I am attempting an initial installation on a Sun Netra V240. The Install script indicates that the two SCSI disk drives have a Corrupt Label (i.e.):
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):
Corrupt label; wrong magic n
The installation from DVD continues:
The Solaris Installer can be run in English, or any of the following languages:
1) English 6) Japanese
2) German 7) Korean
3) Spanish 8) Swedish
4) French 9) Simplified_Chinese
5) Italian 10) Traditional_Chinese
Select the language you want to use to run the installer: 1
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
Scanning system disk information...
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@0
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
Searching disks for upgradable Solaris root devices...
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):
Corrupt label; wr
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
No Upgradable Solaris root devices were found.
Searching for locations to accommodate a temporary copy of the Solaris
installation software. Swap slices are usually erased at reboot, so it is
preferable to place the Solaris installation software on slice labeled swap.
No swap slices that begin at the first usable cylinder have enough space
to accommodate a temporary copy of the Solaris installation software.
Using a slice that begins at the first usable cylinder allows the most
flexibility during filesystem layout. If you are doing an initial install and
you are not preserving any filesystems, you can re-partition a disk with the
swap slice starting at the first usable cylinder.
Would you like to re-partition a disk? [y,n,?,q] y
No Hard disks found on the system.
Please see your install documentation.
Exiting to shell
# WARNING: Power off requested from power button or SC, powering down the system
!
INITSH: /sbin/shutdown: not found
SC Alert: Host system has shut down.
SC Alert: CRITICAL ALARM is set
ALOM BOOTMON v1.6.6
ALOM Build Release: 001
Reset register: e0000000 EHRS ESRS LLRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Memory Parity Test
Memory Parity Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
SC Alert: Host System has Reset
SC Alert: CRITICAL ALARM is set
SC Alert: CRITICAL ALARM is set
Sun(tm) Advanced Lights Out Manager 1.6.6 (FV240-hn51141743)
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: TUE JAN 06 15:35:25 2009
Wait, 1 - 3 seconds
Read the TOD Clock: TUE JAN 06 15:35:27 2009
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's. Attaching network interface cpm0... d
one.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - -
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC850 - - PASSED
Enter #. to return to ALOM.
SC Alert: SC System booted.
Done
0>Interrupt Crosscall....Done
0>Init Memory....\
SC Alert: Input power unavailable for PSU @ PS1.
Done
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory....Done
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
SC Alert: Host System has Reset
SC Alert: CRITICAL ALARM is set
Configuring system memory & CPU(s)
Probing system devices
Probing memory
Probing I/O buses
Netra 240, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights res
OpenBoot 4.22.28, 2048 MB memory installed, Serial #60880177.
Ethernet address 0:3:ba:a0:f5:31, Host ID: 83a0f531.
Running diagnostic script obdiag/normal
Testing /pci@1e,600000/ide@d
Testing /pci@1e,600000/isa@7/rtc@0,70
Testing /pci@1c,600000/scsi@2
Testing /pci@1c,600000/scsi@2,1
Testing /pci@1e,600000/isa@7/serial@0,2e8
Testing /pci@1e,600000/isa@7/serial@0,3f8
Probing system devices
Probing memory
Probing I/O buses
Netra 240, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.28, 2048 MB memory installed, Serial #60880177.
Ethernet address 0:3:ba:a0:f5:31, Host ID: 83a0f531.
Rebooting with command: boot
Bad magic number in disk label
Can't open disk label package
Boot device: net File and args:
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Evaluating:
Can't open bo
{1} ok boot cdrom - nowin
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args: - nowin
SunOS Release 5.9 Version Generic_118558-34 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):
Corrupt label; wrong magic number
Hardware watchdog enabled
Configuring /dev and /devices
Using RPC Bootparams for network configur
Skipping interface bge3
Skipping interface bge2
Skipping interface bge1
Skipping interface bge0
Searching for configuration file(s)...
Search complete.
The Solaris Installer can be run in English, or any of the following languages:
1) English 6) Japanese
2) German 7) Korean
3) Spanish 8) Swedish
4) French 9) Simplified_Chinese
5) Italian 10) Traditional_Chinese
Select the language you want to use to run the installer: 1
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
/
Scanning system disk information...
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wr
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
Corrupt label; wrong magic number
How do I get these drives in a usable state for the installation?