troubleshooting Question

VPN client issues with new ASA5510 setup

Avatar of patsom
patsom asked on
VPN
7 Comments1 Solution444 ViewsLast Modified:
I just set up a new ASA5510 for a VPN remote client solution a, VPN tunnels to a partner connection, and GRE tunnels to remote site to site locations. Unfortunately, none of them appear to be working. I'd like to start with getting the remote access working.  I receive the following errors in the logs. I can't find how to get to a different group policy in the client. (V5.0)
I've attached my config below and removed the partners IP addresses.

Any help would be appreciated.
%ASA-6-302015: Built inbound UDP connection 13320 for outside:71.187.172.46/2133
 (71.187.172.46/2133) to NP Identity Ifc:12.237.100.3/500 (12.237.100.3/500)
%ASA-3-713902: Group = DefaultRAGroup, IP = 71.187.172.46, Removing peer from pe
er table failed, no match!
%ASA-4-713903: Group = DefaultRAGroup, IP = 71.187.172.46, Error: Unable to remo
ve PeerTblEntry
vcfexchange-0107.txt
Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 1 Answer and 7 Comments.
Join the Community
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 7 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros