Switch HP procurve 3400cl J4905A

how to administrate by web administration
MarDNTAsked:
Who is Participating?
 
marinus_nlConnect With a Mentor Commented:
Hi,

As soon as the ProCurve switch is assigned an IP address and your management station is in the same subnet range, check if your PC gets Ping (ICMP) replies from the ProCurve switch's IP address you assigned previously.

If that is succesful, then you can open MSIE or Firefox and "browse" to the switch's IP address. Note that you may need to change how your browser's proxy is configured. If you do have a corporate proxy configured, then normally "Direct access to the Internet" on your browser should suffice for web access to the switch.

Hope this helps.

Best regards,
Marinus
0
 
KeNt_UACommented:
does your know his ip address?
can you connect via serial console?
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.