troubleshooting Question

ASA 5510 with SSM-10 IPS module

Avatar of dwarner8
dwarner8Flag for United States of America asked on
SoftwareHardware FirewallsNetworking Hardware-Other
1 Comment1 Solution881 ViewsLast Modified:
I have an ASA 5510 running 7.06 due to certain restrictions. My external interface is 10.1.x.x, the internal is 176.16.x.x, and the management is still default at 192.168.1.1.

the IPS module is still in its default IP of 192.168.1.2

I would like to put the management IP of the firewall and IPS on the same subnet so I can manage them from the ADSM.

I would also like to monitor and divert traffic from the outside interface to the IPS module for inspection. What IP address should the IPS have, should it be on the inside lan or have an address on the outside interface? Kinda new to ASA devices.

Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 1 Answer and 1 Comment.
Join the Community
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 1 Comment.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros