jaygriz
asked on
Smart Media Card Insertion
I bought some used Smart Cards for use in my Roland XP-30 keyboard. When I insert it (apparently as far as it will go), and try to format it, I get this message "Memory Card not Ready." See the attached pic . . . Do I have it in the right way??
IMG00018.jpg
IMG00018.jpg
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
http://home.arcor.de/chevere/Roland_XP-30_Manual.pdf
page 67:
Before a memory card can be used, it must be formatted (p.
122).
* Either S2M-5 or S4M-5 memory cards can be used.
Memory cards are not included, but may be purchased from
your dealer.
page 67:
Before a memory card can be used, it must be formatted (p.
122).
* Either S2M-5 or S4M-5 memory cards can be used.
Memory cards are not included, but may be purchased from
your dealer.
ASKER
Thanks f-king. I was using 3.3V cards. Dagnabbit! The 5 Volt/4MB one ones are selling for a small fortune on eBay ($80).
I think you might need an adapter that attaches to the smart card and then connect to the keyboard did you get one ?