• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 227
  • Last Modified:

Installed USB 2.0 PCI Card

Hi All

I recently installed the above card type and now the card doesnt seem to work.  It came with a CD with Drivers, but I geta message in Device Manager saying Error Code 10:-  Yellow exclamation mark:-

"VIA USB 2.0 Enhanced Host Controller' entry under the 'Universal Serial Bus controllers' device type and under Properties the Device Status reads as follows: 'This device is either not present, not working properly, or does not have all the drivers installed (Code 10)'

Tried installing the drivers on the CD, but no joy. Any ideas, how to resolve??


1 Solution
USe the upgrade drivers option and internet search and see if it finds newer drivers.

If it still does not work, return the car and get a different brand.

I hope this helps !
I had one like this recently, where I had to send the wizard to the specific location containing the driver. It then told me it didn't recommend this driver as it was not specifically for my hardware (but it was). Once I insisted, it installed and worked fine. The card had a NEC chipset.

Chris B
It might be a resource conflict.
If the motherboard has an onboard USB, try disabling it in the bios.
Try the pci card in a different slot.
fingwongAuthor Commented:
Tried another PCI Slot and it then worked fine.

Thanks very much
Thank you much.    : )
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Protect Your Employees from Wi-Fi Threats

As Wi-Fi growth and popularity continues to climb, not everyone understands the risks that come with connecting to public Wi-Fi or even offering Wi-Fi to employees, visitors and guests. Download the resource kit to make sure your safe wherever business takes you!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now