<div>
What type of switches do you have?<br />
For the commands on the switchs you can type a question mark to get help and on the ASN type help to see the list of commands. They are also documented in the CLI reference manuals for the various switches on the Nortel website. For the ASN they call it the technician interface.
</div>


What type of switches do you have?
For the commands on the switchs you can type a question mark to get help and on the ASN type help to see the list of commands. They are also documented in the CLI reference manuals for the various switches on the Nortel website. For the ASN they call it the technician interface.

<div>
Bay Stack 420-24 T<br />
<br />
What I want do is enable telnet check vlan and fiber module on switch<br />

</div>


Bay Stack 420-24 T

What I want do is enable telnet check vlan and fiber module on switch


<div>
Thanks <br />
I opened another question about Nortel Device Manager Gives error when assigning ports to different vlans on passport 8006 maybe you should give it a try no one did yet
</div>


Thanks
I opened another question about Nortel Device Manager Gives error when assigning ports to different vlans on passport 8006 maybe you should give it a try no one did yet

<div>
<div class="content wysiwyg-content">
What is circuit ip on Nortel switch and where can I find list of commands for Nortel switch and ASN
</div>
</div>


What is circuit ip on Nortel switch and where can I find list of commands for Nortel switch and ASN

What is circuit ip on Nortel Switch?

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.