Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

FreeBSD doesn't see Belkin F5D7050 v. 5000 wireless USB attennae

Posted on 2008-11-15
67
Medium Priority
?
3,093 Views
Last Modified: 2013-12-09
I have more information but the situation is I blew $43 on a wireless rigamorole because that's
the only *@&#*@ing way I get a wire to my computer here in Berkeley.  Now I have to run Windoze and WIndoze is too stupid to see all the nice things I did on the FreeBSD partition unlike the vica versa situation.  I should have saved stuff on a flash from my partner but oh well.

I think I need the zyd loaded.. I tried to build ndis I used ndisgen with the *.inf and *.sys files in the Win32XP directory of the driver disk.. I tried adding the *.cat file.. I created the *.ko file and kldload caused reboot.  
0
Comment
Question by:kayvey
  • 55
  • 12
67 Comments
 

Author Comment

by:kayvey
ID: 22969848
KV_BSD% su -
Password:
KV_BSD# cd wi_driver
KV_BSD# ls
BLKWGU.inf      BLKWGU_sys.ko   blkwgu.cat      probes
BLKWGU.sys      README          blkwgu.cat.ko
KV_BSD# cat README
       ==================================================================
        ------------------ Windows(r) driver converter -------------------
        ==================================================================

                        Kernel module generation


        The script will now try to generate the kernel driver module.
        This is the last step. Once this module is generated, you should
        be able to load it just like any other FreeBSD driver module.

        Press enter to compile the stub module and generate the driver
        module now:

        Generating Makefile... done.
        Building kernel module... done.
        Cleaning up... done.

        The file BLKWGU_sys.ko has been successfully generated.
        You can kldload this module to get started.

        Press return to exit.

KV_BSD#
0
 

Author Comment

by:kayvey
ID: 22969850
KV_BSD# mount -t cd9660 /dev/acd0 /mnt/drive
KV_BSD# cd /mnt/drive
KV_BSD# ls
AUTORUN.INF             Belkin.ico              Installer.exe           UserManual
Acrobat Reader          InstallationFiles       Installer.ini
KV_BSD#
0
 

Author Comment

by:kayvey
ID: 22969852
KV_BSD# cat /root/probes
cat: /root/probes: No such file or directory
KV_BSD# cat /root/wi_driver/probes
Script started on Sat Nov 15 16:52:27 2008

KV_BSD# pciconf -lv
hostb0@pci0:0:0:0:      class=0x060000 card=0x186a1043 chip=0x33408086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82855PM Processor to I/O Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:       class=0x060400 card=0x00000000 chip=0x33418086 rev=0x21 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82855PM Processor to AGP Controller'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:      class=0x0c0300 card=0x18691043 chip=0x24c28086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:      class=0x0c0300 card=0x18691043 chip=0x24c48086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2:      class=0x0c0300 card=0x18691043 chip=0x24c78086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:      class=0x0c0320 card=0x18681043 chip=0x24cd8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller'
    class      = serial bus
    subclass   = USB
pcib2@pci0:0:30:0:      class=0x060400 card=0x00000000 chip=0x24488086 rev=0x83 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:      class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DBM (ICH4-M) LPC Interface Bridge'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:      class=0x01018a card=0x18691043 chip=0x24ca8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
    class      = mass storage
    subclass   = ATA
none0@pci0:0:31:5:      class=0x040100 card=0x17131043 chip=0x24c58086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
    class      = multimedia
    subclass   = audio
none1@pci0:0:31:6:      class=0x070300 card=0x18261043 chip=0x24c68086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller'
    class      = simple comms
    subclass   = generic modem
vgapci0@pci0:1:0:0:      class=0x030000 card=0x17721043 chip=0x4e501002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'Mobility Radeon 9700 (M10 NP) (RV350)'
    class      = display
    subclass   = VGA
bge0@pci0:2:0:0:      class=0x020000 card=0x17351043 chip=0x169c14e4 rev=0x03 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM5788 Broadcom NetLink (TM) Gigabit Ethernet'
    class      = network
    subclass   = ethernet
cbb0@pci0:2:1:0:      class=0x060700 card=0x18641043 chip=0x04761180 rev=0xac hdr=0x02
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'unknown Ricoh R/RL/5C476(II)'
    class      = bridge
    subclass   = PCI-CardBus
cbb1@pci0:2:1:1:      class=0x060700 card=0x18641043 chip=0x04761180 rev=0xac hdr=0x02
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'unknown Ricoh R/RL/5C476(II)'
    class      = bridge
    subclass   = PCI-CardBus
fwohci0@pci0:2:1:2:      class=0x0c0010 card=0x18671043 chip=0x05521180 rev=0x04 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'RL5c552 IEEE-1394 Controller'
    class      = serial bus
    subclass   = FireWire
none2@pci0:2:2:0:      class=0x028000 card=0x10008086 chip=0x42238086 rev=0x05 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '2915ABG Intel (R) PRO/Wireless 2200BG Network Connection, (R) PRO/Wireless 2915ABG Network Connection'
    class      = network
KV_BSD# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: low speed, power 100 mA, config 1, USB Optical Mouse(0xc019), Logitech(0x046d), rev 43.01
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: high speed, power 500 mA, config 1, Belkin Wireless G USB Adapter(0x705e), vendor 0x050d(0x050d), rev 2.00
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
KV_BSD# exit

Script done on Sat Nov 15 16:53:46 2008

FreeBSD 7.0                    September 6, 2007                   FreeBSD 7.0
KV_BSD# man an | grep Belkin
KV_BSD# man awi | grep Belkin
KV_BSD# man ipw | grep Belkin
KV_BSD# set -o vi
KV_BSD# man iwi | grep Belkin
KV_BSD# man ral | grep Belkin
     Belkin F5D7000 v3            RT2560     PCI
     Belkin F5D7010 v2            RT2560     CardBus
KV_BSD# man rum | grep Belkin
     Belkin F5D7050 ver 3         USB
     Belkin F5D9050 ver 3         USB
KV_BSD# man ural | grep Belkin
     Belkin F5D7050 v2000         USB
KV_BSD# man wi | grep Belkin
     Belkin F5D6000 (a rebadged WL11000P)
KV_BSD# man zyd | grep Belkin
           Belkin F5D7050 v.4000
KV_BSD#

ddr 2> on uhub3
KV_BSD# dmesg | grep Belkin
ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev 2.00/2.00, addr 2> on uhub3
ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev 2.00/2.00, addr 2> on uhub3
ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev 2.00/2.00, addr 2> on uhub3
ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev 2.00/2.00, addr 2> on uhub3
KV_BSD#


K7SF5D7050E corresponds to version 5xxx
KV_BSD#

0
Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 

Author Comment

by:kayvey
ID: 22969863
it has the serial number K7SF5D7050E and on a belkin website I found that it is called version 5000..
you can see from my probes, that I investigated all of FreeBSD's Belkin capability.  I saw some bad news
ppl saying it's futile to run FreeBSD on Belkin.  It looks like there isn't a most recent interface..
the closest one is zyd that supports version 4000
0
 

Author Comment

by:kayvey
ID: 22969865
Here is the stuff on the CD.. that's what I tried to do ndisgen on

KV_BSD# pwd
/mnt/drive
KV_BSD# ls
AUTORUN.INF            Belkin.ico            Installer.exe            UserManual
Acrobat Reader            InstallationFiles      Installer.ini
KV_BSD# cd InstallationFiles
KV_BSD# ls
Belkin.bmp      Setup.exe      VistaX64      WinXP2K            data1.hdr      layout.bin
ISSetup.dll      Setup.ini      VistaX86      _Setup.dll      data2.cab
SETUP.ISS      Setup.inx      WinX64            data1.cab      ikernel.ex_
KV_BSD# ls WinXP2K
BLKWGU.inf      BLKWGU.sys      blkwgu.cat
KV_BSD#
0
 

Author Comment

by:kayvey
ID: 22969867
above I showed the /root/wi_driver directory that I created and cp-ed files from the "/mnt/drive"
which is where I mount my CD's.  
0
 

Author Comment

by:kayvey
ID: 22969871
the README file I created shows the end of running that ndisgen utility.
0
 

Author Comment

by:kayvey
ID: 22969876
I created two *.ko files, one with the *.cat file and one without the *.cat file.  They both caused reboot.
0
 

Author Comment

by:kayvey
ID: 22969877
KV_BSD# ls WinXP2K
BLKWGU.inf      BLKWGU.sys      blkwgu.cat
KV_BSD# cd /var
KV_BSD# ls
.snap            backups            db            heimdal            mail            run            yp
account            cache            empty            lib            msgs            rwho
at            crash            games            log            named            spool
audit            cron            gdm            lost+found      preserve      tmp
KV_BSD# cd crash
KV_BSD# ls
bounds            info.1            minfree            vmcore.1
info.0            info.2            vmcore.0      vmcore.2
KV_BSD#
0
 
LVL 62

Assisted Solution

by:gheist
gheist earned 2000 total points
ID: 22972239
port 2 addr 2: high speed, power 500 mA, config 1, Belkin Wireless G USB Adapter(0x705e), vendor 0x050d(0x050d), rev 2.

PCI ID 705e us not in pcidevs file for 7.0 or 6.3, it is brand new card (and for instance Device ID is not present in OpenBSD and NetBSD too)

There are five versions of adapter - each with different set of drivers and different chipsets:
http://www.belkin.com/support/article/?lid=en&pid=F5D7050&aid=5381&scid=0

Please select which one you have so I can look inside windows .inf file and try to help in adding respective USB ID to likely driver.

Our success may not come so easy as the card may have unusable radio circuitry inside.

When you do import NDIS driver a security catalog file with .cat makes no difference. You only need one .inf file and one .sys file.
0
 

Author Comment

by:kayvey
ID: 22972437
5xxx I put that in the subject line! {:)  I got notification about a patch from freebsd-net/mobile that is experimental.  Maybe you can help me apply it, but I can't do that until 8am tommorrow GMT at the earliest (that is midnight tonight PST my time.  In Berkeley, can't get internet connection on FreeBSD because only wireless net is available)

16/08, Kayven Riese <kayvey@gmail.com> wrote:

> I'm sorry for the double cc:, but also, since you are saying this is
> experimental, it wouldn't be on 7.1? Do you have any idea when 7.1 is
> going to be RELENG?


USB support in ndis did not yet hit CURRENT, first usb2 need to be settled down
for some time.

Speaking about RELENG 7.1 dunno, but it will be when it is ready ...

- Show quoted text -

> On Sun, Nov 16, 2008 at 9:32 AM, Kayven Riese <kayvey@gmail.com> wrote:
>
>> Are you saying I could apply this patch if I'm willing to take a chance?
>> I
>> don't suppose you would have the direct link?
>>
>>
>> On Sun, Nov 16, 2008 at 3:35 AM, Paul B. Mahol <onemda@gmail.com> wrote:
>>
>>> On 11/16/08, Kayven Riese <kayvey@gmail.com> wrote:
>>> > I just purchased a wireless connection device that connects to my ASUS
>>> > M6800N laptop dual
>>> > booting Vista and
>>> >
>>> > KV_BSD# uname -a
>>> > FreeBSD KV_BSD 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52
>>> UTC
>>> > 2008     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
>>> > KV_BSD#
>>> >
>>> > via USB.
>>> >
>>> > While booting on Vista, connection was fine.  I investigated my man
>>> pages
>>> > for Belkin modles in
>>> > the interfaces:
>>> > V_BSD# man an | grep Belkin
>>> > KV_BSD# man awi | grep Belkin
>>> > KV_BSD# man ipw | grep Belkin
>>> > KV_BSD# set -o vi
>>> > KV_BSD# man iwi | grep Belkin
>>> > KV_BSD# man ral | grep Belkin
>>> >      Belkin F5D7000 v3            RT2560     PCI
>>> >      Belkin F5D7010 v2            RT2560     CardBus
>>> > KV_BSD# man rum | grep Belkin
>>> >      Belkin F5D7050 ver 3         USB
>>> >      Belkin F5D9050 ver 3         USB
>>> > KV_BSD# man ural | grep Belkin
>>> >      Belkin F5D7050 v2000         USB
>>> > KV_BSD# man wi | grep Belkin
>>> >      Belkin F5D6000 (a rebadged WL11000P)
>>> > KV_BSD# man zyd | grep Belkin
>>> >            Belkin F5D7050 v.4000
>>> > KV_BSD#
>>> >
>>> > and found some websites that made me compare a serial number that I
>>> > correlated to some
>>> > information on the Belkin website and came to the conclusion that my
>>> device
>>> > is a newer
>>> > version than appears in the above list because of this information:
>>> >
>>> > K7SF5D7050E corresponds to version 5xxx
>>> >
>>> > That serial number is written on the device.
>>> >
>>> > There were no unfamiliar results of ifconfig:
>>> >
>>> >
>>> >
>>> > KV_BSD# ifconfig
>>> > bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>>> 1500
>>> >     options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
>>> >     ether 00:11:d8:22:c9:91
>>> >     inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
>>> >     media: Ethernet autoselect (100baseTX <full-duplex>)
>>> >     status: active
>>> > fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>> >     options=8<VLAN_MTU>
>>> >     ether 02:e0:18:26:4c:e9
>>> >     ch 1 dma -1
>>> > fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>> >     lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
>>> > plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0
>>> mtu
>>> > 1500
>>> > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>> >     inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
>>> >     inet6 ::1 prefixlen 128
>>> >     inet 127.0.0.1 netmask 0xff000000
>>> > KV_BSD#
>>> >
>>> > I attempted to use the ndisgen utility with the driver disk mounted on
>>> > "/mnt/drive"
>>> >
>>>
>>> Currently ndis on freebsd doesnt support usb cards at all.
>>> There is patch available for CURRENT that is considered experimental and
>>> make possible to use ndis on FreeBSD with usb cards.
>>>
>>> > KV_BSD# pwd
>>> > /mnt/drive
>>> > KV_BSD# ls
>>> > AUTORUN.INF        Belkin.ico        Installer.exe        UserManual
>>> > Acrobat Reader        InstallationFiles    Installer.ini
>>> > KV_BSD# cd InstallationFiles
>>> > KV_BSD# ls
>>> > Belkin.bmp    Setup.exe    VistaX64    WinXP2K        data1.hdr
>>> > layout.bin
>>> > ISSetup.dll    Setup.ini    VistaX86    _Setup.dll    data2.cab
>>> > SETUP.ISS    Setup.inx    WinX64        data1.cab    ikernel.ex_
>>> > KV_BSD# ls WinXP2K
>>> > BLKWGU.inf    BLKWGU.sys    blkwgu.cat
>>> >
>>> > twice, once using the BLKWGU.inf and BLKWGU.sys files from the WinXP2K
>>> > directory and again
>>> > adding the blkwgu.cat file using the menu that ndisgen gives, and both
>>> times
>>> > it terminated
>>> > with success:
>>> >
>>> >
>>>  ==================================================================
>>> >         ------------------ Windows(r) driver converter
>>> -------------------
>>> >
>>> ==================================================================
>>> >
>>> >                         Kernel module generation
>>> >
>>> >
>>> >         The script will now try to generate the kernel driver module.
>>> >         This is the last step. Once this module is generated, you
>>> > should
>>> >         be able to load it just like any other FreeBSD driver module.
>>> >
>>> >         Press enter to compile the stub module and generate the driver
>>> >         module now:
>>> >
>>> >         Generating Makefile... done.
>>> >         Building kernel module... done.
>>> >         Cleaning up... done.
>>> >
>>> >         The file BLKWGU_sys.ko has been successfully generated.
>>> >         You can kldload this module to get started.
>>> >
>>> >         Press return to exit.
>>> >
>>> > When I tried to use the kldload command in both cases, the system
>>> rebooted.
>>> >
>>> > I messed around with /boot/loader.conf, including many of the
>>> > interfaces
>>> > that were
>>> > noted above "man if | grep Belkin," and right now this is what it looks
>>> > like:
>>> > KV_BSD# cat /boot/loader.conf
>>> > hint.ichss.0.disabled="1"
>>> > W32DRIVER_load="YES"
>>> > wlan_load="YES"
>>> > firmware_load="YES"
>>> > if_zyd_load="YES"
>>> > wlan_scan_ap_load="YES"
>>> > wlan_scan_sta_load="YES"
>>> > wlan_wep_load="YES"
>>> > wlan_ccmp_load="YES"
>>> > wlan_tkip_load="YES"
>>> >
>>> > I note that the device is showing up in dmesg
>>> >
>>> > KV_BSD# dmesg | grep Belkin
>>> > ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev
>>> > 2.00/2.00, addr 2> on uhub3
>>> > ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev
>>> > 2.00/2.00, addr 2> on uhub3
>>> > ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev
>>> > 2.00/2.00, addr 2> on uhub3
>>> > ugen0: <vendor 0x050d Belkin Wireless G USB Adapter, class 0/0, rev
>>> > 2.00/2.00, addr 2> on uhub3
>>> > KV_BSD#
>>> >
>>> >
>>> > some other info..
>>> >
>>> >
>>> > KV_BSD# pciconf -lv
>>> > hostb0@pci0:0:0:0:      class=0x060000 card=0x186a1043 chip=0x33408086
>>> > rev=0x21 hdr=0x00
>>> >     vendor     = 'Intel Cor
>>> >                                                      .
>>> >
>>> >                                                      .
>>> >
>>> > none1@pci0:0:31:6:    class=0x070300 card=0x18261043 chip=0x24c68086
>>> > rev=0x03 hdr=0x00
>>> >     vendor     = 'Intel Corporation'
>>> >     device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem
>>> > Controller'
>>> >     class      = simple comms
>>> >     subclass   = generic modem
>>> > vgapci0@pci0:1:0:0:    class=0x030000 card=0x17721043 chip=0x4e501002
>>> > rev=0x00 hdr=0x00
>>> >     vendor     = 'ATI Technologies Inc'
>>> >     device     = 'Mobility Radeon 9700 (M10 NP) (RV350)'
>>> >     class      = display
>>> >     subclass   = VGA
>>> > bge0@pci0:2:0:0:    class=0x020000 card=0x17351043 chip=0x169c14e4
>>> rev=0x03
>>> > hdr=0x00
>>> >     vendor     = 'Broadcom Corporation'
>>> >     device     = 'BCM5788 Broadcom NetLink (TM) Gigabit Ethernet'
>>> >     class      = network
>>> >     subclass   = ethernet
>>> > cbb0@pci0:2:1:0:    class=0x060700 card=0x18641043 chip=0x04761180
>>> rev=0xac
>>> > hdr=0x02
>>> >     vendor     = 'Ricoh Company, Ltd.'
>>> >     device     = 'unknown Ricoh R/RL/5C476(II)'
>>> >     class      = bridge
>>> >     subclass   = PCI-CardBus
>>> > cbb1@pci0:2:1:1:    class=0x060700 card=0x18641043 chip=0x04761180
>>> rev=0xac
>>> > hdr=0x02
>>> >     vendor     = 'Ricoh Company, Ltd.'
>>> >     device     = 'unknown Ricoh R/RL/5C476(II)'
>>> >     class      = bridge
>>> >     subclass   = PCI-CardBus
>>> > fwohci0@pci0:2:1:2:    class=0x0c0010 card=0x18671043 chip=0x05521180
>>> > rev=0x04 hdr=0x00
>>> >     vendor     = 'Ricoh Company, Ltd.'
>>> >     device     = 'RL5c552 IEEE-1394 Controller'
>>> >     class      = serial bus
>>> >     subclass   = FireWire
>>> > none2@pci0:2:2:0:    class=0x028000 card=0x10008086 chip=0x42238086
>>> rev=0x05
>>> > hdr=0x00
>>> >     vendor     = 'Intel Corporation'
>>> >     device     = '2915ABG Intel (R) PRO/Wireless 2200BG Network
>>> Connection,
>>> > (R) PRO/Wireless 2915ABG Network Connection'
>>> >     class      = network
>>> > KV_BSD# usbdevs -v
>>> > Controller /dev/usb0:
>>> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
>>> > Intel(0x0000), rev 1.00
>>> >  port 1 powered
>>> >  port 2 powered
>>> > Controller /dev/usb1:
>>> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
>>> > Intel(0x0000), rev 1.00
>>> >  port 1 addr 2: low speed, power 100 mA, config 1, USB Optical
>>> > Mouse(0xc019), Logitech(0x046d), rev 43.01
>>> >  port 2 powered
>>> > Controller /dev/usb2:
>>> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
>>> > Intel(0x0000), rev 1.00
>>> >  port 1 powered
>>> >  port 2 powered
>>> > Controller /dev/usb3:
>>> > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
>>> > Intel(0x0000), rev 1.00
>>> >  port 1 powered
>>> >  port 2 addr 2: high speed, power 500 mA, config 1, Belkin Wireless G
>>> USB
>>> > Adapter(0x705e), vendor 0x050d(0x050d), rev 2.00
>>> >  port 3 powered
>>> >  port 4 powered
>>> >  port 5 powered
>>> >  port 6 powered
>>> > KV_BSD# exit
>>> >
>>> > Thanks to anyone in advance who gives me the time of day.  I looked at
>>> some
>>> > of the archives and felt these two
>>> > lists seemed appropriate.  Forgive me if I misused the lists.
>>> >
>>> >
>>> > *----------------------------------------------------------*
>>> >  Kayven Riese, BSCS,
>>> >                      MS  (Physiology and Biophysics)
>>> >  (415) 902 5513 cellular
>>> >  http://kayve.net
>>> >  Webmaster http://ChessYoga.org
>>> > *----------------------------------------------------------*
>>> > _______________________________________________
>>> > freebsd-mobile@freebsd.org mailing list
>>> > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
>>> > To unsubscribe, send any mail to "
>>> freebsd-mobile-unsubscribe@freebsd.org"
>>> >
>>>
>>
>>
>>
>> --
>>
>> *----------------------------------------------------------*
>>  Kayven Riese, BSCS,
>>                      MS  (Physiology and Biophysics)
>>  (415) 902 5513 cellular
>>  http://kayve.net
>>  Webmaster http://ChessYoga.org
>> *----------------------------------------------------------*
>>
>>
>>
>>
>
>
> --
>
> *----------------------------------------------------------*
>  Kayven Riese, BSCS,
>                      MS  (Physiology and Biophysics)
>  (415) 902 5513 cellular
http://kayve.net
>  Webmaster http://ChessYoga.org
> *----------------------------------------------------------*
>


Here is original message (available on archives):

On 7/24/08, Weongyo Jeong <weon...@gmail.com> wrote:

 Hello All,

 It looks that NDIS USB support works for some USB wireless drivers so
I'd like to call for tests to everyone who interested in NDIS for
FreeBSD. I have 7 USB wireless adapters and with current NDIS USB
support
 4 of 7 adapters are supported. The detail is as follows:

 Working: U-Khan UW-2054i (Marvell Libertas chipset) Netgear WG111v2
(Intersil/Prism chipset) - supported by upgt(4) EFM-IPTIME G054U2
(Ralink RT2573) - supported by rum(4) ZCOM XM-142 (Intersil/Prism
chipset,
 another revision)

 Not working: Unicorn WL-54G (ZyDAS zd1211b chipset) - supported by
zyd(4) Attaching is working sucessfully and LED works fine but it's
not UPed. Zyxel G-200v2 (ZyDAS zd1211 chipset) - supported by zyd(4)
The
 sympotom is same with Unicorn WL-54G. SMCWUSBT-G-CA EZ 108Mbps
(Atheros chipset) This NDIS driver uses some functions which aren't
supported by current NDIS implementation. So I can't test it now.

 The patch for HEAD can be found at:

 http://people.freebsd.org/~weongyo/patch_ndisusb_20080724.diff

 When you try to test this patch, you should make sure that ndiscvt(8)
is updated. Some instructions like below could be helpful:

 # cd /usr/src # patch -p0 < ~/patch_ndisusb_20080724.diff # cd
usr.sbin/ndiscvt # make && make install # cd ~/ # ndisgen ABC.inf
ABC.sys # cd /usr/src/sys/modules/ndis # make # kldload ./ndis.ko # cd
 /usr/src/sys/modules/if_ndis # make # kldload ./if_ndis.ko # kldload
~/ABC_sys.ko

 It seems that the current status of NDIS USB support is beta status
so I'm not sure I've implemented all features yet that it needs more
debugging and stability. I don't have all H/Ws for testing! :) Please
 tell me if you were successful or you failed though it looks it's not
easy to debug NDIS .sys binary using disassembler.

 Any help and comments are welcome
0
 

Author Comment

by:kayvey
ID: 22973008
The patching failed on the make in /usr/src/sys/modules/ndis
0
 

Author Comment

by:kayvey
ID: 22973260

Patching file sys/compat/ndis/subr_usbd.c using Plan A...
Hunk #1 succeeded at 45.
Hunk #2 succeeded at 70.
Hunk #3 succeeded at 135.
Hunk #4 succeeded at 170.
Hunk #5 succeeded at 1134.
Hunk #6 succeeded at 1188.
Hunk #7 succeeded at 1211.
done
#                                                                              

KV_BSD# ccd usr/sbin/ndiscvt

cd: no such file or directory: usr/sbin/ndiscvt
#                                                                              

KV_BSD# cd usr/sbin/ndiscvt/usr/sbin/ndiscvt

cd: not a directory: /usr/sbin/ndiscvt
#                                                                              

KV_BSD# cd /usr/sbin/ndiscvt .sbin/ndiscvt

cd: no such file or directory: /usr.sbin/ndiscvt
#                                                                              

KV_BSD# ffind / -name ndiscf c vt

/usr/sbin/ndiscvt
/usr/src/usr.sbin/ndiscvt
cczsh: terminated  find / -name ndiscvt
#                                          


#                                                                              

KV_BSD# nndisgen BLKWGU.inf BLKWGU.sys 

      ==================================================================
      ------------------ Windows(r) driver converter -------------------
      ==================================================================



      The file BLKWGU_sys.ko has been successfully generated.
      You can kldload this module to get started.

      Press return to exit.


#                                                                              

KV_BSD# lls

BLKWGU.inf                  blkwgu.cat
BLKWGU.sys                  blkwgu.cat.ko
BLKWGU_sys.ko                  patch_ndisusb_20080724.diff
README                        probes
applyBelkinPatch.txt            triedPatch
#                                                                              

KV_BSD# ppushd /sr/   usr/src/sys/modules/ndis

/usr/src/sys/modules/ndis ~/wi_driver


#                                                                              

KV_BSD# mmake

Warning: Object directory not changed from original /usr/src/sys/modules/ndis
@ -> /usr/src/sys
machine -> /usr/src/sys/i386/include
awk -f @/tools/makeobjops.awk @/kern/device_if.m -h
awk -f @/tools/makeobjops.awk @/kern/bus_if.m -h
awk -f @/tools/makeobjops.awk @/dev/pci/pci_if.m -h
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -p
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -q
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -h
:> opt_usb.h
awk -f @/tools/usbdevs2h.awk @/dev/usb/usbdevs -h
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/ndis/../../compat/ndis/subr_pe.c
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/ndis/../../compat/ndis/subr_ndis.c
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/ndis/../../compat/ndis/subr_hal.c
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/ndis/../../compat/ndis/subr_ntoskrnl.c
/usr/src/sys/modules/ndis/../../compat/ndis/subr_ntoskrnl.c:4200: warning: function declaration isn't a prototype
/usr/src/sys/modules/ndis/../../compat/ndis/subr_ntoskrnl.c:4238: warning: function declaration isn't a prototype
/usr/src/sys/modules/ndis/../../compat/ndis/subr_ntoskrnl.c:4203: warning: 'KeDelayExecutionThread' defined but not used
/usr/src/sys/modules/ndis/../../compat/ndis/subr_ntoskrnl.c:4218: warning: 'KeQueryInterruptTime' defined but not used
/usr/src/sys/modules/ndis/../../compat/ndis/subr_ntoskrnl.c:4231: warning: 'KeGetCurrentThread' defined but not used
/usr/src/sys/modules/ndis/../../compat/ndis/subr_ntoskrnl.c:4240: warning: 'KeSetPriorityThread' defined but not used
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/ndis/../../compat/ndis/kern_ndis.c
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/ndis/../../compat/ndis/kern_windrv.c
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c: In function 'usbd_irpcancel_iin_cb':
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:612: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:612: error: 'NDISUSB_ENDPT_IIN' undeclared (first use in this function)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:612: error: (Each undeclared identifier is reported only once
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:612: error: for each function it appears in.)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c: In function 'usbd_func_bulkintr_iin':
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:660: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:660: error: 'NDISUSB_ENDPT_IIN' undeclared (first use in this function)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:692: error: 'struct ndis_softc' has no member named 'ndisusb_iin_buf'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:697: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c: In function 'usbd_init_ndispipe':
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:747: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:747: error: 'NDISUSB_ENDPT_BIN' undeclared (first use in this function)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:752: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:757: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:757: error: 'NDISUSB_ENDPT_BOUT' undeclared (first use in this function)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:761: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:769: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:769: error: 'NDISUSB_ENDPT_IOUT' undeclared (first use in this function)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:773: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c: In function 'usbd_func_bulkintr':
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1006: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1006: error: 'NDISUSB_ENDPT_BIN' undeclared (first use in this function)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1013: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1013: error: 'NDISUSB_ENDPT_BOUT' undeclared (first use in this function)
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1025: error: 'struct ndis_softc' has no member named 'ndisusb_ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1025: error: 'NDISUSB_ENDPT_IOUT' undeclared (first use in this function)
*** Error code 1

Stop in /usr/src/sys/modules/ndis.
#                                                                              

KV_BSD# lls

@                  kern_windrv.o            subr_ntoskrnl.o
Makefile            machine                  subr_pe.o
Makefile.orig            opt_usb.h            usbdevs.h
bus_if.h            pci_if.h            vnode_if.h
device_if.h            subr_hal.o            vnode_if_newproto.h
kern_ndis.o            subr_ndis.o            vnode_if_typedef.h
#                                                                              

KV_BSD# ppopd

~/wi_driver
#                                                                              

KV_BSD# eexit


Script done on Sun Nov 16 18:06:24 2008

0
 

Author Comment

by:kayvey
ID: 22973269
This didn't break because I did it in a typescript, did it?

Sorry for the formatting.  Right now, I have internet on Microsoft, but no internet on
FreeBSD.. that is the nature of the beast we are tackling.  Later, I may have internet
at home on FreeBSD. I can mount my Vista on FreeBSD using buses, and I transfered
my files from FreeBSD to Vista using my friend's flash drive.

I don't have a flash drive.
0
 

Author Comment

by:kayvey
ID: 22973279
This is a typescript file
0
 

Author Comment

by:kayvey
ID: 22973286
That pasting was really screwed up.  {:( I'm sorry.  I followed the directions and the make in
this directory:

    usr/src/sys/modules/ndis

is responsible for the "error 1"  that you can barely make out.
0
 

Author Comment

by:kayvey
ID: 22973419

patch for HEAD can be found at:

 http://people.freebsd.org/~weongyo/patch_ndisusb_20080724.diff

 When you try to test this patch, you should make sure that ndiscvt(8)
is updated. Some instructions like below could be helpful:

 # cd /usr/src # patch -p0 < ~/patch_ndisusb_20080724.diff # cd
usr.sbin/ndiscvt # make && make install # cd ~/ # ndisgen ABC.inf
ABC.sys # cd /usr/src/sys/modules/ndis # make # kldload ./ndis.ko # cd
 /usr/src/sys/modules/if_ndis # make

ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1025: error: 'NDISUSB_ENDPT_IOUT' undeclared (first use in this function)
*** Error code 1
0
 

Author Comment

by:kayvey
ID: 22973423
I have a 5xxx device.  Wasn't mentioned in any of my man | greps
0
 
LVL 62

Expert Comment

by:gheist
ID: 22981188
It will have couple of days for me to get back to computer and analyse everything you said. I hope somebody will come around by this time helping here.
0
 

Author Comment

by:kayvey
ID: 22981367
I tried to sum it up in the more recent posts.. sorry for the mess.

1) In the subject the answer to your question is 5xxx  It was sort of the nature of the
  question that the model was not supported by the any existing interfaces that I
explored by man | grep

2) I was told there was an "experimental patch for CURRENT" and I followed the instructions.

patch for HEAD can be found at:

 http://people.freebsd.org/~weongyo/patch_ndisusb_20080724.diff

 When you try to test this patch, you should make sure that ndiscvt(8)
is updated. Some instructions like below could be helpful:

 # cd /usr/src # patch -p0 < ~/patch_ndisusb_20080724.diff # cd
usr.sbin/ndiscvt # make && make install # cd ~/ # ndisgen ABC.inf
ABC.sys # cd /usr/src/sys/modules/ndis # make # kldload ./ndis.ko # cd
 /usr/src/sys/modules/if_ndis # make

ep'
/usr/src/sys/modules/ndis/../../compat/ndis/subr_usbd.c:1025: error: 'NDISUSB_ENDPT_IOUT' undeclared (first use in this function)
*** Error code 1

They failed, however, as can be seen above.
0
 

Author Comment

by:kayvey
ID: 22981400
awww.. my points are no good for you? {:}
0
 

Author Comment

by:kayvey
ID: 22983262
I have a feeling you may tell me to buy a new device.  I would like to learn to write a driver, but I don't have time.  I think I will save that project for later.  If I need to buy a new device, I am about to provide
 a long list of possibilities.  Don't worry too much if you don't want to look at them all.  I will probably be figuring out which one might be compatible by man | grep when I am booting on FreeBSD again.  I think I will eventually be giving you points for this question one way or another.

Here is that big long list you will hate more for:

NETGEAR - Wireless USB 2.0 Adapter
Model: WG111 | SKU: 6825233
        $44.99


Linksys - Ultra RangePlus Dual-Band Wireless-N USB 2.0 Adapter
Model: WUSB600N | SKU: 8682437
         $69.99

Linksys - 802.11g Compact Wireless USB Adapter
Model: WUSB54GC | SKU: 7667009
         $49.99

D-Link - Wireless-N USB 2.0 Adapter
Model: DWA-130 | SKU: 8305602
         $62.99

Dynex® - Wireless-G USB 2.0 Network Adapter
Model: DX-BUSB | SKU: 8544989
Delivers Wireless-G speeds up to
         $34.99


Hawking Technology - Wireless-G USB 2.0 Network Adapter
Model: HWUG1A | SKU: 8454549
        $34.99

D-Link - Xtreme N Dual-Band Wireless-N USB 2.0 Adapter
Model: DWA-160 | SKU: 8858729
        $71.99

Hawking Technology - Wireless-G USB 2.0 Network Adapter
Model: HWUG1 | SKU: 8454638
        $49.99

Linksys - RangePlus Enhanced Wireless-G Network USB 2.0 Adapter
Model: WUSB100 | SKU: 8682286
Complies with enhanced 802.11g standards; backward compatible with 802.11b; MIMO technology
        $69.99

NETGEAR - RangeMax Dual-Band Wireless-N USB Adapter
Model: WNDA3100-100NAS | SKU: 8669942
        $79.99

D-Link - 802.11g RangeBooster G Wireless USB Network Adapter
Model: WUA-2340 | SKU: 7650393
        $44.99

Dynex® - Enhanced Wireless-G USB 2.0 Network Adapter
Model: DX-EBUSB | SKU: 8545041
        $44.99

NETGEAR - RangeMax 802.11g Wireless USB 2.0 Adapter
Model: WPN111 | SKU: 7061797
Data transfer rate up to 108 Mbps via USB 2.0; works with 802.11b, 802.11g and Super G devices; weighs 1.1 oz.
        $59.99

NETGEAR - Rangemax NEXT Wireless-N USB 2.0 Adapter
Model: WN111-100NAS | SKU: 8564378
         $79.99

D-Link - RangeBooster N Wireless-N USB 2.0 Adapter
Model: DWA-140 | SKU: 8674204
         $71.99

Dynex® - Wireless-N USB 2.0 Adapter
Model: DX-NUSB | SKU: 9010205
Delivers Wireless-N speeds up to 270 Mbps; up to 1000' range; WEP encryption
         $59.99
0
 
LVL 62

Expert Comment

by:gheist
ID: 22985062
There is nothing wrong with You. I was wrong not understanding v5000 is v5xxx, not because of my english, but because of ignorance.  I am downloading the driver .exe from internet and will look into driver files which one should do best or which preinstalled replacements are most likely to work.

0
 
LVL 62

Assisted Solution

by:gheist
gheist earned 2000 total points
ID: 22985977
[BELKIN]
%RTL8187B.DeviceDesc% = RTL8187B.ndi, USB\VID_050D&PID_705E&REV_0200

So my further observations
1) In Linux it is non-free rtl8187 module
2) this one http://www.openbsd.org/cgi-bin/man.cgi?query=rtw&sektion=4&apropos=0&manpath=OpenBSD+Current&arch=i386
supports 8185 chip. I am not sure if they are similar.
3) Try generic drivers: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true

If none works assume it does not work. So far I build linux NDIS driver from both BELKIN and Realtek 2kxp drivers without any problem, but without having actual hardware I cannot check.
Can you kldload drivers with hardware unplugged and check if ir crashes on attaching.
0
 

Author Comment

by:kayvey
ID: 22992165
I am sure I am being stupid but

KV_BSD% man rtw
No manual entry for rtw
KV_BSD%
KV_BSD% uname -a
FreeBSD KV_BSD 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
KV_BSD%

I can probably somehow get rtw for FreeBSD, but I am not sure how that goes.  I guess I can ask the
google, but I might be too tired just now.
linux-compat.png
green-grass.png
0
 

Author Comment

by:kayvey
ID: 22992176
dumb idea

64 bytes from 68.180.206.184: icmp_seq=21 ttl=56 time=10.198 ms
64 bytes from 68.180.206.184: icmp_seq=22 ttl=56 time=9.431 ms
64 bytes from 68.180.206.184: icmp_seq=23 ttl=56 time=9.850 ms
64 bytes from 68.180.206.184: icmp_seq=24 ttl=56 time=10.555 ms
64 bytes from 68.180.206.184: icmp_seq=25 ttl=56 time=10.254 ms
zsh: terminated  ping yahoo.com
KV_BSD# cd /usr/ports
KV_BSD# find . -name rtw
KV_BSD#
0
 
LVL 62

Assisted Solution

by:gheist
gheist earned 2000 total points
ID: 22992739
1) Card will work in Linux with extra driver, that does not help FreeBSD
2) rtw driver contained in OpenBSD may work after lot of work in OpenBSD, driver is not present in FreeBSD even if yo get it working in OpenBSD
3) Non-Belkin driver may work with FreeBSD NDIS loader (or crash like Belkin driver)
4) Can you load one of ndis driver when hardware is not plugged in and plug your device after t find out where it crashed?
0
 

Author Comment

by:kayvey
ID: 23001392
Now I don't have to mount and remount and reboot and flash drive.. so everything looks more pretty

Stop in /usr/src/sys/modules/if_ndis.
KV_BSD# ls                            
@               Makefile        bus_if.h        card_if.h       device_if.h     machine         opt_usb.h       pccarddevs.h    pci_if.h        usbdevs.h
KV_BSD# script makesplat
Script started, output file is makesplat
KV_BSD# make
Warning: Object directory not changed from original /usr/src/sys/modules/if_ndis
cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99 -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-common  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c /usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c: In function 'ndis_txeof':
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:1553: warning: implicit declaration of function 'NDISMTX_LOCK'
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:1553: warning: nested extern declaration of 'NDISMTX_LOCK'
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:1565: warning: implicit declaration of function 'NDISMTX_UNLOCK'
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:1565: warning: nested extern declaration of 'NDISMTX_UNLOCK'
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c: In function 'ndis_stop':
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:3469: error: 'struct ndis_softc' has no member named 'ndisusb_status'
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:3469: error: 'NDISUSB_STATUS_DETACH' undeclared (first use in this function)
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:3469: error: (Each undeclared identifier is reported only once
/usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:3469: error: for each function it appears in.)
*** Error code 1

Stop in /usr/src/sys/modules/if_ndis.
KV_BSD# exit

Script done, output file is makesplat
KV_BSD#



is that what you meant? No Belkin hardware in machine right now...

wait.. I should load something..
0
 

Author Comment

by:kayvey
ID: 23001406
KV_BSD# ls -l
total 250
lrwxr-xr-x  1 root  wheel      12 Nov 19 21:27 @ -> /usr/src/sys
-rw-r--r--  1 root  wheel     308 Sep 27  2005 Makefile
-rw-r--r--  1 root  wheel   26525 Nov 19 21:27 bus_if.h
-rw-r--r--  1 root  wheel    7729 Nov 19 21:27 card_if.h
-rw-r--r--  1 root  wheel   10913 Nov 19 21:27 device_if.h
lrwxr-xr-x  1 root  wheel      25 Nov 19 21:27 machine -> /usr/src/sys/i386/include
-rw-r--r--  1 root  wheel    2372 Nov 19 21:28 makesplat
-rw-r--r--  1 root  wheel       0 Nov 19 21:27 opt_usb.h
-rw-r--r--  1 root  wheel   74775 Nov 19 21:27 pccarddevs.h
-rw-r--r--  1 root  wheel    9109 Nov 19 21:27 pci_if.h
-rw-r--r--  1 root  wheel  115564 Nov 19 21:27 usbdevs.h
KV_BSD# ls /home/kayve/*gz
/home/kayve/rtl8185_linux_26[1].1027.0823.2007.tar.gz
KV_BSD# ls /home/kayve/*gz                                          
/home/kayve/rtl8185_linux_26[1].1027.0823.2007.tar.gz
KV_BSD# pwd            
/usr/src/sys/modules/if_ndis
KV_BSD# mv /home/kayve/rtl8185_linux_26\[1\].1027.0823.2007.tar.gz .
KV_BSD# gunzip rtl8185_linux_26\[1\].1027.0823.2007.tar.gz
KV_BSD# tar vxf rtl8185_linux_26\[1\].1027.0823.2007.tar
x rtl8185_linux_26.1027.0823.2007/
x rtl8185_linux_26.1027.0823.2007/makedrv
x rtl8185_linux_26.1027.0823.2007/ifcfg-wlan0
x rtl8185_linux_26.1027.0823.2007/stack.tar.gz
x rtl8185_linux_26.1027.0823.2007/rtl8185.tar.gz
x rtl8185_linux_26.1027.0823.2007/readme
x rtl8185_linux_26.1027.0823.2007/wlan0down
x rtl8185_linux_26.1027.0823.2007/release_note
x rtl8185_linux_26.1027.0823.2007/wlan0up
x rtl8185_linux_26.1027.0823.2007/wlan0dhcp
x rtl8185_linux_26.1027.0823.2007/wpa_supplicant-0.4.9.tar.gz
KV_BSD#
0
 

Author Comment

by:kayvey
ID: 23001427

KV_BSD# ls -l
total 988
lrwxr-xr-x  1 root   wheel      12 Nov 19 21:27 @ -> /usr/src/sys
-rw-r--r--  1 root   wheel     308 Sep 27  2005 Makefile
-rw-r--r--  1 root   wheel   26525 Nov 19 21:27 bus_if.h
-rw-r--r--  1 root   wheel    7729 Nov 19 21:27 card_if.h
-rw-r--r--  1 root   wheel   10913 Nov 19 21:27 device_if.h
lrwxr-xr-x  1 root   wheel      25 Nov 19 21:27 machine -> /usr/src/sys/i386/include
-rw-r--r--  1 root   wheel    2372 Nov 19 21:28 makesplat
-rw-r--r--  1 root   wheel       0 Nov 19 21:27 opt_usb.h
-rw-r--r--  1 root   wheel   74775 Nov 19 21:27 pccarddevs.h
-rw-r--r--  1 root   wheel    9109 Nov 19 21:27 pci_if.h
drwx------  2 500    513       512 Aug 22  2007 rtl8185_linux_26.1027.0823.2007
-rw-r--r--  1 kayve  wheel  727040 Nov 18 23:11 rtl8185_linux_26[1].1027.0823.2007.tar
-rw-r--r--  1 root   wheel  115564 Nov 19 21:27 usbdevs.h
KV_BSD# cd rtl8185_linux_26
cd: no such file or directory: rtl8185_linux_26
KV_BSD# ls
@                              opt_usb.h
Makefile                        pccarddevs.h
bus_if.h                        pci_if.h
card_if.h                        rtl8185_linux_26.1027.0823.2007
device_if.h                        rtl8185_linux_26[1].1027.0823.2007.tar
machine                              usbdevs.h
makesplat
KV_BSD# cd rtl8185_linux_26.1027.0823.2007
KV_BSD# ls
ifcfg-wlan0                  stack.tar.gz
makedrv                        wlan0dhcp
readme                        wlan0down
release_note                  wlan0up
rtl8185.tar.gz                  wpa_supplicant-0.4.9.tar.gz
KV_BSD# vi readme

RTL8185 Linux Driver v1027.0823.2007 for linux kernel 2.6

  - Support Client mode for either infrastructure or adhoc mode
  - Support WEP and WPAPSK/WPA2PSK connection

================================================================================
===============
< Component >
The driver is composed of several parts:
    (1)source code
        rtl8185.tar.gz
        stack.tar.gz
        makedrv

    (3)Script to load/unload modules
        wlan0up
        wlan0down

    (4)Script and configuration for DHCP
        wlan0dhcp
        ifcfg-wlan0

    (5)Supplicant source code
        wpa_supplicant-0.4.9.tar.gz
        wpa1.conf




< Installation >
Running the scripts can finish all operations of building up modules from source
 code and start the nic:

        (1)Build up the driver from the source code
                ./makedrv

        (2)Load the driver module to kernel and start up nic
                ./wlan0up
           (if "insmod: error inserting 'r8180.ko': -File exists." met,
                ./wlan0rmv
                ./wlan0down
                ./wlan0up
            should be OK.
           )
        (3)Refer to < Set wireless lan MIBs > to set Wireless LAN specific param
eters.





< Set wireless lan MIBs >
This driver uses Wireless Extension as an interface allowing you to set
Wireless LAN specific parameters.

Current driver supports "iwlist" to show the device status of nic

        iwlist wlan0 [parameters]
        Show available chan and freq    freq / channel
        Show and Scan BSS and IBSS      scan[ning]
        Show supported bit-rate         rate / bit[rate]
For example:

        iwlist wlan0 channel
        iwlist wlan0 scan
        iwlist wlan0 rate
        iwlist wlan0 power


Driver also supports "iwconfig", manipulate driver private ioctls, to set MIBs.

        iwconfig wlan0 [parameters] [val]
where

        Connect to AP by address    ap                          [essid]
        Set the essid, join (I)BSS  essid                       [mac_addr]
        Set operation mode          mode                        {Managed|Ad-hoc}
        Set keys and security mode  key / enc[ryption]          {N|open|restrict
ed|off}


For example:

        iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
        iwconfig wlan0 essid "ap_name"
        iwconfig wlan0 mode Ad-hoc
        iwconfig wlan0 mode essid "name" mode Ad-hoc
        iwconfig wlan0 key 0123456789 [2] open
        iwconfig wlan0 key off
        iwconfig wlan0 key restricted [3] 0123456789

< Getting IP address >
After start up the nic, the network needs to obtain an IP address before transmi
d, or using DHCP.

If using DHCP, setting steps is as below:

        (1)connect to an AP via "iwconfig" settings
                iwconfig wlan0 essid [name]     or
                iwconfig wlan0 ap XX:XX:XX:XX:XX:XX

        (2)run the script which run the dhclient
                ./wlan0dhcp
           or
                dhcpcd wlan0
                (Some network admins require that you use the
                hostname and domainname provided by the DHCP server.
                In that case, use
                dhcpcd -HD wlan0)



< WPAPSK >

        (1)Unpack source code of WPA supplicant:

        (2)Create .config file:
                cp defconfig .config

        (3)Edit .config file, uncomment the following line:
                #CONFIG_DRIVER_IPW=y.

        (4)Build WPA supplicant:
                make
 
        If make error for lack of <include/md5.h>, install the openssl lib:
         1. Install the openssl lib from corresponding installation disc:
            Debian 3.1(libssl-dev), Suse 9.3/10.0/10.1(openssl_devl),
            Gentoo(dev-libs/openssl), etc.
         2. Download the openssl open source package from www.openssl.org, build
        (5)Edit wpa_supplicant.conf to set up SSID and its passphrase.
        For example, the following setting in "wpa1.conf" means SSID to join is
"BufAG54_Ch6"
        and its passphrase is "87654321".

                network={
                        ssid="BufAG54_Ch6"
                        proto=WPA
                        key_mgmt=WPA-PSK
                        pairwise=CCMP TKIP
                        group=CCMP TKIP WEP104 WEP40
                        psk="87654321"
                        priority=2
                }
        Note: 1. proto=WPA for WPA, proto=RSN for WPA2.
              2. If you want to connect an AP which works under WPA2 mixed mode,
 you'd better
                 use Realtek customed wpa_supplicant package.


        (6)Execute WPA supplicant (Assume 8185 and related modules had been load
ed):
                ./wpa_supplicant -D ipw -c wpa1.conf -i wlan0 &
:q
KV_BSD# ls
ifcfg-wlan0                  stack.tar.gz
makedrv                        wlan0dhcp
readme                        wlan0down
release_note                  wlan0up
rtl8185.tar.gz                  wpa_supplicant-0.4.9.tar.gz
KV_BSD# gunzip rtl8185.tar.gz
KV_BSD# tar vxf rtl8185.tar
x rtl8185/
x rtl8185/README.adhoc
x rtl8185/r8180_sa2400.h
x rtl8185/Makefile
x rtl8185/copying
x rtl8185/README.master
x rtl8185/r8180.h
x rtl8185/install
x rtl8185/r8180_max2820.h
x rtl8185/r8180_max2820.c
x rtl8185/r8180_rtl8225.h
x rtl8185/r8180_wx.h
x rtl8185/authors
x rtl8185/tags
x rtl8185/r8180_pm.c
x rtl8185/r8180_hw.h
x rtl8185/r8180_gct.c
x rtl8185/r8180_gct.h
x rtl8185/r8180_rtl8225.c
x rtl8185/readme
x rtl8185/r8180_93cx6.h
x rtl8185/ieee80211.h
x rtl8185/license
x rtl8185/r8180_pm.h
x rtl8185/changes
x rtl8185/r8180_rtl8225z2.c
x rtl8185/r8180_wx.c
x rtl8185/r8180_rtl8255.c
x rtl8185/r8180_93cx6.c
x rtl8185/r8180_sa2400.c
x rtl8185/r8180_core.c
x rtl8185/r8180_rtl8255.h
x rtl8185/ieee80211_crypt.h
KV_BSD# ls
ifcfg-wlan0                  stack.tar.gz
makedrv                        wlan0dhcp
readme                        wlan0down
release_note                  wlan0up
rtl8185                        wpa_supplicant-0.4.9.tar.gz
rtl8185.tar
KV_BSD# cd rtl8185
KV_BSD# ls
Makefile            r8180_93cx6.c            r8180_rtl8225.h
README.adhoc            r8180_93cx6.h            r8180_rtl8225z2.c
README.master            r8180_core.c            r8180_rtl8255.c
authors                  r8180_gct.c            r8180_rtl8255.h
changes                  r8180_gct.h            r8180_sa2400.c
copying                  r8180_hw.h            r8180_sa2400.h
ieee80211.h            r8180_max2820.c            r8180_wx.c
ieee80211_crypt.h      r8180_max2820.h            r8180_wx.h
install                  r8180_pm.c            readme
license                  r8180_pm.h            tags
r8180.h                  r8180_rtl8225.c
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23001434
rv
zsh: ./makedrv: bad interpreter: /bin/bash: no such file or directory
KV_BSD# which bash
/usr/local/bin/bash
KV_BSD# vi makedrv

#!/usr/local/bin/bash

tar -zvxf stack.tar.gz
tar -zvxf rtl8185.tar.gz
cd ieee80211
make clean
make
cd ../rtl8185
make clean
make
cd ../
~
~
~
~
~
~
~
~
~
~
~
~
makedrv: 11 lines, 137 characters.
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23001443
heh {:)  you were right he he he he  {:)

x ./ieee80211/ieee80211_crypt.c
tar: Error opening archive: Failed to open 'rtl8185.tar.gz': No such file or directory
rm -f *.mod.c *.mod *.o .*.cmd *.ko
rm -rf /usr/src/sys/modules/if_ndis/rtl8185_linux_26.1027.0823.2007/ieee80211/tmp
make -C /lib/modules//build M=/usr/src/sys/modules/if_ndis/rtl8185_linux_26.1027.0823.2007/ieee80211 CC=gcc modules
make: chdir /lib/modules//build: No such file or directory
*** Error code 1

Stop in /usr/src/sys/modules/if_ndis/rtl8185_linux_26.1027.0823.2007/ieee80211.
rm -f *.mod.c *.mod *.o .*.cmd *.ko *~
rm -rf /usr/src/sys/modules/if_ndis/rtl8185_linux_26.1027.0823.2007/rtl8185/tmp
make -C /lib/modules//build M=/usr/src/sys/modules/if_ndis/rtl8185_linux_26.1027.0823.2007/rtl8185 CC=gcc modules
make: chdir /lib/modules//build: No such file or directory
*** Error code 1

Stop in /usr/src/sys/modules/if_ndis/rtl8185_linux_26.1027.0823.2007/rtl8185.
KV_BSD#
0
 
LVL 62

Assisted Solution

by:gheist
gheist earned 2000 total points
ID: 23015533
Linux drivers do work with Linux. All you do is worthless. Your card has rtl8187 and not -85 controller.
Please check:

8187 XP driver from realtek
and
Some Linux LiveCD

Others were mentioned for sake of completeness, and will not work without enormous programming effort.
0
 

Author Comment

by:kayvey
ID: 23016877
No points then.  The question clearly states make this work on FreeBSD.  I have linux compat port.  The Belkin
works on my Vista but that has no unix comand line functionality unless I do stupid emulation.  I saw one web page where a FreeBSD person said he gave up on Belkin and bought a different device.  I gave you a list
of devices I could buy.  If you tell me which one is likely to work on FreeBSD.  If that is successful you get points.
0
 

Author Comment

by:kayvey
ID: 23017231
Forget about the Belkin.  I will give you points for telling me to buy the right device off this list that has
a driver so I don't have to reinstall my whole computer into linux or OpenBSD.  I have the time to
buy a new wireless device that works withmy installation.



NETGEAR - Wireless USB 2.0 Adapter
Model: WG111 | SKU: 6825233
        $44.99


Linksys - Ultra RangePlus Dual-Band Wireless-N USB 2.0 Adapter
Model: WUSB600N | SKU: 8682437
         $69.99

Linksys - 802.11g Compact Wireless USB Adapter
Model: WUSB54GC | SKU: 7667009
         $49.99

D-Link - Wireless-N USB 2.0 Adapter
Model: DWA-130 | SKU: 8305602
         $62.99

Dynex® - Wireless-G USB 2.0 Network Adapter
Model: DX-BUSB | SKU: 8544989
Delivers Wireless-G speeds up to
         $34.99


Hawking Technology - Wireless-G USB 2.0 Network Adapter
Model: HWUG1A | SKU: 8454549
        $34.99

D-Link - Xtreme N Dual-Band Wireless-N USB 2.0 Adapter
Model: DWA-160 | SKU: 8858729
        $71.99

Hawking Technology - Wireless-G USB 2.0 Network Adapter
Model: HWUG1 | SKU: 8454638
        $49.99

Linksys - RangePlus Enhanced Wireless-G Network USB 2.0 Adapter
Model: WUSB100 | SKU: 8682286
Complies with enhanced 802.11g standards; backward compatible with 802.11b; MIMO technology
        $69.99

NETGEAR - RangeMax Dual-Band Wireless-N USB Adapter
Model: WNDA3100-100NAS | SKU: 8669942
        $79.99

D-Link - 802.11g RangeBooster G Wireless USB Network Adapter
Model: WUA-2340 | SKU: 7650393
        $44.99

Dynex® - Enhanced Wireless-G USB 2.0 Network Adapter
Model: DX-EBUSB | SKU: 8545041
        $44.99

NETGEAR - RangeMax 802.11g Wireless USB 2.0 Adapter
Model: WPN111 | SKU: 7061797
Data transfer rate up to 108 Mbps via USB 2.0; works with 802.11b, 802.11g and Super G devices; weighs 1.1 oz.
        $59.99

NETGEAR - Rangemax NEXT Wireless-N USB 2.0 Adapter
Model: WN111-100NAS | SKU: 8564378
         $79.99

D-Link - RangeBooster N Wireless-N USB 2.0 Adapter
Model: DWA-140 | SKU: 8674204
         $71.99

Dynex® - Wireless-N USB 2.0 Adapter
Model: DX-NUSB | SKU: 9010205
Delivers Wireless-N speeds up to 270 Mbps; up to 1000' range; WEP encryption
         $59.99

    * Accept and Award Points
    * Accept as Solution
0
 

Author Comment

by:kayvey
ID: 23017242
I forgot a space withmy = with my  

sorry.
0
 
LVL 62

Expert Comment

by:gheist
ID: 23017272
I have something builtin from broadcom in laptop and something realtek-pci-11b-whatever with powerful antenna in home computer. Your netcard prices kind of exceed price of my wireless access point. I am no expert in what you ask. I've heard Aironet and LinkSys are best, but never seen one.
0
 
LVL 62

Accepted Solution

by:
gheist earned 2000 total points
ID: 23020093
It actually depends - If you have -G network there is no reason to purchase -N adaptor at higher price now.

http://www.freebsd.org/cgi/man.cgi?query=rum&sektion=4&apropos=0&manpath=FreeBSD+7.0-RELEASE

Linksys - 802.11g Compact Wireless USB Adapter
Model: WUSB54GC | SKU: 7667009
         $49.99

1) supported
2) not that expensive
0
 

Author Comment

by:kayvey
ID: 23026059
Oh shoot.  I got Netgear WG111v2.  The guy at the store matched the numbers for me.  They said I
could take it back in 14 days.  What a hassle.  Did I blow it?

think I may have messed up.  I got a Netgear WG111v2
KV_BSD# kldstat
Id Refs Address    Size     Name
 1   12 0xc0400000 906518   kernel
 2    1 0xc0d07000 6a32c    acpi.ko
 3    1 0xc4f79000 22000    linux.ko
 4    1 0xc50bf000 21000    radeon.ko
 5    1 0xc50e0000 f000     drm.ko
KV_BSD# find / -name if_ath.ko
/boot/kernel/if_ath.ko
KV_BSD# cd /boot
KV_BSD# ls
beastie.4th    boot2        frames.4th    loader.help    screen.4th
boot        cdboot        kernel        loader.rc    support.4th
boot0        defaults    loader        mbr        zfs
boot0sio    device.hints    loader.4th    modules
boot1        firmware    loader.conf    pxeboot
KV_BSD# ls modules
KV_BSD# kldload if_ndis

KV_BSD# cat /boot/loader.conf
hint.ichss.0.disabled="1"
W32DRIVER_load="YES"
wlan_load="YES"
if_wi_load="YES"
firmware_load="YES"
if_ath_load="YES"

wlan_scan_ap_load="YES"
wlan_scan_sta_load="YES"
wlan_wep_load="YES"
wlan_ccmp_load="YES"
wlan_tkip_load="YES"

KV_BSD#

It's weird that the PATH in my uname -a doesn't exist.. or is it?
V_BSD# find / -name GENERIC
/usr/src/sys/amd64/conf/GENERIC
/usr/src/sys/i386/conf/GENERIC
/usr/src/sys/ia64/conf/GENERIC
/usr/src/sys/pc98/conf/GENERIC
/usr/src/sys/powerpc/conf/GENERIC
/usr/src/sys/sparc64/conf/GENERIC
/usr/src/sys/sun4v/conf/GENERIC
KV_BSD# pwd
/usr/src/sys
KV_BSD# cd i386
KV_BSD# cd conf
KV_BSD# cat GENERIC | grep wlan
device        wlan        # 802.11 support
device        wlan_wep    # 802.11 WEP support
device        wlan_ccmp    # 802.11 CCMP support
device        wlan_tkip    # 802.11 TKIP support
device        wlan_amrr    # AMRR transmit rate control algorithm
device        wlan_scan_ap    # 802.11 AP mode scanning
device        wlan_scan_sta    # 802.11 STA mode scanning

KV_BSD# uname -a
FreeBSD KV_BSD 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23026064
KV_BSD# ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (100baseTX <full-duplex>)
      status: active
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
KV_BSD# dmesg | grep ath0
KV_BSD# dmesg | grep CardBus
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
KV_BSD# kld_load if_ath
zsh: command not found: kld_load
KV_BSD# kldload if_ath
kldload: can't load if_ath: File exists
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23026103
I left my peroxide at my friend's house.. I guess I will go back to the store and exchange now

{:(

http://www.mavetju.org/mail/view_message.php?list=freebsd-usb&id=2646690
0
 

Author Comment

by:kayvey
ID: 23026196
btw I know I need the right if_(interface)_load="YES" in /boot/loader.conf, but
is it okay all that other wlan stuff?  You see me with if_wi_load="YES" I changed
it a couple times.  The website I gave talks about that same RTL8187 stuff that
you said wasn't supported.. So I have to exchange for your recommendation.
After that I will put if_rum_load="YES" in.. but is that really all I do?  
0
 

Author Comment

by:kayvey
ID: 23026715
D# killall moused
KV_BSD# moused -p /dev/ums0
KV_BSD# ifconfig
rum0: flags=108802<BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
        ether 00:1e:e5:ff:6c:66
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        ssid "" channel 1 (2412 Mhz 11b)
        authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
        bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 bintval 0
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:11:d8:22:c9:91
        inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 02:e0:18:26:4c:e9
        ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
KV_BSD#


yaay!  {:)  Can I give you points now? Do I have your permission?  I am at home so I am using
ethernet wire.

I probably have to test it in Berkeley

      inet 127.0.0.1 netmask 0xff000000
KV_BSD# ifconfig rum0 up
KV_BSD# dhclient rum0
rum0: no link ..........

Is it really that much programming to write a device driver?  I still have the Belkin device. I want
to write a driver.  YOu think I can do it?  {:}
0
 
LVL 62

Assisted Solution

by:gheist
gheist earned 2000 total points
ID: 23030932
ifconfig command did not associate with access point. Since it runs using rum driver, this is actually v4000 belkin card...
Please read handbook on command-line wireless auth... Let me suggest some graphic tool instead...
0
 
LVL 62

Expert Comment

by:gheist
ID: 23031030
It is OK to load all the loadable drivers in loader.conf They take memory but keep silent until device is plugged in and detected...

0
 

Author Comment

by:kayvey
ID: 23037055
I am in Berkeley now, using their Microsoft to talk to you.  I have my FreeBSD laptop running right next
to this desktop I am typing on.  The procedure I have seen to get a wireless connection here is to open
a browser and it goes to "Airbears" site and then username and password is typed there to allow all
internet applications to operate.  At SFSU the procedure I use with ethernet plugged in RJ-45 jack is:

1) ifconfig bge0 up
2) dhclient bge0

... and my internet goes up.  I thought this would work for rum0..

1) ifconfig rum0 up
2) dhclient rum0
  and it looks similar to SFSU,  tells me this return data:

DHCPDISCOVER on rum0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on rum0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on rum0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on rum0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on rum0 to 255.255.255.255 port 67 interval 14
No DHCPOFFERS received.
No working leases in persistent database - sleeping

Browsers all say "problem loading page" instead of airbears login prompt.

You say you can do authentication on command line?

I am looking here:

http://www.freebsd.org/doc/en/books/handbook/network-wireless.html

I see some things in config files.. but I don't have the airbears login, and my partners will not be
happy giving me persistent copy of their password.  There is a way to type password on my
KV_BSD# command line (I love my KV_BSD# command line, remember?) and connect to airbears
wireless network via rum0 ?

If I write a device driver for Belkin, it will be called "ikv0"  {:)  I bought one very cheap book,

Here are the order details.
---------------------------------------------------
Date:                November 24,2008
 
Amazon Order #:      002-0214813-4741034

 1 of Writing a Unix Device Driver, $1.05


Maybe a professor tells me the expensive one is better.  {:)
0
 

Author Comment

by:kayvey
ID: 23037157
Oh gee.  I tried man page for rum0.  Is this what I need?  

KV_BSD# dhclient -u rum0
DHCPREQUEST on rum0 to 255.255.255.255 port 67
DHCPACK from 1.1.1.1
bound to 136.152.171.194 -- renewal in 450 seconds.
0
 

Author Comment

by:kayvey
ID: 23037163
0
 

Author Comment

by:kayvey
ID: 23037175
Ephiphany browser gives "do not enter" sign (red circle with white bar in it.  In america, if you drive
your car there, you get head on collision) and says

 "www.google.com" could not be found.
0
 

Author Comment

by:kayvey
ID: 23039075
Oh dear.  I talked to an IT guy for a long time there.  He said it would be better to compile the driver into
the kernel.

. . .

Heh  {:}
0
 

Author Comment

by:kayvey
ID: 23039079
Incredibly insane things happened to my gnome while sitting in his office.  It melted MELTED! What a WORLD!
I'm MELTING!
0
 
LVL 62

Expert Comment

by:gheist
ID: 23040223
32.3.3.1.1 How to Find Access Points
...
# ifconfig ath0 up scan
0
 

Author Comment

by:kayvey
ID: 23073615
I think that guy tried that. I am not using that computer right now. I made typescripts of all
the stuff he did.  He told me I should use the  compile into kernel option instead of /boot/loader.conf
I am going to try to do that hopefully soon.  If the semester passes before I accomplish it I promise
I will give you points for all your good help.
0
 

Author Comment

by:kayvey
ID: 23110676
64 bytes from 68.180.206.184: icmp_seq=53 ttl=52 time=4.008 ms
64 bytes from 68.180.206.184: icmp_seq=54 ttl=52 time=4.050 ms
64 bytes from 68.180.206.184: icmp_seq=55 ttl=52 time=4.212 ms
zsh: terminated  ping yahoo.com
KV_BSD# ls
.cshrc            .gstreamer-0.10      .mozilla      .wapi            ar2
.gconf            .history      .profile      airbears      ari2
.gconfd            .k5login      .qt            airbears2      wi_driver
.gnome2            .login            .subversion      airbears3
KV_BSD# pwd        
/root
KV_BSD# cat airbears
Script started on Tue Nov 25 13:59:13 2008
KV_BSD# ifconfig -a
rum0: flags=108802<BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
        ether 00:1e:e5:ff:6c:66
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        ssid "" channel 1 (2412 Mhz 11b)
        authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
        bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 bintval 0
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:11:d8:22:c9:91
        inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (none)
        status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 02:e0:18:26:4c:e9
        ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
KV_BSD# ps -ef
ps: Process environment requires procfs(5)
  PID  TT  STAT      TIME COMMAND
 1505  v0  Is+    0:00.00  /usr/libexec/getty Pc ttyv0
 1506  v1  Is+    0:00.00  /usr/libexec/getty Pc ttyv1
 1507  v2  Is+    0:00.00  /usr/libexec/getty Pc ttyv2
 1508  v3  Is+    0:00.00  /usr/libexec/getty Pc ttyv3
 1509  v4  Is+    0:00.00  /usr/libexec/getty Pc ttyv4
 1510  v5  Is+    0:00.00  /usr/libexec/getty Pc ttyv5
 1511  v6  Is+    0:00.00  /usr/libexec/getty Pc ttyv6
 1512  v7  Is+    0:00.00  /usr/libexec/getty Pc ttyv7
 1705  p3  I      0:00.02  su -
 1706  p3  I      0:00.05  -su (zsh)
 1710  p3  R+     0:00.01  script airbears
 1712  p4  Ss     0:00.04  /usr/local/bin/zsh -i
 1714  p4  R+     0:00.00  ps -ef
KV_BSD# ps aux
USER    PID %CPU %MEM   VSZ   RSS  TT  STAT STARTED      TIME COMMAND
root     11 96.9  0.0     0     8  ??  RL    1:01PM  57:10.95 [idle: cpu0]
root   1393  0.2  2.4 99588 36952  ??  S     1:04PM   0:05.36 /usr/local/bin/X
root      0  0.0  0.0     0     0  ??  WLs   1:01PM   0:00.00 [swapper]
root      1  0.0  0.0  1888   460  ??  ILs   1:01PM   0:00.01 /sbin/init --
root      2  0.0  0.0     0     8  ??  DL    1:01PM   0:00.13 [g_event]
root      3  0.0  0.0     0     8  ??  DL    1:01PM   0:00.31 [g_up]
root      4  0.0  0.0     0     8  ??  DL    1:01PM   0:00.31 [g_down]
root      5  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [thread taskq]
root      6  0.0  0.0     0     8  ??  DL    1:01PM   0:00.42 [acpi_task_0]
root      7  0.0  0.0     0     8  ??  DL    1:01PM   0:00.22 [acpi_task_1]
root      8  0.0  0.0     0     8  ??  DL    1:01PM   0:00.47 [acpi_task_2]
root      9  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [xpt_thrd]
root     10  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [audit]
root     12  0.0  0.0     0     8  ??  WL    1:01PM   0:03.69 [swi4: clock sio]
root     13  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [swi3: vm]
root     14  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [swi1: net]
root     15  0.0  0.0     0     8  ??  DL    1:01PM   0:00.15 [yarrow]
root     16  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [swi5: +]
root     17  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [swi6: Giant task
root     18  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [swi6: task queue
root     19  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [swi2: cambio]
root     20  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [kqueue taskq]
root     21  0.0  0.0     0     8  ??  WL    1:01PM   0:00.04 [irq9: acpi0]
root     22  0.0  0.0     0     8  ??  WL    1:01PM   0:01.21 [irq11: cbb1 uhci
root     23  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [usb0]
root     24  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [usbtask-hc]
root     25  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [usbtask-dr]
root     26  0.0  0.0     0     8  ??  WL    1:01PM   0:00.05 [irq5: uhci1]
root     27  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [usb1]
root     28  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [irq10: fwohci0++
root     29  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [usb2]
root     30  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [usb3]
root     31  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [irq4: cbb0 bge0]
root     32  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [cbb0 event threa
root     33  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [cbb1 event threa
root     34  0.0  0.0     0     8  ??  DL    1:01PM   0:00.17 [fw0_taskq]
root     35  0.0  0.0     0     8  ??  IL    1:01PM   0:00.00 [fw0_probe]
root     36  0.0  0.0     0     8  ??  WL    1:01PM   0:00.12 [irq14: ata0]
root     37  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [irq15: ata1]
root     38  0.0  0.0     0     8  ??  DL    1:01PM   0:00.81 [acpi_thermal]
root     39  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [acpi_cooling0]
root     40  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [irq1: atkbd0]
root     41  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [irq12: psm0]
root     42  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [swi0: sio]
root     43  0.0  0.0     0     8  ??  WL    1:01PM   0:00.00 [irq7: ppbus0 ppc
root     44  0.0  0.0     0    16  ??  DL    1:01PM   0:00.00 [sctp_iterator]
root     45  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [pagedaemon]
root     46  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [vmdaemon]
root     47  0.0  0.0     0     8  ??  DL    1:01PM   0:00.00 [pagezero]
root     48  0.0  0.0     0     8  ??  DL    1:01PM   0:00.02 [bufdaemon]
root     49  0.0  0.0     0     8  ??  DL    1:01PM   0:00.01 [vnlru]
root     50  0.0  0.0     0     8  ??  DL    1:01PM   0:00.85 [syncer]
root     51  0.0  0.0     0     8  ??  DL    1:01PM   0:00.04 [softdepflush]
root     52  0.0  0.0     0     8  ??  DL    1:01PM   0:00.23 [schedcpu]
root    183  0.0  0.0  1356   760  ??  Is    1:01PM   0:00.00 adjkerntz -i
root    861  0.0  0.0  1888   544  ??  Is    1:01PM   0:00.01 /sbin/devd
root    929  0.0  0.1  3156  1148  ??  Ss    1:01PM   0:00.11 /usr/sbin/syslogd
root   1391  0.0  0.4 28344  6176  ??  Is    1:04PM   0:00.02 /usr/local/sbin/g
root   1392  0.0  0.4 28568  6928  ??  I     1:04PM   0:00.05 /usr/local/sbin/g
kayve  1409  0.0  0.4 22740  6184  ??  S     1:04PM   0:01.33 /usr/local/libexe
kayve  1411  0.0  0.3 21624  5412  ??  S     1:04PM   0:00.08 /usr/local/bin/gn
kayve  1412  0.0  1.1 48480 17768  ??  Is    1:04PM   0:00.77 gnome-session
kayve  1431  0.0  0.1  3312  1756  ??  Is    1:04PM   0:00.10 dbus-daemon --for
kayve  1433  0.0  1.4 44144 21988  ??  I     1:04PM   0:05.84 /usr/local/libexe
kayve  1448  0.0  1.4 49300 22420  ??  S     1:04PM   0:02.75 gnome-panel --sm-
kayve  1452  0.0  0.3 20920  4756  ??  I     1:04PM   0:00.06 /usr/local/libexe
root   1455  0.0  0.2  5848  3056  ??  Ss    1:04PM   0:00.06 sendmail: accepti
smmsp  1459  0.0  0.2  5848  3116  ??  Is    1:05PM   0:00.00 sendmail: Queue r
root   1465  0.0  0.1  3184  1208  ??  Is    1:05PM   0:00.01 /usr/sbin/cron -s
kayve  1518  0.0  0.4 23032  5872  ??  Is    1:07PM   0:00.51 /usr/local/libexe
kayve  1531  0.0  0.3 19848  4412  ??  SN    1:07PM   0:01.75 /usr/local/libexe
kayve  1533  0.0  1.2 48860 18880  ??  I     1:07PM   0:01.01 /usr/local/libexe
kayve  1535  0.0  1.2 49236 19096  ??  I     1:07PM   0:00.60 /usr/local/libexe
kayve  1537  0.0  1.3 42776 20764  ??  I     1:07PM   0:01.17 /usr/local/libexe
kayve  1539  0.0  1.0 35548 15108  ??  I     1:07PM   0:00.40 /usr/local/libexe
kayve  1566  0.0  1.3 41864 20512  ??  I     1:11PM   0:01.29 gnome-terminal
kayve  1581  0.0  0.3 21364  5356  ??  S     1:17PM   0:00.19 /usr/local/libexe
kayve  1587  0.0  0.3 20920  5032  ??  I     1:17PM   0:00.06 /usr/local/libexe
kayve  1617  0.0  2.2 63916 34060  ??  S     1:26PM   0:05.61 nautilus --sm-cli
root   1631  0.0  0.2 19900  3484  ??  I     1:32PM   0:00.04 gnome-pty-helper
root   1709  0.0  0.1  3240   968  ??  Ss    1:59PM   0:00.05 moused -p /dev/um
root   1505  0.0  0.1  3156  1024  v0  Is+   1:05PM   0:00.00 /usr/libexec/gett
root   1506  0.0  0.1  3156  1024  v1  Is+   1:05PM   0:00.00 /usr/libexec/gett
root   1507  0.0  0.1  3156  1024  v2  Is+   1:05PM   0:00.00 /usr/libexec/gett
root   1508  0.0  0.1  3156  1024  v3  Is+   1:05PM   0:00.00 /usr/libexec/gett
root   1509  0.0  0.1  3156  1024  v4  Is+   1:05PM   0:00.00 /usr/libexec/gett
root   1510  0.0  0.1  3156  1024  v5  Is+   1:05PM   0:00.00 /usr/libexec/gett
root   1511  0.0  0.1  3156  1024  v6  Is+   1:05PM   0:00.00 /usr/libexec/gett
root   1512  0.0  0.1  3156  1024  v7  Is+   1:05PM   0:00.00 /usr/libexec/gett
kayve  1633  0.0  0.2  4164  3216  p0  Is+   1:32PM   0:00.16 zsh
kayve  1650  0.0  0.2  4164  3216  p1  Is+   1:33PM   0:00.16 zsh
kayve  1654  0.0  0.2  4164  3216  p2  Is+   1:33PM   0:00.16 zsh
kayve  1658  0.0  0.2  4164  3216  p3  Is    1:33PM   0:00.17 zsh
root   1705  0.0  0.1  3592  1528  p3  I     1:58PM   0:00.02 su -
root   1706  0.0  0.2  3844  2844  p3  I     1:58PM   0:00.05 -su (zsh)
root   1710  0.0  0.1  3156  1004  p3  S+    1:59PM   0:00.01 script airbears
root   1712  0.0  0.2  3808  2852  p4  Ss    1:59PM   0:00.04 /usr/local/bin/zs
root   1715  0.0  0.1  3256  1076  p4  R+    1:59PM   0:00.00 ps aux
KV_BSD# top

last pid:  1735;  load averages:  0.00,  0.00,  0.00    up 0+00:59:07  14:00:08
52 processes:  1 running, 51 sleeping
CPU states:  0.8% user,  0.0% nice,  0.4% system,  0.0% interrupt, 98.8% idle
Mem: 73M Active, 37M Inact, 89M Wired, 528K Cache, 85M Buf, 1296M Free
Swap: 2200M Total, 2200M Free

  PID USERNAME       THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
 1393 root             1  96    0 99588K 36956K select   0:06  1.37% Xorg
 1433 kayve            2  -8    0 44144K 21988K piperd   0:06  0.00% gnome-sett
 1617 kayve            1  96    0 63916K 34060K select   0:06  0.00% nautilus
 1448 kayve            1  96    0 49300K 22420K select   0:03  0.00% gnome-pane
 1531 kayve            1 115   19 19848K  4412K select   0:02  0.00% gam_server
 1566 kayve            2  -8    0 41864K 20784K piperd   0:01  0.00% gnome-term
 1409 kayve            1  96    0 22740K  6184K select   0:01  0.00% gconfd-2
 1537 kayve            1  96    0 42776K 20764K select   0:01  0.00% clock-appl
 1533 kayve            1  96    0 48860K 18880K select   0:01  0.00% wnck-apple
 1412 kayve            2  -8    0 48480K 17768K piperd   0:01  0.00% gnome-sess
 1535 kayve            1  96    0 49236K 19096K select   0:01  0.00% mixer_appl
 1518 kayve            2  96    0 23032K  5872K select   0:01  0.00% bonobo-act
 1539 kayve            1  96    0 35548K 15108K select   0:00  0.00% notificati
 1581 kayve            1  96    0 21364K  5356K select   0:00  0.00% gvfsd-tras
 1658 kayve            1  20    0  4164K  3216K pause    0:00  0.00% zsh
 1654 kayve            1   5    0  4164K  3216K ttyin    0:00  0.00% zsh
KV_BSD# ifconfig -a  
rum0: flags=108802<BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
        ether 00:1e:e5:ff:6c:66
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        ssid "" channel 1 (2412 Mhz 11b)
        authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
        bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 bintval 0
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:11:d8:22:c9:91
        inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (none)
        status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 02:e0:18:26:4c:e9
        ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
KV_BSD# man rum
RUM(4)                 FreeBSD Kernel Interfaces Manual                 RUM(4)

NAME
     rum -- Ralink Technology USB IEEE 802.11a/b/g wireless network device

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device ehci
           device uhci
           device ohci
           device usb
           device rum
           device wlan
           device wlan_amrr

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           if_rum_load="YES"

DESCRIPTION
     The rum driver supports USB 2.0 and PCI Express Mini Card wireless
     adapters based on the Ralink RT2501USB and RT2601USB chipsets.

     Ralink PCI Express Mini Card adapters show up as normal USB 2.0 devices
     and are thus handled by the rum driver.
KV_BSD# ifconfig -a rum0
usage: ifconfig [-L] [-C] [-g groupname] interface address_family [address [dest_address]]
                [parameters]
       ifconfig interface create
       ifconfig -a [-L] [-C] [-g groupname] [-d] [-m] [-u] [-v] [address_family]
       ifconfig -l [-d] [-u] [address_family]
       ifconfig [-L] [-C] [-g groupname] [-d] [-m] [-u] [-v]
KV_BSD# ifconfig -a | more
rum0: flags=108802<BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
        ether 00:1e:e5:ff:6c:66
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        ssid "" channel 1 (2412 Mhz 11b)
        authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
        bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 bintval 0
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:11:d8:22:c9:91
        inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (none)
        status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 02:e0:18:26:4c:e9
        ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet6 ::1 prefixlen 128
KV_BSD# wpa_cli
wpa_cli v0.5.8
Copyright (c) 2004-2007, Jouni Malinen <j@w1.fi> and contributors

This program is free software. You can distribute it and/or modify it
under the terms of the GNU General Public License version 2.

Alternatively, this software may be distributed under the terms of the
BSD license. See README and COPYING for more details.


Could not connect to wpa_supplicant - re-trying

ccccc


^[c^[c^[

^[c^[c^[c^[

Script done on Tue Nov 25 14:02:41 2008
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23110682
KV_BSD# cat airbears2
Script started on Tue Nov 25 14:58:02 2008
KV_BSD# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/rum already exists!
Module uhub/rum failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (600.03-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 1609826304 (1535 MB)
avail memory = 1563754496 (1491 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.ACS_] (Node 0xc4920400), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.AC__._INI] (Node 0xc491fd20), AE_NOT_EXIST
acpi0: Power Button (fixed)
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6120d2906000612
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xd0000000-0xd7ffffff,0xff8f0000-0xff8fffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 5 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 10 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffaffc00-0xffafffff irq 10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
rum0: <Cisco-Linksys Compact Wireless-G USB Adapter, class 0/0, rev 2.00/0.01, addr 2> on uhub3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
rum0: Ethernet address: 00:1e:e5:ff:6c:66
rum0: if_start running deferred for Giant
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x3003> mem 0xff9f0000-0xff9fffff irq 4 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:11:d8:22:c9:91
bge0: [ITHREAD]
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
fwohci0: <Ricoh R5C552> mem 0xff9ef800-0xff9effff irq 10 at device 1.2 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:26:4c:e9
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12d4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:26:4c:e9
fwe0: Ethernet address: 02:e0:18:26:4c:e9
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:e0:18:00:03:26:4c:e9 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub1
ums0: 8 buttons and Z dir.
Timecounter "TSC" frequency 600025077 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 114473MB <Hitachi HTS541612J9AT00 SBDOA70H> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TC51> at ata1-master UDMA33
GEOM_LABEL: Label for provider acd0 is iso9660/WUSB54GC.
Trying to mount root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
rum0: at uhub3 port 1 (addr 2) disconnected
rum0: could not multi read MAC register: IOERROR
0
 

Author Comment

by:kayvey
ID: 23110687
KV_BSD# cat airbears3
scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ethe#                                                                                                                                              KV_BSD#
0
 

Author Comment

by:kayvey
ID: 23110692

KV_BSD# head -300 ar2
Script started on Tue Nov 25 14:07:59 2008
KV_BSD# wpa_cli status
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
KV_BSD# wpa_cli      
wpa_cli v0.5.8
Copyright (c) 2004-2007, Jouni Malinen <j@w1.fi> and contributors

This program is free software. You can distribute it and/or modify it
under the terms of the GNU General Public License version 2.

Alternatively, this software may be distributed under the terms of the
BSD license. See README and COPYING for more details.


Could not connect to wpa_supplicant - re-trying

zsh: killed     wpa_cli
KV_BSD#
KV_BSD# ifconfig rum0 up scan
zsh: killed     ifconfig rum0 up scan
KV_BSD# dhclient
usage: dhclient [-bdqu] [-c conffile] [-l leasefile] interface
KV_BSD# dhclient rum0
rum0: no link .............. giving up
KV_BSD# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/rum already exists!
Module uhub/rum failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (600.03-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 1609826304 (1535 MB)
avail memory = 1563754496 (1491 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.ACS_] (Node 0xc4920400), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.AC__._INI] (Node 0xc491fd20), AE_NOT_EXIST
acpi0: Power Button (fixed)
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6120d2906000612
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xd0000000-0xd7ffffff,0xff8f0000-0xff8fffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 5 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 10 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffaffc00-0xffafffff irq 10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
rum0: <Cisco-Linksys Compact Wireless-G USB Adapter, class 0/0, rev 2.00/0.01, addr 2> on uhub3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
rum0: Ethernet address: 00:1e:e5:ff:6c:66
rum0: if_start running deferred for Giant
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x3003> mem 0xff9f0000-0xff9fffff irq 4 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:11:d8:22:c9:91
bge0: [ITHREAD]
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
fwohci0: <Ricoh R5C552> mem 0xff9ef800-0xff9effff irq 10 at device 1.2 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:26:4c:e9
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12d4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:26:4c:e9
fwe0: Ethernet address: 02:e0:18:26:4c:e9
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:e0:18:00:03:26:4c:e9 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub1
ums0: 8 buttons and Z dir.
Timecounter "TSC" frequency 600025275 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 114473MB <Hitachi HTS541612J9AT00 SBDOA70H> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TC51> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s2a
drm0: <ATI Radeon RV350 Mobility 9600 M10 NP> on vgapci0
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized radeon 1.25.0 20060524
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
pid 1526 (trackerd), uid 1001: exited on signal 11 (core dumped)
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
KV_BSD#
KV_BSD#
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 14 (2484 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 7 (2442 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23110697
     protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 2 (2417 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 9 (2452 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 6 (2437 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 4 (2427 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 12 (2467 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23110703

KV_BSD# tail - 300 ar2
tail: -: No such file or directory
tail: 300: No such file or directory
==> ar2 <==
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 6 (2437 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig rum0 up scan
zsh: killed     ifconfig rum0 up scan
KV_BSD# ifconfig rum0 scan
KV_BSD# tail -300 ar2
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 2 (2417 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 8 (2447 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 14 (2484 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 2 (2417 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 5 (2432 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 14 (2484 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 2 (2417 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 8 (2447 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 1 (2412 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 3 (2422 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 9 (2452 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 6 (2437 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
KV_BSD# ifconfig rum0 up scan
zsh: killed     ifconfig rum0 up scan
KV_BSD# ifconfig rum0 scan
KV_BSD#

0
 

Author Comment

by:kayvey
ID: 23110707

KV_BSD# head -300 ari2
Script started on Tue Nov 25 14:04:10 2008
KV_BSD# ls -al
total 54
drwxr-xr-x  11 root  wheel    512 Nov 25 14:04 .
drwxr-xr-x  20 root  wheel    512 Nov 25 11:59 ..
-rw-r--r--   2 root  wheel    786 Feb 24  2008 .cshrc
drwx------   2 root  wheel    512 Nov  9 20:02 .gconf
drwx------   2 root  wheel    512 Nov  9 20:02 .gconfd
drwx------   2 root  wheel    512 Nov  9 19:26 .gnome2
drwxr-xr-x   2 root  wheel    512 Nov  9 20:02 .gstreamer-0.10
-rw-------   1 root  wheel    797 Oct 20 14:34 .history
-rw-r--r--   1 root  wheel    143 Feb 24  2008 .k5login
-rw-r--r--   1 root  wheel    313 Oct 21 17:54 .login
drwx------   2 root  wheel    512 Oct 20 11:42 .mozilla
-rwxr-xr-x   2 root  wheel    273 Oct 21 17:55 .profile
drwxr-xr-x   2 root  wheel    512 Nov  8 16:51 .qt
drwxr-xr-x   3 root  wheel    512 Nov  9 00:21 .subversion
drwxr-xr-x   2 root  wheel    512 Nov  8 09:41 .wapi
-rw-r--r--   1 root  wheel  20305 Nov 25 14:02 airbears
-rw-r--r--   1 root  wheel     43 Nov 25 14:04 ari2
drwxr-xr-x   2 root  wheel    512 Nov 16 18:04 wi_driver
KV_BSD# cd /etc/rc.d
KV_BSD# ls -l
total 362
-r-xr-xr-x  1 root  wheel    241 Feb 24  2008 DAEMON
-r-xr-xr-x  1 root  wheel    405 Feb 24  2008 FILESYSTEMS
-r-xr-xr-x  1 root  wheel    404 Feb 24  2008 LOGIN
-r-xr-xr-x  1 root  wheel    339 Feb 24  2008 NETWORKING
-r-xr-xr-x  1 root  wheel    243 Feb 24  2008 SERVERS
-r-xr-xr-x  1 root  wheel    981 Feb 24  2008 abi
-r-xr-xr-x  1 root  wheel    952 Feb 24  2008 accounting
-r-xr-xr-x  1 root  wheel    536 Feb 24  2008 addswap
-r-xr-xr-x  1 root  wheel    285 Feb 24  2008 adjkerntz
-r-xr-xr-x  1 root  wheel    974 Feb 24  2008 amd
-r-xr-xr-x  1 root  wheel    614 Feb 24  2008 apm
-r-xr-xr-x  1 root  wheel    775 Feb 24  2008 apmd
-r-xr-xr-x  1 root  wheel    678 Feb 24  2008 archdep
-r-xr-xr-x  1 root  wheel   4151 Feb 24  2008 atm1
-r-xr-xr-x  1 root  wheel   2628 Feb 24  2008 atm2
-r-xr-xr-x  1 root  wheel   2406 Feb 24  2008 atm3
-r-xr-xr-x  1 root  wheel    574 Feb 24  2008 auditd
-r-xr-xr-x  1 root  wheel    577 Feb 24  2008 auto_linklocal
-r-xr-xr-x  1 root  wheel    887 Feb 24  2008 bgfsck
-r-xr-xr-x  1 root  wheel   9386 Feb 24  2008 bluetooth
-r-xr-xr-x  1 root  wheel    333 Feb 24  2008 bootparams
-r-xr-xr-x  1 root  wheel   2298 Feb 24  2008 bridge
-r-xr-xr-x  1 root  wheel    301 Feb 24  2008 bsnmpd
-r-xr-xr-x  1 root  wheel    642 Feb 24  2008 bthidd
-r-xr-xr-x  1 root  wheel    328 Feb 24  2008 ccd
-r-xr-xr-x  1 root  wheel   1329 Feb 24  2008 cleanvar
-r-xr-xr-x  1 root  wheel   1703 Feb 24  2008 cleartmp
-r-xr-xr-x  1 root  wheel    382 Feb 24  2008 cron
-r-xr-xr-x  1 root  wheel    441 Feb 24  2008 devd
-r-xr-xr-x  1 root  wheel   1404 Feb 24  2008 devfs
-r-xr-xr-x  1 root  wheel   1029 Feb 24  2008 dhclient
-r-xr-xr-x  1 root  wheel    427 Feb 24  2008 dmesg
-r-xr-xr-x  1 root  wheel   1120 Feb 24  2008 dumpon
-r-xr-xr-x  1 root  wheel    383 Feb 24  2008 early.sh
-r-xr-xr-x  1 root  wheel   1151 Feb 24  2008 encswap
-r-xr-xr-x  1 root  wheel   1219 Feb 24  2008 fsck
-r-xr-xr-x  1 root  wheel    257 Feb 24  2008 ftp-proxy
-r-xr-xr-x  1 root  wheel    359 Feb 24  2008 ftpd
-r-xr-xr-x  1 root  wheel   2173 Feb 24  2008 gbde
-r-xr-xr-x  1 root  wheel   2702 Feb 24  2008 geli
-r-xr-xr-x  1 root  wheel   1951 Feb 24  2008 geli2
-r-xr-xr-x  1 root  wheel    445 Feb 24  2008 hcsecd
-r-xr-xr-x  1 root  wheel    446 Feb 24  2008 hostapd
-r-xr-xr-x  1 root  wheel   2790 Feb 24  2008 hostid
-r-xr-xr-x  1 root  wheel   2630 Feb 24  2008 hostname
-r-xr-xr-x  1 root  wheel    308 Feb 24  2008 idmapd
-r-xr-xr-x  1 root  wheel    367 Feb 24  2008 inetd
-r-xr-xr-x  1 root  wheel   1628 Feb 24  2008 initrandom
-r-xr-xr-x  1 root  wheel   1596 Feb 24  2008 ip6addrctl
-r-xr-xr-x  1 root  wheel   1036 Feb 24  2008 ip6fw
-r-xr-xr-x  1 root  wheel   2196 Feb 24  2008 ipfilter
-r-xr-xr-x  1 root  wheel   1038 Feb 24  2008 ipfs
-r-xr-xr-x  1 root  wheel   1212 Feb 24  2008 ipfw
-r-xr-xr-x  1 root  wheel    696 Feb 24  2008 ipmon
-r-xr-xr-x  1 root  wheel    562 Feb 24  2008 ipnat
-r-xr-xr-x  1 root  wheel   1119 Feb 24  2008 ipsec
-r-xr-xr-x  1 root  wheel    317 Feb 24  2008 ipxrouted
-r-xr-xr-x  1 root  wheel   1014 Feb 24  2008 isdnd
-r-xr-xr-x  1 root  wheel  10633 Feb 24  2008 jail
-r-xr-xr-x  1 root  wheel    347 Feb 24  2008 kadmind
-r-xr-xr-x  1 root  wheel    313 Feb 24  2008 kerberos
-r-xr-xr-x  1 root  wheel    465 Feb 24  2008 kernel
-r-xr-xr-x  1 root  wheel    512 Feb 24  2008 keyserv
-r-xr-xr-x  1 root  wheel    660 Feb 24  2008 kldxref
-r-xr-xr-x  1 root  wheel    347 Feb 24  2008 kpasswdd
-r-xr-xr-x  1 root  wheel   1803 Feb 24  2008 ldconfig
-r-xr-xr-x  1 root  wheel    535 Feb 24  2008 local
-r-xr-xr-x  1 root  wheel   1147 Feb 24  2008 localpkg
-r-xr-xr-x  1 root  wheel    935 Feb 24  2008 lockd
-r-xr-xr-x  1 root  wheel    419 Feb 24  2008 lpd
-r-xr-xr-x  1 root  wheel   5130 Feb 24  2008 mdconfig
-r-xr-xr-x  1 root  wheel   6005 Feb 24  2008 mdconfig2
-r-xr-xr-x  1 root  wheel   2462 Feb 24  2008 mixer
-r-xr-xr-x  1 root  wheel    977 Feb 24  2008 motd
-r-xr-xr-x  1 root  wheel    961 Feb 24  2008 mountcritlocal
-r-xr-xr-x  1 root  wheel   1535 Feb 24  2008 mountcritremote
-r-xr-xr-x  1 root  wheel   1026 Feb 24  2008 mountd
-r-xr-xr-x  1 root  wheel    520 Feb 24  2008 mountlate
-r-xr-xr-x  1 root  wheel   1659 Feb 24  2008 moused
-r-xr-xr-x  1 root  wheel    273 Feb 24  2008 mroute6d
-r-xr-xr-x  1 root  wheel    378 Feb 24  2008 mrouted
-r-xr-xr-x  1 root  wheel    283 Feb 24  2008 msgs
-r-xr-xr-x  1 root  wheel   3804 Feb 24  2008 named
-r-xr-xr-x  1 root  wheel    768 Feb 24  2008 natd
-r-xr-xr-x  1 root  wheel   4322 Feb 24  2008 netif
-r-xr-xr-x  1 root  wheel   1360 Feb 24  2008 netoptions
-r-xr-xr-x  1 root  wheel   3790 Feb 24  2008 network_ipv6
-r-xr-xr-x  1 root  wheel    453 Feb 24  2008 newsyslog
-r-xr-xr-x  1 root  wheel    955 Feb 24  2008 nfsclient
-r-xr-xr-x  1 root  wheel    870 Feb 24  2008 nfsd
-r-xr-xr-x  1 root  wheel    321 Feb 24  2008 nfsserver
-r-xr-xr-x  1 root  wheel   1828 Feb 24  2008 nisdomain
-r-xr-xr-x  1 root  wheel   1061 Feb 24  2008 nscd
-r-xr-xr-x  1 root  wheel   2609 Feb 24  2008 nsswitch
-r-xr-xr-x  1 root  wheel   1286 Feb 24  2008 ntpd
-r-xr-xr-x  1 root  wheel    642 Feb 24  2008 ntpdate
-r-xr-xr-x  1 root  wheel    350 Feb 24  2008 othermta
-r-xr-xr-x  1 root  wheel   1282 Feb 24  2008 pf
-r-xr-xr-x  1 root  wheel    932 Feb 24  2008 pflog
-r-xr-xr-x  1 root  wheel    987 Feb 24  2008 pfsync
-r-xr-xr-x  1 root  wheel   2120 Feb 24  2008 power_profile
-r-xr-xr-x  1 root  wheel    422 Feb 24  2008 powerd
-r-xr-xr-x  1 root  wheel   1879 Feb 24  2008 ppp
-r-xr-xr-x  1 root  wheel    586 Feb 24  2008 pppoed
-r-xr-xr-x  1 root  wheel    453 Feb 24  2008 pwcheck
-r-xr-xr-x  1 root  wheel    601 Feb 24  2008 quota
-r-xr-xr-x  1 root  wheel   1763 Feb 24  2008 random
-r-xr-xr-x  1 root  wheel    346 Feb 24  2008 rarpd
-r-xr-xr-x  1 root  wheel   1982 Feb 24  2008 resolv
-r-xr-xr-x  1 root  wheel    728 Feb 24  2008 root
-r-xr-xr-x  1 root  wheel    606 Feb 24  2008 route6d
-r-xr-xr-x  1 root  wheel    500 Feb 24  2008 routed
-r-xr-xr-x  1 root  wheel   2246 Feb 24  2008 routing
-r-xr-xr-x  1 root  wheel    275 Feb 24  2008 rpcbind
-r-xr-xr-x  1 root  wheel   1675 Feb 24  2008 rtadvd
-r-xr-xr-x  1 root  wheel    259 Feb 24  2008 rwho
-r-xr-xr-x  1 root  wheel   1160 Feb 24  2008 savecore
-r-xr-xr-x  1 root  wheel    456 Feb 24  2008 sdpd
-r-xr-xr-x  1 root  wheel    528 Feb 24  2008 securelevel
-r-xr-xr-x  1 root  wheel   2550 Feb 24  2008 sendmail
-r-xr-xr-x  1 root  wheel   5159 Feb 24  2008 serial
-r-xr-xr-x  1 root  wheel    822 Feb 24  2008 sppp
-r-xr-xr-x  1 root  wheel   2279 Feb 24  2008 sshd
-r-xr-xr-x  1 root  wheel    933 Feb 24  2008 statd
-r-xr-xr-x  1 root  wheel    260 Feb 24  2008 swap1
-r-xr-xr-x  1 root  wheel   4552 Feb 24  2008 syscons
-r-xr-xr-x  1 root  wheel    859 Feb 24  2008 sysctl
-r-xr-xr-x  1 root  wheel   1473 Feb 24  2008 syslogd
-r-xr-xr-x  1 root  wheel    277 Feb 24  2008 timed
-r-xr-xr-x  1 root  wheel   2109 Feb 24  2008 tmp
-r-xr-xr-x  1 root  wheel    673 Feb 24  2008 ugidfw
-r-xr-xr-x  1 root  wheel   3147 Feb 24  2008 var
-r-xr-xr-x  1 root  wheel   1610 Feb 24  2008 virecover
-r-xr-xr-x  1 root  wheel   1660 Feb 24  2008 watchdogd
-r-xr-xr-x  1 root  wheel    592 Feb 24  2008 wpa_supplicant
-r-xr-xr-x  1 root  wheel    615 Feb 24  2008 ypbind
-r-xr-xr-x  1 root  wheel    782 Feb 24  2008 yppasswdd
-r-xr-xr-x  1 root  wheel    700 Feb 24  2008 ypserv
-r-xr-xr-x  1 root  wheel    719 Feb 24  2008 ypset
-r-xr-xr-x  1 root  wheel    729 Feb 24  2008 ypupdated
-r-xr-xr-x  1 root  wheel    738 Feb 24  2008 ypxfrd
-r-xr-xr-x  1 root  wheel   1335 Feb 24  2008 zfs
KV_BSD# cd /etc
KV_BSD# more rc.conf

# -- sysinstall generated deltas -- # Sun Oct 19 10:33:42 2008
# Created: Sun Oct 19 10:33:42 2008
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
linux_enable="YES"
# -- sysinstall generated deltas -- # Mon Oct 20 13:28:27 2008
moused_enable="YES"
gdm_enable="YES"
usbd_enable="YES"
defaultrouter="192.168.0.1"
ifconfig_bge0="inet 192.168.0.2 netmask 255.255.255.0"
ntpdate_flags="ntp1.mainecoon.com"
ntpdate_enable="YES"
hostname="KV_BSD"
KV_BSD# vi rc.conf


# -- sysinstall generated deltas -- # Sun Oct 19 10:33:42 2008
# Created: Sun Oct 19 10:33:42 2008
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
linux_enable="YES"
# -- sysinstall generated deltas -- # Mon Oct 20 13:28:27 2008
moused_enable="YES"
gdm_enable="YES"
usbd_enable="YES"
defaultrouter="192.168.0.1"
ifconfig_bge0="inet 192.168.0.2 netmask 255.255.255.0"
ntpdate_flags="ntp1.mainecoon.com"
ntpdate_enable="YES"
hostname="KV_BSD"
################################Soda Guy###############
ifconfig_rum0="ssid AIRBEARS DHCP"
~
~
~
~
~
rc.conf: 18 lines, 674 characters.
KV_BSD# pwd
/etc
KV_BSD# vi rc.d



























^P\xe2^@^@^L^@^D^A.^@^@^@\xc1\xe1^@^@^L^@^D^B..^@^@c\xe2^@^@^P^@^H^FDAEMON^@\xe6
d\xe2^@^@^T^@^H^KFILESYSTEMS^@e\xe2^@^@^P^@^H^ELOGIN^@\xa5\xe6f\xe2^@^@^T^@^H
NETWORKING^@\xe6g\xe2^@^@^P^@^H^GSERVERS^@h\xe2^@^@^L^@^H^Cabi^@i\xe2^@^@^T^@^H
accounting^@\xe6j\xe2^@^@^P^@^H^Gaddswap^@k\xe2^@^@^T^@^H       adjkerntz^@\xa5\
xe6l\xe2^@^@^L^@^H^Camd^@m\xe2^@^@^L^@^H^Capm^@n\xe2^@^@^P^@^H^Dapmd^@k\xa5\xe6o
\xe2^@^@^P^@^H^Garchdep^@p\xe2^@^@^P^@^H^Datm1^@k\xa5\xe6q\xe2^@^@^P^@^H^Datm2^@
k\xa5\xe6r\xe2^@^@^P^@^H^Datm3^@k\xa5\xe6s\xe2^@^@^P^@^H^Fauditd^@\xe6t\xe2^@^@^
X^@^H^Nauto_linklocal^@\xc4u\xe2^@^@^P^@^H^Fbgfsck^@\xe6v\xe2^@^@^T^@^H bluetoot
h^@\xa5\xe6w\xe2^@^@^T^@^H
bootparams^@\xe6x\xe2^@^@^P^@^H^Fbridge^@\xe6y\xe2^@^@^P^@^H^Fbsnmpd^@\xe6z\xe2^
@^@^P^@^H^Fbthidd^@\xe6{\xe2^@^@^L^@^H^Cccd^@|\xe2^@^@^T^@^H^Hcleanvar^@k\xa5\xe
6}\xe2^@^@^T^@^H^Hcleartmp^@k\xa5\xe6~\xe2^@^@^P^@^H^Dcron^@k\xa5\xe6^?\xe2^@^@^
P^@^H^Ddevd^@k\xa5\xe6\x80\xe2^@^@^P^@^H^Edevfs^@\xa5\xe6\x81\xe2^@^@^T^@^H^Hdhc
lient^@k\xa5\xe6\x82\xe2^@^@^P^@^H^Edmesg^@\xa5\xe6\x83\xe2^@^@^P^@^H^Fdumpon^@\
xe6\x84\xe2^@^@^T^@^H^Hearly.sh^@k\xa5\xe6\x85\xe2^@^@^P^@^H^Gencswap^@\x86\xe2^
@^@^P^@^H^Dfsck^@k\xa5\xe6\x87\xe2^@^@^T^@^H    ftp-proxy^@\xa5\xe6\x88\xe2^@^@^
P^@^H^Dftpd^@k\xa5\xe6\x89\xe2^@^@^P^@^H^Dgbde^@k\xa5\xe6\x8a\xe2^@^@^P^@^H^Dgel
i^@k\xa5\xe6\x8b\xe2^@^@^P^@^H^Egeli2^@\xa5\xe6\x8c\xe2^@^@^P^@^H^Fhcsecd^@\xe6\
x8d\xe2^@^@^P^@^H^Ghostapd^@\x8e\xe2^@^@^P^@^H^Fhostid^@\xe6\x8f\xe2^@^@^T^@^H^H
hostname^@k\xa5\xe6\x90\xe2^@^@^P^@^H^Fidmapd^@\xe6\x91\xe2^@^@^P^@^H^Einetd^@\x
a5\xe6\x92\xe2^@^@^T^@^H
initrandom^@\xe6\x93\xe2^@^@^T^@^H
ip6addrctl^@\xe6\x94\xe2^@^@^P^@^H^Eip6fw^@\xa5\xe6\x95\xe2^@^@^T^@^H^Hipfilter^
:q
KV_BSD# /etc/rc.d/netif start
rum0: no link .............. giving up
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 5 (2432 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
KV_BSD# man wpa_cli
WPA_CLI(8)              FreeBSD System Manager's Manual             WPA_CLI(8)

NAME
     wpa_cli -- text-based frontend program for interacting with wpa_suppli-
     cant

SYNOPSIS
     wpa_cli [commands]

DESCRIPTION
     The wpa_cli utility is a text-based frontend program for interacting with
     wpa_supplicant(8).  It is used to query current status, change configura-
     tion, trigger events, and request interactive user input.

     The wpa_cli utility can show the current authentication status, selected
     security mode, dot11 and dot1x MIBs, etc.  In addition, wpa_cli can con-
     figure EAPOL state machine parameters and trigger events such as reasso-
     ciation and IEEE 802.1X logoff/logon.

     The wpa_cli utility provides an interface to supply authentication infor-
     mation such as username and password when it is not provided in the
     wpa_supplicant.conf(5) configuration file.  This can be used, for exam-
     ple, to implement one-time passwords or generic token card authentication
     where the authentication is based on a challenge-response that uses an
     external device for generating the response.

     The wpa_cli utility supports two modes: interactive and command line.
     Both modes share the same command set and the main difference is in
     interactive mode providing access to unsolicited messages (event mes-
     sages, username/password requests).

     Interactive mode is started when wpa_cli is executed without any parame-
     ters on the command line.  Commands are then entered from the controlling
     terminal in response to the wpa_cli prompt.  In command line mode, the
     same commands are entered as command line arguments.

     The control interface of wpa_supplicant(8) can be configured to allow
     non-root user access by using the ctrl_interface_group parameter in the
     wpa_supplicant.conf(5) configuration file.  This makes it possible to run
     wpa_cli with a normal user account.

AUTHENTICATION PARAMETERS
     When wpa_supplicant(8) needs authentication parameters, such as username
     and password, that are not present in the configuration file, it sends a
     request message to all attached frontend programs, e.g., wpa_cli in
     interactive mode.  The wpa_cli utility shows these requests with a
     ``CTRL-REQ-<type>-<id>:<text>'' prefix, where <type> is IDENTITY,
     PASSWORD, or OTP (One-Time Password), <id> is a unique identifier for the
     current network, <text> is a description of the request.  In the case of
     an OTP (One-Time Password) request, it includes the challenge from the
     authentication server.

     A user must supply wpa_supplicant(8) the needed parameters in response to
     these requests.

     For example,

           CTRL-REQ-PASSWORD-1:Password needed for SSID foobar
           > password 1 mysecretpassword

           Example request for generic token card challenge-response:

           CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar
           > otp 2 9876

COMMANDS
     The following commands may be supplied on the command line or at a prompt
     when operating interactively.

     status  Report the current WPA/EAPOL/EAP status for the current inter-
             face.

     mib     Report MIB variables (dot1x, dot11) for the current interface.

     help    Show usage help.

     interface [ifname]
             Show available interfaces and/or set the current interface when
             multiple are available.

     level debug_level
             Change the debugging level in wpa_supplicant(8).  Larger numbers
             generate more messages.
KV_BSD#  



























0
 

Author Comment

by:kayvey
ID: 23110708
                                                                                                                                           KV_BSD# tail -300 ari2
     PASSWORD, or OTP (One-Time Password), <id> is a unique identifier for the
     current network, <text> is a description of the request.  In the case of
     an OTP (One-Time Password) request, it includes the challenge from the
     authentication server.

     A user must supply wpa_supplicant(8) the needed parameters in response to
     these requests.

     For example,

           CTRL-REQ-PASSWORD-1:Password needed for SSID foobar
           > password 1 mysecretpassword

           Example request for generic token card challenge-response:

           CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar
           > otp 2 9876

COMMANDS
     The following commands may be supplied on the command line or at a prompt
     when operating interactively.

     status  Report the current WPA/EAPOL/EAP status for the current inter-
             face.

     mib     Report MIB variables (dot1x, dot11) for the current interface.

     help    Show usage help.

     interface [ifname]
             Show available interfaces and/or set the current interface when
             multiple are available.

     level debug_level
             Change the debugging level in wpa_supplicant(8).  Larger numbers
             generate more messages.

     license
             Display the full license for wpa_cli.

     logoff  Send the IEEE 802.1X EAPOL state machine into the ``logoff''
             state.

     logon   Send the IEEE 802.1X EAPOL state machine into the ``logon''
             state.
KV_BSD# ps aux | grep wpa
root   2120  0.0  0.1  3104   796  p4  S+    2:08PM   0:00.00 wpa_cli
KV_BSD# kill -9 2120
KV_BSD# ifconfig -a
rum0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
      ether 00:1e:e5:ff:6c:66
      media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
      status: no carrier
      ssid AIRBEARS channel 9 (2452 Mhz 11g)
      authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
      bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
      protmode CTS bintval 0
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
      ether 00:11:d8:22:c9:91
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
      media: Ethernet autoselect (none)
      status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      options=8<VLAN_MTU>
      ether 02:e0:18:26:4c:e9
      ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
      lladdr 0.e0.18.0.3.26.4c.e9.a.2.ff.fe.0.0.0.0
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
KV_BSD# ps aux | grep ifconfig
root   2123  0.0  0.1  3116   876  p4  I+    2:09PM   0:00.01 ifconfig rum0 up
KV_BSD# kill -9 2123
KV_BSD# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/rum already exists!
Module uhub/rum failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (600.03-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 1609826304 (1535 MB)
avail memory = 1563754496 (1491 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.ACS_] (Node 0xc4920400), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.AC__._INI] (Node 0xc491fd20), AE_NOT_EXIST
acpi0: Power Button (fixed)
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [ECOR] (0xc491d740) [EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc49203e0), AE_NOT_EXIST
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed [\\_SB_.BAT0._STA] (Node 0xc4924680), AE_NOT_EXIST
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6120d2906000612
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xd0000000-0xd7ffffff,0xff8f0000-0xff8fffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 5 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 10 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffaffc00-0xffafffff irq 10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
rum0: <Cisco-Linksys Compact Wireless-G USB Adapter, class 0/0, rev 2.00/0.01, addr 2> on uhub3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
rum0: Ethernet address: 00:1e:e5:ff:6c:66
rum0: if_start running deferred for Giant
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x3003> mem 0xff9f0000-0xff9fffff irq 4 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:11:d8:22:c9:91
bge0: [ITHREAD]
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
fwohci0: <Ricoh R5C552> mem 0xff9ef800-0xff9effff irq 10 at device 1.2 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:26:4c:e9
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12d4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:26:4c:e9
fwe0: Ethernet address: 02:e0:18:26:4c:e9
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:e0:18:00:03:26:4c:e9 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub1
ums0: 8 buttons and Z dir.
Timecounter "TSC" frequency 600025275 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 114473MB <Hitachi HTS541612J9AT00 SBDOA70H> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TC51> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s2a
drm0: <ATI Radeon RV350 Mobility 9600 M10 NP> on vgapci0
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized radeon 1.25.0 20060524
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
pid 1526 (trackerd), uid 1001: exited on signal 11 (core dumped)
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
KV_BSD# ps aux | grep ifcon
root   2316  0.0  0.1  3116   876  p4  I+    2:14PM   0:00.01 ifconfig rum0 up
KV_BSD# kill -9 2316
KV_BSD# #                                                                                                                                                  KV_BSD#



























0
 

Author Comment

by:kayvey
ID: 23110713
hmm.. that guy's a .. heh  {:}  well.. what did he say, "staff" at Berkeley.. he isn't doing much we weren't
already right?
0
 
LVL 62

Expert Comment

by:gheist
ID: 23112912
Now that FreeBSD sees your wireless adapter I do not see any productive further development in this question.
0
 

Author Comment

by:kayvey
ID: 23117473
It didn't work at airbears.  That was the point of the project.  What good is seeing it if it doesn't work.

The semester is almost done.  I agree that this is a great stride seeing it.  I am running FreeBSD now, but doing some other things.  Later today I will try to install rum0 into kernel.  If there are problems with that I will ask.  If we don't successfully make it work at airbears and the semester ends I will give you points for seeing rum0

I am home now, so I can't test it at airbears.
0
 

Author Comment

by:kayvey
ID: 23117481
well.. I am noticing I do say "see" in the title.  If it will make you happy I will give you points and ask a new
question then.  Will that make you happy, or will you complain it isn't an appropriate giving of points?
0
 

Author Comment

by:kayvey
ID: 23126986
Okay Maybe I should give you points now.
0
 

Author Closing Comment

by:kayvey
ID: 31517201
I thought I already gave you these points!
0

Featured Post

Concerto Cloud for Software Providers & ISVs

Can Concerto Cloud Services help you focus on evolving your application offerings, while delivering the best cloud experience to your customers? From DevOps to revenue models and customer support, the answer is yes!

Learn how Concerto can help you.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Today sees the launch of a new case study, focusing on BYOD technologies we have been working with for some time now.  But with the advent of 802.11ac wireless technologies and the story behind our landmark developments, we would like to share this …
DECT technology has become a popular standard for wireless voice communication. DECT devices are not likely to be affected by other electronic devices and signals because they operate in a separate frequency-band.
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
This video shows how to set up a shell script to accept a positional parameter when called, pass that to a SQL script, accept the output from the statement back and then manipulate it in the Shell.
Suggested Courses

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question