->translate('ratio_too_high');
}
if (!is_null($this->image_min_ratio) && $ratio < $this->image_min_ratio) {
$this->processed = false;
$this->error = $this->translate('ratio_too_low');
}
if (!is_null($this->image_max_pixels) && $this->image_src_pixels > $this->image_max_pixels) {
$this->processed = false;
$this->error = $this->translate('too_many_pixels');
}
if (!is_null($this->image_min_pixels) && $this->image_src_pixels < $this->image_min_pixels) {
$this->processed = false;
$this->error = $this->translate('not_enough_pixels');
}
} else {
$this->log .= '- no image properties available, can\'t enforce dimension checks : ' . $this->file_src_mime . '<br />';
}
}
} else {
$this->error = $this->translate('file_not_uploaded');
$this->processed = false;
}
if ($this->processed) {
$this->file_dst_path = $server_path;
// repopulate dst variables from src
$this->file_dst_name = $this->file_src_name;
$this->file_dst_name_body = $this->file_src_name_body;
$this->file_dst_name_ext = $this->file_src_name_ext;
if ($this->image_convert != '') { // if we convert as an image
$this->file_dst_name_ext = $this->image_convert;
$this->log .= '- new file name ext : ' . $this->image_convert . '<br />';
}
if ($this->file_new_name_body != '') { // rename file body
$this->file_dst_name_body = $this->file_new_name_body;
$this->log .= '- new file name body : ' . $this->file_new_name_body . '<br />';
}
if ($this->file_new_name_ext != '') { // rename file ext
$this->file_dst_name_ext = $this->file_new_name_ext;
$this->log .= '- new file name ext : ' . $this->file_new_name_ext . '<br />';
}
if ($this->file_name_body_add != '') { // append a bit to the name
$this->file_dst_name_body = $this->file_dst_name_body . $this->file_name_body_add;
$this->log .= '- file name body add : ' . $this->file_name_body_add . '<br />';
}
if ($this->file_safe_name) { // formats the name
$this->file_dst_name_body = str_replace(array(' ', '-'), array('_','_'), $this->file_dst_name_body) ;
$this->file_dst_name_body = ereg_replace('[^A-Za-z0-9_]', '', $this->file_dst_name_body) ;
$this->log .= '- file name safe format<br />';
}
$this->log .= '- destination variables<br />';
if (empty($this->file_dst_path) || is_null($this->file_dst_path)) {
$this->log .= ' file_dst_path : n/a<br />';
} else {
$this->log .= ' file_dst_path : ' . $this->file_dst_path . '<br />';
}
$this->log .= ' file_dst_name_body : ' . $this->file_dst_name_body . '<br />';
$this->log .= ' file_dst_name_ext : ' . $this->file_dst_name_ext . '<br />';
// do we do some image manipulation?
$image_manipulation = ($this->file_is_image && (
$this->image_resize
|| $this->image_convert != ''
|| is_numeric($this->image_brightness)
|| is_numeric($this->image_contrast)
|| is_numeric($this->image_threshold)
|| !empty($this->image_tint_color)
|| !empty($this->image_overlay_color)
|| !empty($this->image_text)
|| $this->image_greyscale
|| $this->image_negative
|| !empty($this->image_watermark)
|| is_numeric($this->image_rotate)
|| is_numeric($this->jpeg_size)
|| !empty($this->image_flip)
|| !empty($this->image_crop)
|| !empty($this->image_border)
|| $this->image_frame > 0
|| $this->image_bevel > 0
|| $this->image_reflection_height));
if ($image_manipulation) {
if ($this->image_convert=='') {
$this->file_dst_name = $this->file_dst_name_body . (!empty($this->file_dst_name_ext) ? '.' . $this->file_dst_name_ext : '');
$this->log .= '- image operation, keep extension<br />';
} else {
$this->file_dst_name = $this->file_dst_name_body . '.' . $this->image_convert;
$this->log .= '- image operation, change extension for conversion type<br />';
}
} else {
$this->file_dst_name = $this->file_dst_name_body . (!empty($this->file_dst_name_ext) ? '.' . $this->file_dst_name_ext : '');
$this->log .= '- no image operation, keep extension<br />';
}
if (!$return_mode) {
if (!$this->file_auto_rename) {
$this->log .= '- no auto_rename if same filename exists<br />';
$this->file_dst_pathname = $this->file_dst_path . $this->file_dst_name;
} else {
$this->log .= '- checking for auto_rename<br />';
$this->file_dst_pathname = $this->file_dst_path . $this->file_dst_name;
$body = $this->file_dst_name_body;
$cpt = 1;
while (@file_exists($this->file_dst_pathname)) {
$this->file_dst_name_body = $body . '_' . $cpt;
$this->file_dst_name = $this->file_dst_name_body . (!empty($this->file_dst_name_ext) ? '.' . $this->file_dst_name_ext : '');
$cpt++;
$this->file_dst_pathname = $this->file_dst_path . $this->file_dst_name;
}
if ($cpt>1) $this->log .= ' auto_rename to ' . $this->file_dst_name . '<br />';
}
$this->log .= '- destination file details<br />';
$this->log .= ' file_dst_name : ' . $this->file_dst_name . '<br />';
$this->log .= ' file_dst_pathname : ' . $this->file_dst_pathname . '<br />';
if ($this->file_overwrite) {
$this->log .= '- no overwrite checking<br />';
} else {
if (@file_exists($this->file_dst_pathname)) {
$this->processed = false;
$this->error = $this->translate('already_exists', array($this->file_dst_name));
} else {
$this->log .= '- ' . $this->file_dst_name . ' doesn\'t exist already<br />';
}
}
}
} else {
$this->processed = false;
}
// if we have already moved the uploaded file, we use the temporary copy as source file, and check if it exists
if (!empty($this->file_src_temp)) {
$this->log .= '- use the temp file instead of the original file since it is a second process<br />';
$this->file_src_pathname = $this->file_src_temp;
if (!file_exists($this->file_src_pathname)) {
$this->processed = false;
$this->error = $this->translate('temp_file_missing');
}
// if we haven't a temp file, and that we do check on uploads, we use is_uploaded_file()
} else if (!$this->no_upload_check) {
if (!is_uploaded_file($this->file_src_pathname)) {
$this->processed = false;
$this->error = $this->translate('source_missing');
}
// otherwise, if we don't check on uploaded files (local file for instance), we use file_exists()
} else {
if (!file_exists($this->file_src_pathname)) {
$this->processed = false;
$this->error = $this->translate('source_missing');
}
}
// checks if the destination directory exists, and attempt to create it
if (!$return_mode) {
if ($this->processed && !file_exists($this->file_dst_path)) {
if ($this->dir_auto_create) {
$this->log .= '- ' . $this->file_dst_path . ' doesn\'t exist. Attempting creation:';
if (!$this->rmkdir($this->file_dst_path, $this->dir_chmod)) {
$this->log .= ' failed<br />';
$this->processed = false;
$this->error = $this->translate('destination_dir');
} else {
$this->log .= ' success<br />';
}
} else {
$this->error = $this->translate('destination_dir_missing');
}
}
if ($this->processed && !is_dir($this->file_dst_path)) {
$this->processed = false;
$this->error = $this->translate('destination_path_not_dir');
}
// checks if the destination directory is writeable, and attempt to make it writeable
$hash = md5($this->file_dst_name_body . rand(1, 1000));
if ($this->processed && !($f = @fopen($this->file_dst_path . $hash . '.' . $this->file_dst_name_ext, 'a+'))) {
if ($this->dir_auto_chmod) {
$this->log .= '- ' . $this->file_dst_path . ' is not writeable. Attempting chmod:';
if (!@chmod($this->file_dst_path, $this->dir_chmod)) {
$this->log .= ' failed<br />';
$this->processed = false;
$this->error = $this->translate('destination_dir_write');
} else {
$this->log .= ' success<br />';
if (!($f = @fopen($this->file_dst_path . $hash . '.' . $this->file_dst_name_ext, 'a+'))) { // we re-check
$this->processed = false;
$this->error = $this->translate('destination_dir_write');
} else {
@fclose($f);
}
}
} else {
$this->processed = false;
$this->error = $this->translate('destination_path_write');
}
} else {
if ($this->processed) @fclose($f);
@unlink($this->file_dst_path . $hash . '.' . $this->file_dst_name_ext);
}
// if we have an uploaded file, and if it is the first process, and if we can't access the file directly (open_basedir restriction)
// then we create a temp file that will be used as the source file in subsequent processes
// the third condition is there to check if the file is not accessible *directly* (it already has positively gone through is_uploaded_file(), so it exists)
if (!$this->no_upload_check && empty($this->file_src_temp) && !file_exists($this->file_src_pathname)) {
$this->log .= '- attempting creating a temp file:';
$hash = md5($this->file_dst_name_body . rand(1, 1000));
if (move_uploaded_file($this->file_src_pathname, $this->file_dst_path . $hash . '.' . $this->file_dst_name_ext)) {
$this->file_src_pathname = $this->file_dst_path . $hash . '.' . $this->file_dst_name_ext;
$this->file_src_temp = $this->file_src_pathname;
$this->log .= ' file created<br />';
$this->log .= ' temp file is: ' . $this->file_src_temp . '<br />';
} else {
$this->log .= ' failed<br />';
$this->processed = false;
$this->error = $this->translate('temp_file');
}
}
}
if ($this->processed) {
if ($image_manipulation) {
// checks if the source file is readable
if ($this->processed && !($f = @fopen($this->file_src_pathname, 'r'))) {
$this->processed = false;
$this->error = $this->translate('source_not_readable');
} else {
@fclose($f);
}
// we now do all the image manipulations
$this->log .= '- image resizing or conversion wanted<br />';
if ($this->gdversion()) {
switch($this->image_src_type) {
case 'jpg':
if (!function_exists('imagecreatefromjpeg')) {
$this->processed = false;
$this->error = $this->translate('no_create_support', array('JPEG'));
} else {
$image_src = @imagecreatefromjpeg($this->file_src_pathname);
if (!$image_src) {
$this->processed = false;
$this->error = $this->translate('create_error', array('JPEG'));
} else {
$this->log .= '- source image is JPEG<br />';
}
}
break;
case 'png':
if (!function_exists('imagecreatefrompng')) {
$this->processed = false;
$this->error = $this->translate('no_create_support', array('PNG'));
} else {
$image_src = @imagecreatefrompng($this->file_src_pathname);
if (!$image_src) {
$this->processed = false;
$this->error = $this->translate('create_error', array('PNG'));
} else {
$this->log .= '- source image is PNG<br />';
}
}
break;
case 'gif':
if (!function_exists('imagecreatefromgif')) {
$this->processed = false;
$this->error = $this->translate('no_create_support', array('GIF'));
} else {
$image_src = @imagecreatefromgif($this->file_src_pathname);
if (!$image_src) {
$this->processed = false;
$this->error = $this->translate('create_error', array('GIF'));
} else {
$this->log .= '- source image is GIF<br />';
}
}
break;
case 'bmp':
if (!method_exists($this, 'imagecreatefrombmp')) {
$this->processed = false;
$this->error = $this->translate('no_create_support', array('BMP'));
} else {
$image_src = @$this->imagecreatefrombmp($this->file_src_pathname);
if (!$image_src) {
$this->processed = false;
$this->error = $this->translate('create_error', array('BMP'));
} else {
$this->log .= '- source image is BMP<br />';
}
}
break;
default:
$this->processed = false;
$this->error = $this->translate('source_invalid');
}
} else {
$this->processed = false;
$this->error = $this->translate('gd_missing');
}
if ($this->processed && $image_src) {
// we have to set image_convert if it is not already
if (empty($this->image_convert)) {
$this->log .= '- setting destination file type to ' . $this->file_src_name_ext . '<br />';
$this->image_convert = $this->file_src_name_ext;
}
if (!in_array($this->image_convert, $this->image_supported)) {
$this->image_convert = 'jpg';
}
// we set the default color to be the background color if we don't output in a transparent format
if ($this->image_convert != 'png' && $this->image_convert != 'gif' && !empty($this->image_default_color) && empty($this->image_background_color)) $this->image_background_color = $this->image_default_color;
if (!empty($this->image_background_color)) $this->image_default_color = $this->image_background_color;
if (empty($this->image_default_color)) $this->image_default_color = '#FFFFFF';
$this->image_src_x = imagesx($image_src);
$this->image_src_y = imagesy($image_src);
$this->image_dst_x = $this->image_src_x;
$this->image_dst_y = $this->image_src_y;
$gd_version = $this->gdversion();
$ratio_crop = null;
if (!imageistruecolor($image_src)) { // $this->image_src_type == 'gif'
$this->log .= '- image is detected as having a palette<br />';
$this->image_is_palette = true;
$this->image_transparent_color = imagecolortransparent($image_src);
if ($this->image_transparent_color >= 0 && imagecolorstotal($image_src) > $this->image_transparent_color) {
$this->image_is_transparent = true;
//$this->image_transparent_color = imagecolorsforindex($image_src, $this->image_transparent_color);
$this->log .= ' palette image is detected as transparent<br />';
}
// if the image has a palette (GIF), we convert it to true color, preserving transparency
$this->log .= ' convert palette image to true color<br />';
$transparent_color = imagecolortransparent($image_src);
if ($transparent_color >= 0 && imagecolorstotal($image_src) > $transparent_color) {
$rgb = imagecolorsforindex($image_src, $transparent_color);
$transparent_color = ($rgb['red'] << 16) | ($rgb['green'] << 8) | $rgb['blue'];
imagecolortransparent($image_src, imagecolorallocate($image_src, 0, 0, 0));
}
$true_color = imagecreatetruecolor($this->image_src_x, $this->image_src_y);
imagealphablending($image_src, false);
imagesavealpha($image_src, true);
imagecopy($true_color, $image_src, 0, 0, 0, 0, $this->image_src_x, $this->image_src_y);
$image_src = $this->imagetransfer($true_color, $image_src);
if ($transparent_color >= 0) {
$this->log .= ' preserve transparency<br />';
imagealphablending($image_src, false);
imagesavealpha($image_src, true);
for ($x = 0; $x < $this->image_src_x; $x++) {
for ($y = 0; $y < $this->image_src_y; $y++) {
if (imagecolorat($image_src, $x, $y) == $transparent_color) imagesetpixel($image_src, $x, $y, 127 << 24);
}
}
}
$this->image_is_palette = false;
}
if ($this->image_resize) {
$this->log .= '- resizing...<br />';
if ($this->image_ratio_x) {
$this->log .= ' calculate x size<br />';
$this->image_dst_x = round(($this->image_src_x * $this->image_y) / $this->image_src_y);
$this->image_dst_y = $this->image_y;
} else if ($this->image_ratio_y) {
$this->log .= ' calculate y size<br />';
$this->image_dst_x = $this->image_x;
$this->image_dst_y = round(($this->image_src_y * $this->image_x) / $this->image_src_x);
} else if (is_numeric($this->image_ratio_pixels)) {
$this->log .= ' calculate x/y size to match a number of pixels<br />';
$pixels = $this->image_src_y * $this->image_src_x;
$diff = sqrt($this->image_ratio_pixels / $pixels);
$this->image_dst_x = round($this->image_src_x * $diff);
$this->image_dst_y = round($this->image_src_y * $diff);
} else if ($this->image_ratio || $this->image_ratio_crop || $this->image_ratio_fill || $this->image_ratio_no_zoom_in || $this->image_ratio_no_zoom_out) {
$this->log .= ' check x/y sizes<br />';
if ((!$this->image_ratio_no_zoom_in && !$this->image_ratio_no_zoom_out)
|| ($this->image_ratio_no_zoom_in && ($this->image_src_x > $this->image_x || $this->image_src_y > $this->image_y))
|| ($this->image_ratio_no_zoom_out && $this->image_src_x < $this->image_x && $this->image_src_y < $this->image_y)) {
$this->image_dst_x = $this->image_x;
$this->image_dst_y = $this->image_y;
if ($this->image_ratio_crop) {
if (!is_string($this->image_ratio_crop)) $this->image_ratio_crop = '';
$this->image_ratio_crop = strtolower($this->image_ratio_crop);
if (($this->image_src_x/$this->image_x) > ($this->image_src_y/$this->image_y)) {
$this->image_dst_y = $this->image_y;
$this->image_dst_x = intval($this->image_src_x*($this->image_y / $this->image_src_y));
$ratio_crop = array();
$ratio_crop['x'] = $this->image_dst_x - $this->image_x;
if (strpos($this->image_ratio_crop, 'l') !== false) {
$ratio_crop['l'] = 0;
$ratio_crop['r'] = $ratio_crop['x'];
} else if (strpos($this->image_ratio_crop, 'r') !== false) {
$ratio_crop['l'] = $ratio_crop['x'];
$ratio_crop['r'] = 0;
} else {
$ratio_crop['l'] = round($ratio_crop['x']/2);
$ratio_crop['r'] = $ratio_crop['x'] - $ratio_crop['l'];
}
$this->log .= ' ratio_crop_x : ' . $ratio_crop['x'] . ' (' . $ratio_crop['l'] . ';' . $ratio_crop['r'] . ')<br />';
if (is_null($this->image_crop)) $this->image_crop = array(0, 0, 0, 0);
} else {
$this->image_dst_x = $this->image_x;
$this->image_dst_y = intval($this->image_src_y*($this->image_x / $this->image_src_x));
$ratio_crop = array();
$ratio_crop['y'] = $this->image_dst_y - $this->image_y;
if (strpos($this->image_ratio_crop, 't') !== false) {
$ratio_crop['t'] = 0;
$ratio_crop['b'] = $ratio_crop['y'];
} else if (strpos($this->image_ratio_crop, 'b') !== false) {
$ratio_crop['t'] = $ratio_crop['y'];
$ratio_crop['b'] = 0;
} else {
$ratio_crop['t'] = round($ratio_crop['y']/2);
$ratio_crop['b'] = $ratio_crop['y'] - $ratio_crop['t'];
}
$this->log .= ' ratio_crop_y : ' . $ratio_crop['y'] . ' (' . $ratio_crop['t'] . ';' . $ratio_crop['b'] . ')<br />';
if (is_null($this->image_crop)) $this->image_crop = array(0, 0, 0, 0);
}
} else if ($this->image_ratio_fill) {
if (!is_string($this->image_ratio_fill)) $this->image_ratio_fill = '';
$this->image_ratio_fill = strtolower($this->image_ratio_fill);
if (($this->image_src_x/$this->image_x) < ($this->image_src_y/$this->image_y)) {
$this->image_dst_y = $this->image_y;
$this->image_dst_x = intval($this->image_src_x*($this->image_y / $this->image_src_y));
$ratio_crop = array();
$ratio_crop['x'] = $this->image_dst_x - $this->image_x;
if (strpos($this->image_ratio_fill, 'l') !== false) {
$ratio_crop['l'] = 0;
$ratio_crop['r'] = $ratio_crop['x'];
} else if (strpos($this->image_ratio_fill, 'r') !== false) {
$ratio_crop['l'] = $ratio_crop['x'];
$ratio_crop['r'] = 0;
} else {
$ratio_crop['l'] = round($ratio_crop['x']/2);
$ratio_crop['r'] = $ratio_crop['x'] - $ratio_crop['l'];
}
$this->log .= ' ratio_fill_x : ' . $ratio_crop['x'] . ' (' . $ratio_crop['l'] . ';' . $ratio_crop['r'] . ')<br />';
if (is_null($this->image_crop)) $this->image_crop = array(0, 0, 0, 0);
} else {
$this->image_dst_x = $this->image_x;
$this->image_dst_y = intval($this->image_src_y*($this->image_x / $this->image_src_x));
$ratio_crop = array();
$ratio_crop['y'] = $this->image_dst_y - $this->image_y;
if (strpos($this->image_ratio_fill, 't') !== false) {
$ratio_crop['t'] = 0;
$ratio_crop['b'] = $ratio_crop['y'];
} else if (strpos($this->image_ratio_fill, 'b') !== false) {
$ratio_crop['t'] = $ratio_crop['y'];
$ratio_crop['b'] = 0;
} else {
$ratio_crop['t'] = round($ratio_crop['y']/2);
$ratio_crop['b'] = $ratio_crop['y'] - $ratio_crop['t'];
}
$this->log .= ' ratio_fill_y : ' . $ratio_crop['y'] . ' (' . $ratio_crop['t'] . ';' . $ratio_crop['b'] . ')<br />';
if (is_null($this->image_crop)) $this->image_crop = array(0, 0, 0, 0);
}
} else {
if (($this->image_src_x/$this->image_x) > ($this->image_src_y/$this->image_y)) {
$this->image_dst_x = $this->image_x;
$this->image_dst_y = intval($this->image_src_y*($this->image_x / $this->image_src_x));
} else {
$this->image_dst_y = $this->image_y;
$this->image_dst_x = intval($this->image_src_x*($this->image_y / $this->image_src_y));
}
}
} else {
$this->log .= ' doesn\'t calculate x/y sizes<br />';
$this->image_dst_x = $this->image_src_x;
$this->image_dst_y = $this->image_src_y;
}
} else {
$this->log .= ' use plain sizes<br />';
$this->image_dst_x = $this->image_x;
$this->image_dst_y = $this->image_y;
}
$image_dst = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y);
if ($gd_version >= 2) {
$res = imagecopyresampled($image_dst, $image_src, 0, 0, 0, 0, $this->image_dst_x, $this->image_dst_y, $this->image_src_x, $this->image_src_y);
} else {
$res = imagecopyresized($image_dst, $image_src, 0, 0, 0, 0, $this->image_dst_x, $this->image_dst_y, $this->image_src_x, $this->image_src_y);
}
$this->log .= ' resized image object created<br />';
$this->log .= ' image_src_x y : ' . $this->image_src_x . ' x ' . $this->image_src_y . '<br />';
$this->log .= ' image_dst_x y : ' . $this->image_dst_x . ' x ' . $this->image_dst_y . '<br />';
} else {
// we only convert, so we link the dst image to the src image
$image_dst = & $image_src;
}
// crop imag (and also crops if image_ratio_crop is used)
if ((!empty($this->image_crop) || !is_null($ratio_crop))) {
if (is_array($this->image_crop)) {
$vars = $this->image_crop;
} else {
$vars = explode(' ', $this->image_crop);
}
if (sizeof($vars) == 4) {
$ct = $vars[0]; $cr = $vars[1]; $cb = $vars[2]; $cl = $vars[3];
} else if (sizeof($vars) == 2) {
$ct = $vars[0]; $cr = $vars[1]; $cb = $vars[0]; $cl = $vars[1];
} else {
$ct = $vars[0]; $cr = $vars[0]; $cb = $vars[0]; $cl = $vars[0];
}
if (strpos($ct, '%')>0) $ct = $this->image_dst_y * (str_replace('%','',$ct) / 100);
if (strpos($cr, '%')>0) $cr = $this->image_dst_x * (str_replace('%','',$cr) / 100);
if (strpos($cb, '%')>0) $cb = $this->image_dst_y * (str_replace('%','',$cb) / 100);
if (strpos($cl, '%')>0) $cl = $this->image_dst_x * (str_replace('%','',$cl) / 100);
if (strpos($ct, 'px')>0) $ct = str_replace('px','',$ct);
if (strpos($cr, 'px')>0) $cr = str_replace('px','',$cr);
if (strpos($cb, 'px')>0) $cb = str_replace('px','',$cb);
if (strpos($cl, 'px')>0) $cl = str_replace('px','',$cl);
$ct = (int) $ct;
$cr = (int) $cr;
$cb = (int) $cb;
$cl = (int) $cl;
// we adjust the cropping if we use image_ratio_crop
if (!is_null($ratio_crop)) {
if (array_key_exists('t', $ratio_crop)) $ct += $ratio_crop['t'];
if (array_key_exists('r', $ratio_crop)) $cr += $ratio_crop['r'];
if (array_key_exists('b', $ratio_crop)) $cb += $ratio_crop['b'];
if (array_key_exists('l', $ratio_crop)) $cl += $ratio_crop['l'];
}
$this->log .= '- crop image : ' . $ct . ' ' . $cr . ' ' . $cb . ' ' . $cl . ' <br />';
$this->image_dst_x = $this->image_dst_x - $cl - $cr;
$this->image_dst_y = $this->image_dst_y - $ct - $cb;
if ($this->image_dst_x < 1) $this->image_dst_x = 1;
if ($this->image_dst_y < 1) $this->image_dst_y = 1;
$tmp = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y);
// we copy the image into the recieving image
imagecopy($tmp, $image_dst, 0, 0, $cl, $ct, $this->image_dst_x, $this->image_dst_y);
// if we crop with negative margins, we have to make sure the extra bits are the right color, or transparent
if ($ct < 0 || $cr < 0 || $cb < 0 || $cl < 0 ) {
// use the background color if present
if (!empty($this->image_background_color)) {
sscanf($this->image_background_color, "#%2x%2x%2x", $red, $green, $blue);
$fill = imagecolorallocate($tmp, $red, $green, $blue);
} else {
$fill = imagecolorallocatealpha($tmp, 0, 0, 0, 127);
}
// fills eventual negative margins
if ($ct < 0) imagefilledrectangle($tmp, 0, 0, $this->image_dst_x, -$ct, $fill);
if ($cr < 0) imagefilledrectangle($tmp, $this->image_dst_x + $cr, 0, $this->image_dst_x, $this->image_dst_y, $fill);
if ($cb < 0) imagefilledrectangle($tmp, 0, $this->image_dst_y + $cb, $this->image_dst_x, $this->image_dst_y, $fill);
if ($cl < 0) imagefilledrectangle($tmp, 0, 0, -$cl, $this->image_dst_y, $fill);
}
// we transfert tmp into image_dst
$image_dst = $this->imagetransfer($tmp, $image_dst);
}
// flip image
if ($gd_version >= 2 && !empty($this->image_flip)) {
$this->image_flip = strtolower($this->image_flip);
$this->log .= '- flip image : ' . $this->image_flip . '<br />';
$tmp = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y);
for ($x = 0; $x < $this->image_dst_x; $x++) {
for ($y = 0; $y < $this->image_dst_y; $y++){
if (strpos($this->image_flip, 'v') !== false) {
imagecopy($tmp, $image_dst, $this->image_dst_x - $x - 1, $y, $x, $y, 1, 1);
} else {
imagecopy($tmp, $image_dst, $x, $this->image_dst_y - $y - 1, $x, $y, 1, 1);
}
}
}
// we transfert tmp into image_dst
$image_dst = $this->imagetransfer($tmp, $image_dst);
}
// rotate image
if ($gd_version >= 2 && is_numeric($this->image_rotate)) {
if (!in_array($this->image_rotate, array(0, 90, 180, 270))) $this->image_rotate = 0;
if ($this->image_rotate != 0) {
if ($this->image_rotate == 90 || $this->image_rotate == 270) {
$tmp = $this->imagecreatenew($this->image_dst_y, $this->image_dst_x);
} else {
$tmp = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y);
}
$this->log .= '- rotate image : ' . $this->image_rotate . '<br />';
for ($x = 0; $x < $this->image_dst_x; $x++) {
for ($y = 0; $y < $this->image_dst_y; $y++){
if ($this->image_rotate == 90) {
imagecopy($tmp, $image_dst, $y, $x, $x, $this->image_dst_y - $y - 1, 1, 1);
} else if ($this->image_rotate == 180) {
imagecopy($tmp, $image_dst, $x, $y, $this->image_dst_x - $x - 1, $this->image_dst_y - $y - 1, 1, 1);
} else if ($this->image_rotate == 270) {
imagecopy($tmp, $image_dst, $y, $x, $this->image_dst_x - $x - 1, $y, 1, 1);
} else {
imagecopy($tmp, $image_dst, $x, $y, $x, $y, 1, 1);
}
}
}
if ($this->image_rotate == 90 || $this->image_rotate == 270) {
$t = $this->image_dst_y;
$this->image_dst_y = $this->image_dst_x;
$this->image_dst_x = $t;
}
// we transfert tmp into image_dst
$image_dst = $this->imagetransfer($tmp, $image_dst);
}
}
// add color overlay
if ($gd_version >= 2 && (is_numeric($this->image_overlay_percent) && $this->image_overlay_percent > 0 && !empty($this->image_overlay_color))) {
$this->log .= '- apply color overlay<br />';
sscanf($this->image_overlay_color, "#%2x%2x%2x", $red, $green, $blue);
$filter = imagecreatetruecolor($this->image_dst_x, $this->image_dst_y);
$color = imagecolorallocate($filter, $red, $green, $blue);
imagefilledrectangle($filter, 0, 0, $this->image_dst_x, $this->image_dst_y, $color);
$this->imagecopymergealpha($image_dst, $filter, 0, 0, 0, 0, $this->image_dst_x, $this->image_dst_y, $this->image_overlay_percent);
imagedestroy($filter);
}
// add brightness, contrast and tint, turns to greyscale and inverts colors
if ($gd_version >= 2 && ($this->image_negative || $this->image_greyscale || is_numeric($this->image_threshold)|| is_numeric($this->image_brightness) || is_numeric($this->image_contrast) || !empty($this->image_tint_color))) {
$this->log .= '- apply tint, light, contrast correction, negative, greyscale and threshold<br />';
if (!empty($this->image_tint_color)) sscanf($this->image_tint_color, "#%2x%2x%2x", $tint_red, $tint_green, $tint_blue);
imagealphablending($image_dst, true);
for($y=0; $y < $this->image_dst_y; $y++) {
for($x=0; $x < $this->image_dst_x; $x++) {
if ($this->image_greyscale) {
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$r = $g = $b = round((0.2125 * $pixel['red']) + (0.7154 * $pixel['green']) + (0.0721 * $pixel['blue']));
$color = imagecolorallocatealpha($image_dst, $r, $g, $b, $pixel['alpha']);
imagesetpixel($image_dst, $x, $y, $color);
}
if (is_numeric($this->image_threshold)) {
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$c = (round($pixel['red'] + $pixel['green'] + $pixel['blue']) / 3) - 127;
$r = $g = $b = ($c > $this->image_threshold ? 255 : 0);
$color = imagecolorallocatealpha($image_dst, $r, $g, $b, $pixel['alpha']);
imagesetpixel($image_dst, $x, $y, $color);
}
if (is_numeric($this->image_brightness)) {
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$r = max(min(round($pixel['red'] + (($this->image_brightness * 2))), 255), 0);
$g = max(min(round($pixel['green'] + (($this->image_brightness * 2))), 255), 0);
$b = max(min(round($pixel['blue'] + (($this->image_brightness * 2))), 255), 0);
$color = imagecolorallocatealpha($image_dst, $r, $g, $b, $pixel['alpha']);
imagesetpixel($image_dst, $x, $y, $color);
}
if (is_numeric($this->image_contrast)) {
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$r = max(min(round(($this->image_contrast + 128) * $pixel['red'] / 128), 255), 0);
$g = max(min(round(($this->image_contrast + 128) * $pixel['green'] / 128), 255), 0);
$b = max(min(round(($this->image_contrast + 128) * $pixel['blue'] / 128), 255), 0);
$color = imagecolorallocatealpha($image_dst, $r, $g, $b, $pixel['alpha']);
imagesetpixel($image_dst, $x, $y, $color);
}
if (!empty($this->image_tint_color)) {
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$r = min(round($tint_red * $pixel['red'] / 169), 255);
$g = min(round($tint_green * $pixel['green'] / 169), 255);
$b = min(round($tint_blue * $pixel['blue'] / 169), 255);
$color = imagecolorallocatealpha($image_dst, $r, $g, $b, $pixel['alpha']);
imagesetpixel($image_dst, $x, $y, $color);
}
if (!empty($this->image_negative)) {
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$r = round(255 - $pixel['red']);
$g = round(255 - $pixel['green']);
$b = round(255 - $pixel['blue']);
$color = imagecolorallocatealpha($image_dst, $r, $g, $b, $pixel['alpha']);
imagesetpixel($image_dst, $x, $y, $color);
}
}
}
}
// adds a border
if ($gd_version >= 2 && !empty($this->image_border)) {
if (is_array($this->image_border)) {
$vars = $this->image_border;
$this->log .= '- add border : ' . implode(' ', $this->image_border) . '<br />';
} else {
$this->log .= '- add border : ' . $this->image_border . '<br />';
$vars = explode(' ', $this->image_border);
}
if (sizeof($vars) == 4) {
$ct = $vars[0]; $cr = $vars[1]; $cb = $vars[2]; $cl = $vars[3];
} else if (sizeof($vars) == 2) {
$ct = $vars[0]; $cr = $vars[1]; $cb = $vars[0]; $cl = $vars[1];
} else {
$ct = $vars[0]; $cr = $vars[0]; $cb = $vars[0]; $cl = $vars[0];
}
if (strpos($ct, '%')>0) $ct = $this->image_dst_y * (str_replace('%','',$ct) / 100);
if (strpos($cr, '%')>0) $cr = $this->image_dst_x * (str_replace('%','',$cr) / 100);
if (strpos($cb, '%')>0) $cb = $this->image_dst_y * (str_replace('%','',$cb) / 100);
if (strpos($cl, '%')>0) $cl = $this->image_dst_x * (str_replace('%','',$cl) / 100);
if (strpos($ct, 'px')>0) $ct = str_replace('px','',$ct);
if (strpos($cr, 'px')>0) $cr = str_replace('px','',$cr);
if (strpos($cb, 'px')>0) $cb = str_replace('px','',$cb);
if (strpos($cl, 'px')>0) $cl = str_replace('px','',$cl);
$ct = (int) $ct;
$cr = (int) $cr;
$cb = (int) $cb;
$cl = (int) $cl;
$this->image_dst_x = $this->image_dst_x + $cl + $cr;
$this->image_dst_y = $this->image_dst_y + $ct + $cb;
if (!empty($this->image_border_color)) sscanf($this->image_border_color, "#%2x%2x%2x", $red, $green, $blue);
// we now create an image, that we fill with the border color
$tmp = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y);
$background = imagecolorallocatealpha($tmp, $red, $green, $blue, 0);
imagefilledrectangle($tmp, 0, 0, $this->image_dst_x, $this->image_dst_y, $background);
// we then copy the source image into the new image, without merging so that only the border is actually kept
imagecopy($tmp, $image_dst, $cl, $ct, 0, 0, $this->image_dst_x - $cr - $cl, $this->image_dst_y - $cb - $ct);
// we transfert tmp into image_dst
$image_dst = $this->imagetransfer($tmp, $image_dst);
}
// add frame border
if (is_numeric($this->image_frame)) {
if (is_array($this->image_frame_colors)) {
$vars = $this->image_frame_colors;
$this->log .= '- add frame : ' . implode(' ', $this->image_frame_colors) . '<br />';
} else {
$this->log .= '- add frame : ' . $this->image_frame_colors . '<br />';
$vars = explode(' ', $this->image_frame_colors);
}
$nb = sizeof($vars);
$this->image_dst_x = $this->image_dst_x + ($nb * 2);
$this->image_dst_y = $this->image_dst_y + ($nb * 2);
$tmp = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y);
imagecopy($tmp, $image_dst, $nb, $nb, 0, 0, $this->image_dst_x - ($nb * 2), $this->image_dst_y - ($nb * 2));
for ($i=0; $i<$nb; $i++) {
sscanf($vars[$i], "#%2x%2x%2x", $red, $green, $blue);
$c = imagecolorallocate($tmp, $red, $green, $blue);
if ($this->image_frame == 1) {
imageline($tmp, $i, $i, $this->image_dst_x - $i -1, $i, $c);
imageline($tmp, $this->image_dst_x - $i -1, $this->image_dst_y - $i -1, $this->image_dst_x - $i -1, $i, $c);
imageline($tmp, $this->image_dst_x - $i -1, $this->image_dst_y - $i -1, $i, $this->image_dst_y - $i -1, $c);
imageline($tmp, $i, $i, $i, $this->image_dst_y - $i -1, $c);
} else {
imageline($tmp, $i, $i, $this->image_dst_x - $i -1, $i, $c);
imageline($tmp, $this->image_dst_x - $nb + $i, $this->image_dst_y - $nb + $i, $this->image_dst_x - $nb + $i, $nb - $i, $c);
imageline($tmp, $this->image_dst_x - $nb + $i, $this->image_dst_y - $nb + $i, $nb - $i, $this->image_dst_y - $nb + $i, $c);
imageline($tmp, $i, $i, $i, $this->image_dst_y - $i -1, $c);
}
}
// we transfert tmp into image_dst
$image_dst = $this->imagetransfer($tmp, $image_dst);
}
// add bevel border
if ($this->image_bevel > 0) {
if (empty($this->image_bevel_color1)) $this->image_bevel_color1 = '#FFFFFF';
if (empty($this->image_bevel_color2)) $this->image_bevel_color2 = '#000000';
sscanf($this->image_bevel_color1, "#%2x%2x%2x", $red1, $green1, $blue1);
sscanf($this->image_bevel_color2, "#%2x%2x%2x", $red2, $green2, $blue2);
$tmp = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y);
imagecopy($tmp, $image_dst, 0, 0, 0, 0, $this->image_dst_x, $this->image_dst_y);
imagealphablending($tmp, true);
for ($i=0; $i<$this->image_bevel; $i++) {
$alpha = round(($i / $this->image_bevel) * 127);
$c1 = imagecolorallocatealpha($tmp, $red1, $green1, $blue1, $alpha);
$c2 = imagecolorallocatealpha($tmp, $red2, $green2, $blue2, $alpha);
imageline($tmp, $i, $i, $this->image_dst_x - $i -1, $i, $c1);
imageline($tmp, $this->image_dst_x - $i -1, $this->image_dst_y - $i, $this->image_dst_x - $i -1, $i, $c2);
imageline($tmp, $this->image_dst_x - $i -1, $this->image_dst_y - $i -1, $i, $this->image_dst_y - $i -1, $c2);
imageline($tmp, $i, $i, $i, $this->image_dst_y - $i -1, $c1);
}
// we transfert tmp into image_dst
$image_dst = $this->imagetransfer($tmp, $image_dst);
}
// add watermark image
if ($this->image_watermark!='' && file_exists($this->image_watermark)) {
$this->log .= '- add watermark<br />';
$this->image_watermark_position = strtolower($this->image_watermark_position);
$watermark_info = getimagesize($this->image_watermark);
$watermark_type = (array_key_exists(2, $watermark_info) ? $watermark_info[2] : null); // 1 = GIF, 2 = JPG, 3 = PNG
$watermark_checked = false;
if ($watermark_type == IMAGETYPE_GIF) {
if (!function_exists('imagecreatefromgif')) {
$this->error = $this->translate('watermark_no_create_support', array('GIF'));
} else {
$filter = @imagecreatefromgif($this->image_watermark);
if (!$filter) {
$this->error = $this->translate('watermark_create_error', array('GIF'));
} else {
$this->log .= ' watermark source image is GIF<br />';
$watermark_checked = true;
}
}
} else if ($watermark_type == IMAGETYPE_JPEG) {
if (!function_exists('imagecreatefromjpeg')) {
$this->error = $this->translate('watermark_no_create_support', array('JPEG'));
} else {
$filter = @imagecreatefromjpeg($this->image_watermark);
if (!$filter) {
$this->error = $this->translate('watermark_create_error', array('JPEG'));
} else {
$this->log .= ' watermark source image is JPEG<br />';
$watermark_checked = true;
}
}
} else if ($watermark_type == IMAGETYPE_PNG) {
if (!function_exists('imagecreatefrompng')) {
$this->error = $this->translate('watermark_no_create_support', array('PNG'));
} else {
$filter = @imagecreatefrompng($this->image_watermark);
if (!$filter) {
$this->error = $this->translate('watermark_create_error', array('PNG'));
} else {
$this->log .= ' watermark source image is PNG<br />';
$watermark_checked = true;
}
}
} else if ($watermark_type == IMAGETYPE_BMP) {
if (!method_exists($this, 'imagecreatefrombmp')) {
$this->error = $this->translate('watermark_no_create_support', array('BMP'));
} else {
$filter = @$this->imagecreatefrombmp($this->image_watermark);
if (!$filter) {
$this->error = $this->translate('watermark_create_error', array('BMP'));
} else {
$this->log .= ' watermark source image is BMP<br />';
$watermark_checked = true;
}
}
} else {
$this->error = $this->translate('watermark_invalid');
}
if ($watermark_checked) {
$watermark_width = imagesx($filter);
$watermark_height = imagesy($filter);
$watermark_x = 0;
$watermark_y = 0;
if (is_numeric($this->image_watermark_x)) {
if ($this->image_watermark_x < 0) {
$watermark_x = $this->image_dst_x - $watermark_width + $this->image_watermark_x;
} else {
$watermark_x = $this->image_watermark_x;
}
} else {
if (strpos($this->image_watermark_position, 'r') !== false) {
$watermark_x = $this->image_dst_x - $watermark_width;
} else if (strpos($this->image_watermark_position, 'l') !== false) {
$watermark_x = 0;
} else {
$watermark_x = ($this->image_dst_x - $watermark_width) / 2;
}
}
if (is_numeric($this->image_watermark_y)) {
if ($this->image_watermark_y < 0) {
$watermark_y = $this->image_dst_y - $watermark_height + $this->image_watermark_y;
} else {
$watermark_y = $this->image_watermark_y;
}
} else {
if (strpos($this->image_watermark_position, 'b') !== false) {
$watermark_y = $this->image_dst_y - $watermark_height;
} else if (strpos($this->image_watermark_position, 't') !== false) {
$watermark_y = 0;
} else {
$watermark_y = ($this->image_dst_y - $watermark_height) / 2;
}
}
imagecopyresampled ($image_dst, $filter, $watermark_x, $watermark_y, 0, 0, $watermark_width, $watermark_height, $watermark_width, $watermark_height);
} else {
$this->error = $this->translate('watermark_invalid');
}
}
// add text
if (!empty($this->image_text)) {
$this->log .= '- add text<br />';
// calculate sizes in human readable format
$src_size = $this->file_src_size / 1024;
$src_size_mb = number_format($src_size / 1024, 1, ".", " ");
$src_size_kb = number_format($src_size, 1, ".", " ");
$src_size_human = ($src_size > 1024 ? $src_size_mb . " MB" : $src_size_kb . " kb");
$this->image_text = str_replace(
array('[src_name]',
'[src_name_body]',
'[src_name_ext]',
'[src_pathname]',
'[src_mime]',
'[src_size]',
'[src_size_kb]',
'[src_size_mb]',
'[src_size_human]',
'[src_x]',
'[src_y]',
'[src_pixels]',
'[src_type]',
'[src_bits]',
'[dst_path]',
'[dst_name_body]',
'[dst_name_ext]',
'[dst_name]',
'[dst_pathname]',
'[dst_x]',
'[dst_y]',
'[date]',
'[time]',
'[host]',
'[server]',
'[ip]',
'[gd_version]'),
array($this->file_src_name,
$this->file_src_name_body,
$this->file_src_name_ext,
$this->file_src_pathname,
$this->file_src_mime,
$this->file_src_size,
$src_size_kb,
$src_size_mb,
$src_size_human,
$this->image_src_x,
$this->image_src_y,
$this->image_src_pixels,
$this->image_src_type,
$this->image_src_bits,
$this->file_dst_path,
$this->file_dst_name_body,
$this->file_dst_name_ext,
$this->file_dst_name,
$this->file_dst_pathname,
$this->image_dst_x,
$this->image_dst_y,
date('Y-m-d'),
date('H:i:s'),
$_SERVER['HTTP_HOST'],
$_SERVER['SERVER_NAME'],
$_SERVER['REMOTE_ADDR'],
$this->gdversion(true)),
$this->image_text);
if (!is_numeric($this->image_text_padding)) $this->image_text_padding = 0;
if (!is_numeric($this->image_text_line_spacing)) $this->image_text_line_spacing = 0;
if (!is_numeric($this->image_text_padding_x)) $this->image_text_padding_x = $this->image_text_padding;
if (!is_numeric($this->image_text_padding_y)) $this->image_text_padding_y = $this->image_text_padding;
$this->image_text_position = strtolower($this->image_text_position);
$this->image_text_direction = strtolower($this->image_text_direction);
$this->image_text_alignment = strtolower($this->image_text_alignment);
// if the font is a string, we assume that we might want to load a font
if (!is_numeric($this->image_text_font) && strlen($this->image_text_font) > 4 && substr(strtolower($this->image_text_font), -4) == '.gdf') {
$this->log .= ' try to load font ' . $this->image_text_font . '... ';
if ($this->image_text_font = @imageloadfont($this->image_text_font)) {
$this->log .= 'success<br />';
} else {
$this->log .= 'error<br />';
$this->image_text_font = 5;
}
}
$text = explode("\n", $this->image_text);
$char_width = imagefontwidth($this->image_text_font);
$char_height = imagefontheight($this->image_text_font);
$text_height = 0;
$text_width = 0;
$line_height = 0;
$line_width = 0;
foreach ($text as $k => $v) {
if ($this->image_text_direction == 'v') {
$h = ($char_width * strlen($v));
if ($h > $text_height) $text_height = $h;
$line_width = $char_height;
$text_width += $line_width + ($k < (sizeof($text)-1) ? $this->image_text_line_spacing : 0);
} else {
$w = ($char_width * strlen($v));
if ($w > $text_width) $text_width = $w;
$line_height = $char_height;
$text_height += $line_height + ($k < (sizeof($text)-1) ? $this->image_text_line_spacing : 0);
}
}
$text_width += (2 * $this->image_text_padding_x);
$text_height += (2 * $this->image_text_padding_y);
$text_x = 0;
$text_y = 0;
if (is_numeric($this->image_text_x)) {
if ($this->image_text_x < 0) {
$text_x = $this->image_dst_x - $text_width + $this->image_text_x;
} else {
$text_x = $this->image_text_x;
}
} else {
if (strpos($this->image_text_position, 'r') !== false) {
$text_x = $this->image_dst_x - $text_width;
} else if (strpos($this->image_text_position, 'l') !== false) {
$text_x = 0;
} else {
$text_x = ($this->image_dst_x - $text_width) / 2;
}
}
if (is_numeric($this->image_text_y)) {
if ($this->image_text_y < 0) {
$text_y = $this->image_dst_y - $text_height + $this->image_text_y;
} else {
$text_y = $this->image_text_y;
}
} else {
if (strpos($this->image_text_position, 'b') !== false) {
$text_y = $this->image_dst_y - $text_height;
} else if (strpos($this->image_text_position, 't') !== false) {
$text_y = 0;
} else {
$text_y = ($this->image_dst_y - $text_height) / 2;
}
}
// add a background, maybe transparent
if (!empty($this->image_text_background)) {
sscanf($this->image_text_background, "#%2x%2x%2x", $red, $green, $blue);
if ($gd_version >= 2 && (is_numeric($this->image_text_background_percent)) && $this->image_text_background_percent >= 0 && $this->image_text_background_percent <= 100) {
$filter = imagecreatetruecolor($text_width, $text_height);
$background_color = imagecolorallocate($filter, $red, $green, $blue);
imagefilledrectangle($filter, 0, 0, $text_width, $text_height, $background_color);
$this->imagecopymergealpha($image_dst, $filter, $text_x, $text_y, 0, 0, $text_width, $text_height, $this->image_text_background_percent);
imagedestroy($filter);
} else {
$background_color = imagecolorallocate($image_dst ,$red, $green, $blue);
imagefilledrectangle($image_dst, $text_x, $text_y, $text_x + $text_width, $text_y + $text_height, $background_color);
}
}
$text_x += $this->image_text_padding_x;
$text_y += $this->image_text_padding_y;
$t_width = $text_width - (2 * $this->image_text_padding_x);
$t_height = $text_height - (2 * $this->image_text_padding_y);
sscanf($this->image_text_color, "#%2x%2x%2x", $red, $green, $blue);
// add the text, maybe transparent
if ($gd_version >= 2 && (is_numeric($this->image_text_percent)) && $this->image_text_percent >= 0 && $this->image_text_percent <= 100) {
if ($t_width < 0) $t_width = 0;
if ($t_height < 0) $t_height = 0;
$filter = $this->imagecreatenew($t_width, $t_height, false, true);
$text_color = imagecolorallocate($filter ,$red, $green, $blue);
foreach ($text as $k => $v) {
if ($this->image_text_direction == 'v') {
imagestringup($filter,
$this->image_text_font,
$k * ($line_width + ($k > 0 && $k < (sizeof($text)) ? $this->image_text_line_spacing : 0)),
$text_height - (2 * $this->image_text_padding_y) - ($this->image_text_alignment == 'l' ? 0 : (($t_height - strlen($v) * $char_width) / ($this->image_text_alignment == 'r' ? 1 : 2))) ,
$v,
$text_color);
} else {
imagestring($filter,
$this->image_text_font,
($this->image_text_alignment == 'l' ? 0 : (($t_width - strlen($v) * $char_width) / ($this->image_text_alignment == 'r' ? 1 : 2))),
$k * ($line_height + ($k > 0 && $k < (sizeof($text)) ? $this->image_text_line_spacing : 0)),
$v,
$text_color);
}
}
$this->imagecopymergealpha($image_dst, $filter, $text_x, $text_y, 0, 0, $t_width, $t_height, $this->image_text_percent);
imagedestroy($filter);
} else {
$text_color = imageColorAllocate($image_dst ,$red, $green, $blue);
foreach ($text as $k => $v) {
if ($this->image_text_direction == 'v') {
imagestringup($image_dst,
$this->image_text_font,
$text_x + $k * ($line_width + ($k > 0 && $k < (sizeof($text)) ? $this->image_text_line_spacing : 0)),
$text_y + $text_height - (2 * $this->image_text_padding_y) - ($this->image_text_alignment == 'l' ? 0 : (($t_height - strlen($v) * $char_width) / ($this->image_text_alignment == 'r' ? 1 : 2))),
$v,
$text_color);
} else {
imagestring($image_dst,
$this->image_text_font,
$text_x + ($this->image_text_alignment == 'l' ? 0 : (($t_width - strlen($v) * $char_width) / ($this->image_text_alignment == 'r' ? 1 : 2))),
$text_y + $k * ($line_height + ($k > 0 && $k < (sizeof($text)) ? $this->image_text_line_spacing : 0)),
$v,
$text_color);
}
}
}
}
// add a reflection
if ($this->image_reflection_height) {
$this->log .= '- add reflection : ' . $this->image_reflection_height . '<br />';
// we decode image_reflection_height, which can be a integer, a string in pixels or percentage
$image_reflection_height = $this->image_reflection_height;
if (strpos($image_reflection_height, '%')>0) $image_reflection_height = $this->image_dst_y * (str_replace('%','',$image_reflection_height / 100));
if (strpos($image_reflection_height, 'px')>0) $image_reflection_height = str_replace('px','',$image_reflection_height);
$image_reflection_height = (int) $image_reflection_height;
if ($image_reflection_height > $this->image_dst_y) $image_reflection_height = $this->image_dst_y;
if (empty($this->image_reflection_opacity)) $this->image_reflection_opacity = 60;
// create the new destination image
$tmp = $this->imagecreatenew($this->image_dst_x, $this->image_dst_y + $image_reflection_height + $this->image_reflection_space, true);
$transparency = $this->image_reflection_opacity;
// copy the original image
imagecopy($tmp, $image_dst, 0, 0, 0, 0, $this->image_dst_x, $this->image_dst_y + ($this->image_reflection_space < 0 ? $this->image_reflection_space : 0));
// we have to make sure the extra bit is the right color, or transparent
if ($image_reflection_height + $this->image_reflection_space > 0) {
// use the background color if present
if (!empty($this->image_background_color)) {
sscanf($this->image_background_color, "#%2x%2x%2x", $red, $green, $blue);
$fill = imagecolorallocate($tmp, $red, $green, $blue);
} else {
$fill = imagecolorallocatealpha($tmp, 0, 0, 0, 127);
}
// fill in from the edge of the extra bit
imagefill($tmp, round($this->image_dst_x / 2), $this->image_dst_y + $image_reflection_height + $this->image_reflection_space - 1, $fill);
}
// copy the reflection
for ($y = 0; $y < $image_reflection_height; $y++) {
for ($x = 0; $x < $this->image_dst_x; $x++) {
$pixel_b = imagecolorsforindex($tmp, imagecolorat($tmp, $x, $y + $this->image_dst_y + $this->image_reflection_space));
$pixel_o = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $this->image_dst_y - $y - 1 + ($this->image_reflection_space < 0 ? $this->image_reflection_space : 0)));
$alpha_o = 1 - ($pixel_o['alpha'] / 127);
$alpha_b = 1 - ($pixel_b['alpha'] / 127);
$opacity = $alpha_o * $transparency / 100;
if ($opacity > 0) {
$red = round((($pixel_o['red'] * $opacity) + ($pixel_b['red'] ) * $alpha_b) / ($alpha_b + $opacity));
$green = round((($pixel_o['green'] * $opacity) + ($pixel_b['green']) * $alpha_b) / ($alpha_b + $opacity));
$blue = round((($pixel_o['blue'] * $opacity) + ($pixel_b['blue'] ) * $alpha_b) / ($alpha_b + $opacity));
$alpha = ($opacity + $alpha_b);
if ($alpha > 1) $alpha = 1;
$alpha = round((1 - $alpha) * 127);
$color = imagecolorallocatealpha($tmp, $red, $green, $blue, $alpha);
imagesetpixel($tmp, $x, $y + $this->image_dst_y + $this->image_reflection_space, $color);
}
}
if ($transparency > 0) $transparency = $transparency - ($this->image_reflection_opacity / $image_reflection_height);
}
// copy the resulting image into the destination image
$this->image_dst_y = $this->image_dst_y + $image_reflection_height + $this->image_reflection_space;
$image_dst = $this->imagetransfer($tmp, $image_dst);
}
// reduce the JPEG image to a set desired size
if (is_numeric($this->jpeg_size) && $this->jpeg_size > 0 && ($this->image_convert == 'jpeg' || $this->image_convert == 'jpg')) {
// inspired by: JPEGReducer class version 1, 25 November 2004, Author: Huda M ElMatsani, justhuda at netscape dot net
$this->log .= '- JPEG desired file size : ' . $this->jpeg_size . '<br />';
// calculate size of each image. 75%, 50%, and 25% quality
ob_start(); imagejpeg($image_dst,'',75); $buffer = ob_get_contents(); ob_end_clean();
$size75 = strlen($buffer);
ob_start(); imagejpeg($image_dst,'',50); $buffer = ob_get_contents(); ob_end_clean();
$size50 = strlen($buffer);
ob_start(); imagejpeg($image_dst,'',25); $buffer = ob_get_contents(); ob_end_clean();
$size25 = strlen($buffer);
// calculate gradient of size reduction by quality
$mgrad1 = 25 / ($size50-$size25);
$mgrad2 = 25 / ($size75-$size50);
$mgrad3 = 50 / ($size75-$size25);
$mgrad = ($mgrad1 + $mgrad2 + $mgrad3) / 3;
// result of approx. quality factor for expected size
$q_factor = round($mgrad * ($this->jpeg_size - $size50) + 50);
if ($q_factor<1) {
$this->jpeg_quality=1;
} elseif ($q_factor>100) {
$this->jpeg_quality=100;
} else {
$this->jpeg_quality=$q_factor;
}
$this->log .= ' JPEG quality factor set to ' . $this->jpeg_quality . '<br />';
}
// converts image from true color, and fix transparency if needed
$this->log .= '- converting...<br />';
switch($this->image_convert) {
case 'gif':
// if the image is true color, we convert it to a palette
if (imageistruecolor($image_dst)) {
$this->log .= ' true color to palette<br />';
// creates a black and white mask
$mask = array(array());
for ($x = 0; $x < $this->image_dst_x; $x++) {
for ($y = 0; $y < $this->image_dst_y; $y++) {
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$mask[$x][$y] = $pixel['alpha'];
}
}
sscanf($this->image_default_color, "#%2x%2x%2x", $red, $green, $blue);
// first, we merge the image with the background color, so we know which colors we will have
for ($x = 0; $x < $this->image_dst_x; $x++) {
for ($y = 0; $y < $this->image_dst_y; $y++) {
if ($mask[$x][$y] > 0){
// we have some transparency. we combine the color with the default color
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
$alpha = ($mask[$x][$y] / 127);
$pixel['red'] = round(($pixel['red'] * (1 -$alpha) + $red * ($alpha)));
$pixel['green'] = round(($pixel['green'] * (1 -$alpha) + $green * ($alpha)));
$pixel['blue'] = round(($pixel['blue'] * (1 -$alpha) + $blue * ($alpha)));
$color = imagecolorallocate($image_dst, $pixel['red'], $pixel['green'], $pixel['blue']);
imagesetpixel($image_dst, $x, $y, $color);
}
}
}
// transfrom the true color image into palette, with it merged default color in
// we will have the best color possible, including the background
if (empty($this->image_background_color)) {
imagetruecolortopalette($image_dst, true, 255);
$transparency = imagecolorallocate($image_dst, 254, 1, 253);
imagecolortransparent($image_dst, $transparency);
// make the transparent areas transparent
for ($x = 0; $x < $this->image_dst_x; $x++) {
for ($y = 0; $y < $this->image_dst_y; $y++) {
// we test wether we have enough opacity to justify keeping the color
if ($mask[$x][$y] > 120) imagesetpixel($image_dst, $x, $y, $transparency);
}
}
}
unset($mask);
}
break;
case 'jpg':
case 'bmp':
// if the image doesn't support any transparency, then we merge it with the default color
$this->log .= ' fills in transparency with default color<br />';
sscanf($this->image_default_color, "#%2x%2x%2x", $red, $green, $blue);
$transparency = imagecolorallocate($image_dst, $red, $green, $blue);
// make the transaparent areas transparent
for ($x = 0; $x < $this->image_dst_x; $x++) {
for ($y = 0; $y < $this->image_dst_y; $y++) {
// we test wether we have some transparency, in which case we will merge the colors
$pixel = imagecolorsforindex($image_dst, imagecolorat($image_dst, $x, $y));
if ($pixel['alpha'] == 127) {
// we have full transparency. we make the pixel transparent
imagesetpixel($image_dst, $x, $y, $transparency);
} else if ($pixel['alpha'] > 0) {
// we have some transparency. we combine the color with the default color
$alpha = ($pixel['alpha'] / 127);
$pixel['red'] = round(($pixel['red'] * (1 -$alpha) + $red * ($alpha)));
$pixel['green'] = round(($pixel['green'] * (1 -$alpha) + $green * ($alpha)));
$pixel['blue'] = round(($pixel['blue'] * (1 -$alpha) + $blue * ($alpha)));
$color = imagecolorclosest($image_dst, $pixel['red'], $pixel['green'], $pixel['blue']);
imagesetpixel($image_dst, $x, $y, $color);
}
}
}
break;
default:
break;
}
// outputs image
$this->log .= '- saving image...<br />';
switch($this->image_convert) {
case 'jpeg':
case 'jpg':
if (!$return_mode) {
$result = @imagejpeg($image_dst, $this->file_dst_pathname, $this->jpeg_quality);
} else {
ob_start();
$result = @imagejpeg($image_dst, '', $this->jpeg_quality);
$return_content = ob_get_contents();
ob_end_clean();
}
if (!$result) {
$this->processed = false;
$this->error = $this->translate('file_create', array('JPEG'));
} else {
$this->log .= ' JPEG image created<br />';
}
break;
case 'png':
imagealphablending( $image_dst, false );
imagesavealpha( $image_dst, true );
if (!$return_mode) {
$result = @imagepng($image_dst, $this->file_dst_pathname);
} else {
ob_start();
$result = @imagepng($image_dst);
$return_content = ob_get_contents();
ob_end_clean();
}
if (!$result) {
$this->processed = false;
$this->error = $this->translate('file_create', array('PNG'));
} else {
$this->log .= ' PNG image created<br />';
}
break;
case 'gif':
if (!$return_mode) {
$result = @imagegif($image_dst, $this->file_dst_pathname);
} else {
ob_start();
$result = @imagegif($image_dst);
$return_content = ob_get_contents();
ob_end_clean();
}
if (!$result) {
$this->processed = false;
$this->error = $this->translate('file_create', array('GIF'));
} else {
$this->log .= ' GIF image created<br />';
}
break;
case 'bmp':
if (!$return_mode) {
$result = $this->imagebmp($image_dst, $this->file_dst_pathname);
} else {
ob_start();
$result = $this->imagebmp($image_dst);
$return_content = ob_get_contents();
ob_end_clean();
}
if (!$result) {
$this->processed = false;
$this->error = $this->translate('file_create', array('BMP'));
} else {
$this->log .= ' BMP image created<br />';
}
break;
default:
$this->processed = false;
$this->error = $this->translate('no_conversion_type');
}
if ($this->processed) {
if (is_resource($image_src)) imagedestroy($image_src);
if (is_resource($image_dst)) imagedestroy($image_dst);
$this->log .= ' image objects destroyed<br />';
}
}
} else {
$this->log .= '- no image processing wanted<br />';
if (!$return_mode) {
// copy the file to its final destination. we don't use move_uploaded_file here
// if we happen to have open_basedir restrictions, it is a temp file that we copy, not the original uploaded file
if (!copy($this->file_src_pathname, $this->file_dst_pathname)) {
$this->processed = false;
$this->error = $this->translate('copy_failed');
}
} else {
// returns the file, so that its content can be received by the caller
$return_content = @file_get_contents($this->file_src_pathname);
if ($return_content === FALSE) {
$this->processed = false;
$this->error = $this->translate('reading_failed');
}
}
}
}
if ($this->processed) {
$this->log .= '- <b>process OK</b><br />';
}
// we reinit all the vars
$this->init();
// we may return the image content
if ($return_mode) return $return_content;
}
/**
* Deletes the uploaded file from its temporary location
*
* When PHP uploads a file, it stores it in a temporary location.
* When you {@link process} the file, you actually copy the resulting file to the given location, it doesn't alter the original file.
* Once you have processed the file as many times as you wanted, you can delete the uploaded file.
* If there is open_basedir restrictions, the uploaded file is in fact a temporary file
*
* You might want not to use this function if you work on local files, as it will delete the source file
*
* @access public
*/
function clean() {
$this->log .= '<b>cleanup</b><br />';
$this->log .= '- delete temp file ' . $this->file_src_pathname . '<br />';
@unlink($this->file_src_pathname);
}
/**
* Opens a BMP image
*
* This function has been written by DHKold, and is used with permission of the author
*
* @access public
*/
function imagecreatefrombmp($filename) {
if (! $f1 = fopen($filename,"rb")) return false;
$file = unpack("vfile_type/Vfile_size/Vreserved/Vbitmap_offset", fread($f1,14));
if ($file['file_type'] != 19778) return false;
$bmp = unpack('Vheader_size/Vwidth/Vheight/vplanes/vbits_per_pixel'.
'/Vcompression/Vsize_bitmap/Vhoriz_resolution'.
'/Vvert_resolution/Vcolors_used/Vcolors_important', fread($f1,40));
$bmp['colors'] = pow(2,$bmp['bits_per_pixel']);
if ($bmp['size_bitmap'] == 0) $bmp['size_bitmap'] = $file['file_size'] - $file['bitmap_offset'];
$bmp['bytes_per_pixel'] = $bmp['bits_per_pixel']/8;
$bmp['bytes_per_pixel2'] = ceil($bmp['bytes_per_pixel']);
$bmp['decal'] = ($bmp['width']*$bmp['bytes_per_pixel']/4);
$bmp['decal'] -= floor($bmp['width']*$bmp['bytes_per_pixel']/4);
$bmp['decal'] = 4-(4*$bmp['decal']);
if ($bmp['decal'] == 4) $bmp['decal'] = 0;
$palette = array();
if ($bmp['colors'] < 16777216) {
$palette = unpack('V'.$bmp['colors'], fread($f1,$bmp['colors']*4));
}
$im = fread($f1,$bmp['size_bitmap']);
$vide = chr(0);
$res = imagecreatetruecolor($bmp['width'],$bmp['height']);
$P = 0;
$Y = $bmp['height']-1;
while ($Y >= 0) {
$X=0;
while ($X < $bmp['width']) {
if ($bmp['bits_per_pixel'] == 24)
$color = unpack("V",substr($im,$P,3).$vide);
elseif ($bmp['bits_per_pixel'] == 16) {
$color = unpack("n",substr($im,$P,2));
$color[1] = $palette[$color[1]+1];
} elseif ($bmp['bits_per_pixel'] == 8) {
$color = unpack("n",$vide.substr($im,$P,1));
$color[1] = $palette[$color[1]+1];
} elseif ($bmp['bits_per_pixel'] == 4) {
$color = unpack("n",$vide.substr($im,floor($P),1));
if (($P*2)%2 == 0) $color[1] = ($color[1] >> 4) ; else $color[1] = ($color[1] & 0x0F);
$color[1] = $palette[$color[1]+1];
} elseif ($bmp['bits_per_pixel'] == 1) {
$color = unpack("n",$vide.substr($im,floor($P),1));
if (($P*8)%8 == 0) $color[1] = $color[1] >>7;
elseif (($P*8)%8 == 1) $color[1] = ($color[1] & 0x40)>>6;
elseif (($P*8)%8 == 2) $color[1] = ($color[1] & 0x20)>>5;
elseif (($P*8)%8 == 3) $color[1] = ($color[1] & 0x10)>>4;
elseif (($P*8)%8 == 4) $color[1] = ($color[1] & 0x8)>>3;
elseif (($P*8)%8 == 5) $color[1] = ($color[1] & 0x4)>>2;
elseif (($P*8)%8 == 6) $color[1] = ($color[1] & 0x2)>>1;
elseif (($P*8)%8 == 7) $color[1] = ($color[1] & 0x1);
$color[1] = $palette[$color[1]+1];
} else
return FALSE;
imagesetpixel($res,$X,$Y,$color[1]);
$X++;
$P += $bmp['bytes_per_pixel'];
}
$Y--;
$P+=$bmp['decal'];
}
fclose($f1);
return $res;
}
/**
* Saves a BMP image
*
* This function has been published on the PHP website, and can be used freely
*
* @access public
*/
function imagebmp(&$im, $filename = "") {
if (!$im) return false;
$w = imagesx($im);
$h = imagesy($im);
$result = '';
// if the image is not true color, we convert it first
if (!imageistruecolor($im)) {
$tmp = imagecreatetruecolor($w, $h);
imagecopy($tmp, $im, 0, 0, 0, 0, $w, $h);
imagedestroy($im);
$im = & $tmp;
}
$biBPLine = $w * 3;
$biStride = ($biBPLine + 3) & ~3;
$biSizeImage = $biStride * $h;
$bfOffBits = 54;
$bfSize = $bfOffBits + $biSizeImage;
$result .= substr('BM', 0, 2);
$result .= pack ('VvvV', $bfSize, 0, 0, $bfOffBits);
$result .= pack ('VVVvvVVVVVV', 40, $w, $h, 1, 24, 0, $biSizeImage, 0, 0, 0, 0);
$numpad = $biStride - $biBPLine;
for ($y = $h - 1; $y >= 0; --$y) {
for ($x = 0; $x < $w; ++$x) {
$col = imagecolorat ($im, $x, $y);
$result .= substr(pack ('V', $col), 0, 3);
}
for ($i = 0; $i < $numpad; ++$i)
$result .= pack ('C', 0);
}
if($filename==""){
echo $result;
} else {
$file = fopen($filename, "wb");
fwrite($file, $result);
fclose($file);
}
return true;
}
}
?>ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.