Looking for Terminal Services Connection Information for a firewall

Hello All,

I have got a Symantec Gateway Security 5440 Firewall and I cannot find the Terminal Services connection information anywhere.

Because they have been discontinued by symantec they no longer hold the information on their web site.

Anybody have any ideas what it is?

ta
LVL 2
WebSvrProAsked:
Who is Participating?
 
dpk_walConnect With a Mentor Commented:
Please have a look at the article below:
http://service1.symantec.com/support/ent-gate.nsf/854fa02b4f5013678825731a007d06af/b1a17caa0c2bb16588256ccb00645f50?OpenDocument

The details are:
settings for COM1:
Bits per second:115200
Data Bits:8
Parity: None
Stop Bits:1
Flow Control: None

Thank you.
0
 
dpk_walCommented:
Although I have not worked with Symantec Gateway Security 5440 Firewall but I do not understand your question. You wish to allow RDP to an internal machine behind the firewall or you wish to enable RDP itself to the firewall. In any case you would need to add a service to allow the TCP 3389 ports [default port for RDP or terminal services] and then configure the firewall to forward to an internal server or the firewall itself.

Please provide details also update if have missed anything.

Thank you.
0
 
WebSvrProAuthor Commented:
no I don't want to RDP Into it.

I want to use either PuTTY or HyperTerminal.

Any ideas on that the connection information is?
0
 
WebSvrProAuthor Commented:
Good but slow responce from the exchange!
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.