no name resolution between 2 cisco 3640.

clynch302 used Ask the Experts™
I have 2 ciscos 3640 routers connected with a T1. On one side the network is a 192.168.1.x and on the other side its a 192.168.10.x. I sit on the 192.168.1.x side. When I monitor traffic I get name resolutions on the workstions on my side but only IP's for the workstation on the other side. What is need in the router config to allow resolving ip to name between the 2 networks?

My DHCP and DNS servers are located on the 192.168.1.x network.

Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Les MooreSr. Systems Engineer
Top Expert 2008

The nameserver that you have in the config should have all the records for both sides. If it doesn't then the remote site hosts are not registering with it or they have their own dns server.
It is a dns server issue and not a router configuration issue.
Technical Lead Manager (Owner)
At witch point are you monitoring traffic, and how did  you monitor the traffic, could you provide more details?

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial