bankimj
asked on
2950 running on Standard image even if flash has enhanced image
Cisco 2950 - 24
IOS file on sh flash - 2950-i6q412-mz.121-22.EA2. bin
On sh ver
....
running standard image
Why so?
IOS file on sh flash - 2950-i6q412-mz.121-22.EA2.
On sh ver
....
running standard image
Why so?
ASKER
Tried that...
On reboot it tells...
error loading 2950-i6q412-mz.121-22.EA2. bin..
...
booting continues...
and again standard image is loaded.
On reboot it tells...
error loading 2950-i6q412-mz.121-22.EA2.
...
booting continues...
and again standard image is loaded.
check below options
- it is wrong image for hardware
- image is corrupt
- it is wrong image for hardware
- image is corrupt
ASKER
Cisco site tells this image is ok for 2950.
If it's corrupt then wont switch give any problems?
If it's corrupt then wont switch give any problems?
below image has problem.
2950-i6q412-mz.121-22.EA2. bin
2950-i6q412-mz.121-22.EA2.
ASKER
ok. So what should I do? Kindly help.
you need to find correct image.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
boot system flash 2950-i6q412-mz.121-22.EA2.