Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

error 691 when trying to start Routing and remote access

Posted on 2008-11-17
1
Medium Priority
?
449 Views
Last Modified: 2012-05-05
Everything was working fine and now all of a sudden my routing and remote access wil not start and I get a 691 error message saying the username and password is not correct.
0
Comment
Question by:jmahlmann
1 Comment
 
LVL 32

Accepted Solution

by:
harbor235 earned 1500 total points
ID: 22986673
Here you go

http://support.microsoft.com/kb/826157

harbor235 ;}
0

Featured Post

Prepare for your VMware VCP6-DCV exam.

Josh Coen and Jason Langer have prepared the latest edition of VCP study guide. Both authors have been working in the IT field for more than a decade, and both hold VMware certifications. This 163-page guide covers all 10 of the exam blueprint sections.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…

579 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question