troubleshooting Question

How do I configure the Watchguard Optional Interface?

Avatar of Rick Barwig
Rick BarwigFlag for United States of America asked on
Software Firewalls
16 Comments1 Solution1895 ViewsLast Modified:
I have two x1000 fireboxes, one at my office and one at a client.  The one at my office I have the optional interface configured to allow guests to get out to the internet, works fine.   I have the one at the client configured the same way, but it will not allow the client to get to the internet.  I can the ping the gateway of the otional interface and it will show up in the traffic log, but no other traffic will show up.  The firmware levels are the same (7.5), the system manager software (10.2) being used is the same.  I have even tried to create a minimum config for the second x1000, wrote it out to the device, but it still did not allow traffic out to the internet.  Does anyone have any idea as to what I may be overlooking?  
Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 1 Answer and 16 Comments.
Join the Community
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 16 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros