1:1 NAT possible? Quick answer / discussion

I'm using a D-Link DFL-800 firewall, but understand that it contains mainly of a Clavister operating system. I have a really hurrying problem that hanged over me for two month. On thursday is the D Day. The first question, before I filling up this topic with hundreds of specifications, does DFL-800 make this type of connection (1:1 NAT) work at all?

Thank's in advanced and for a very quick respons.
LVL 1
dingirAsked:
Who is Participating?
 
Rob WilliamsConnect With a Mentor Commented:
Yes the DFL-800 supports 1:1 NAT. NAT configurations are discussed in section 7 of the manual:
ftp://ftp.dlink.com/Gateway/dfl800/Manual/NetDefend_OS_User_Manual_107.zip
0
 
dingirAuthor Commented:
Thank's for answer. That was not much of help. I've got an external ip-network that should be used internally in my 192.168.x.x network. But I solved it with the dfl-800 together with a vlan-strategy (because it needed a gateway ip) and a transport that sets the gateway as senders ip instead of the dfl-800 interface.
0
 
Rob WilliamsCommented:
>>"That was not much of help."
Sorry you feel that way. Your question was; "The first question, before I filling up this topic with hundreds of specifications, does DFL-800 make this type of connection (1:1 NAT) work at all? "
The answer is yes, the rest was just a bonus :-)
Cheers !
--Rob
0
Protect Your Employees from Wi-Fi Threats

As Wi-Fi growth and popularity continues to climb, not everyone understands the risks that come with connecting to public Wi-Fi or even offering Wi-Fi to employees, visitors and guests. Download the resource kit to make sure your safe wherever business takes you!

 
dingirAuthor Commented:
Lol.

I understand that, but I solved the whole case and i'm not sure how this thread would help anyone else. But for you, there is an correct and accurate answer. Sorry :-).
0
 
Rob WilliamsCommented:
Thanks dingir. Sorry to be difficult. Where it said "Quick answer " I was just going to put yes, but felt guilty doing that :-)
Thanks again,
--Rob
0
 
dingirAuthor Commented:
It's fully okay. I don't earn any money or knowledge on following this up any more :-). My ambition was to ask several follow-ups, but I founded the solution before. Because the manual wasn't of much help in this very scenario.

Public IP 1, Internal network
GW Public IP 2
 |
 |
DFL800 ROUTER
 |
Gateway Public IP 3
Public IP 3, internal network

This would NEVER worked without setting up the new VLAN (as public ip 3 gw) with an attached VLAN-Switch (because DFL-800 ports are bridged, they can't be tagged), because this dfl800-router already being used for other applications on a private 192.168.x.x network. Also both DMZ and WAN1&WAN2 being used for other applications :).
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.