How can I use an ATAPI Rev drive with a motherboard that has only SATA connectors?

Posted on 2008-11-16
Last Modified: 2013-11-14
I have an Iomega ATAPI Rev drive that I want to transfer to a computer that has only SATA connectors on the motherboard.   How can I do this?
Question by:DoctorK12008
    LVL 13

    Expert Comment

    you could buy a adapter card
    LVL 13

    Accepted Solution

    this would work
    or something like this
    just a cheap addon card that goes into a PCI slot
    LVL 47

    Expert Comment

    Does it have a USB connector on it?

    Some of them do.  If so you could connect it to a USB port and transfer the data that way.

    If not you could get a USB hard disk enclosure and place it in that, connect up to USB and transfer that way.  Keep the enclosure open, you won't need to close it up.

    Featured Post

    Why You Should Analyze Threat Actor TTPs

    After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

    Join & Write a Comment

    Suggested Solutions

    Title # Comments Views Activity
    aws s3 access over vpn only 4 45
    good comptia a+ teacher? 4 51
    Tape Management 8 34
    Difference between HP monitors 3 22
    Does your iMac really need a hardware upgrade? Will upgrading RAM speed-up your computer? If yes, then how can you proceed? Upgrading RAM in your iMac is not as simple as it may seem. This article will help you in getting and installing right RA…
    Create your own, high-performance VM backup appliance by installing NAKIVO Backup & Replication directly onto a Synology NAS!
    This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
    This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

    728 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    15 Experts available now in Live!

    Get 1:1 Help Now