EPSON LQ-300 II
Hello Experts,
I am using the EPSON LQ-300 II to print vouchers via a web-program, the print settings had been configured to the size of 8.25*9.5 as the size of the papers (they are 3 papers, one for the customer and 2 stay at the office), when I try to print an invoice, it pulls more than one paper, so I'd to roll the paper back, how can I achieve a better solution?knowing that it was running in that way from 7 days ago. (I am running XP SP2)
Regards
I am using the EPSON LQ-300 II to print vouchers via a web-program, the print settings had been configured to the size of 8.25*9.5 as the size of the papers (they are 3 papers, one for the customer and 2 stay at the office), when I try to print an invoice, it pulls more than one paper, so I'd to roll the paper back, how can I achieve a better solution?knowing that it was running in that way from 7 days ago. (I am running XP SP2)
Regards
ASKER
I just need to set the printer to print one page and stop, not to continue rolling out papers.
Understood. I will be there tomorrow and should have something posted by late afternoon EST.
ASKER
Any Comment yet!
I had to go back and revisit the adventures of configuring these things. I remember why we switched to laser printers. ; )
Our printers are Epson 2080 and 2090.
With that said, there is a tear-off option was not configured properly and the forms line was set to high. I am working with the helpdesk guy that found the settings.
Our printers are Epson 2080 and 2090.
With that said, there is a tear-off option was not configured properly and the forms line was set to high. I am working with the helpdesk guy that found the settings.
ASKER
Ok,
Thanks a lot for your collaboration.
Waiting your feedback
Thanks a lot for your collaboration.
Waiting your feedback
Sorry again for the delay in responding.
I can't find the tech. I did find the notes I kept on this and I am looking through a link I saved:
http://files.support.epson.com/pdf/lq300_/lq300_u1.pdf
I will post the steps to the fix shortly. Essentially the problem is the page size settings on the printer aren't correct. How to set them is the trick.
I can't find the tech. I did find the notes I kept on this and I am looking through a link I saved:
http://files.support.epson.com/pdf/lq300_/lq300_u1.pdf
I will post the steps to the fix shortly. Essentially the problem is the page size settings on the printer aren't correct. How to set them is the trick.
I am going to throw a few different ideas at you as I fought with this beast for some time and can't remember the exact "thing" that worked. I just remember toying with it and then handing it off to the helpdesk to implement. Here we go.
Make sure you set the paper starting point:
adjusting.steps.bmp
Make sure you set the paper starting point:
adjusting.steps.bmp
ASKER
yeah, I am searching how to set the page size
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Since you will probably be printing on continous paper, you will need the tractor feed. Pages 42-46 cover how to set the printer up with the tractor feed. Not sure this was an issue for us. I think the problem lied with setting up the page sizes.
page 56-62 discuss how to set the printer's page sizes. not much help as it doesn't offer up line count but it could help if you can't get your program to set the page size.
What info are you looking for?