sunhux
asked on
Enable Cisco router's logging as "show log" showed nothing
Hi,
When we issued "show log" nothing was shown.
What's the commands that we need to enter to enable back logging so
that when there's link/adjacency up/down, "show log" would log the
incidents.
Anyway we can specify how days or how many MBytes of logs to keep
besides redirecting it to a syslog server?
When we issued "show log" nothing was shown.
What's the commands that we need to enter to enable back logging so
that when there's link/adjacency up/down, "show log" would log the
incidents.
Anyway we can specify how days or how many MBytes of logs to keep
besides redirecting it to a syslog server?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.