zenworksb
asked on
new sbs 2008 install slow
i had a engineer install a new sbs 2008 running exchange 2007 and after a reboot the server and network and everything is fast for about 20min then everything slows down i know there is not allot of info here just need a push in the right diorection to start troubleshooting thanks guys
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
i see this
Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005. This is often caused by incorrect security settings in either the writer or requestor process.
Operation:
Gathering Writer Data
Context:
Writer Class Id: {35e81631-13e1-48db-97fc-d 5bc721bb18 a}
Writer Name: NPS VSS Writer
Writer Instance ID: {09c188aa-a879-4506-b6b4-e 214df82547 1}
network threat protection was on in endpoint I disabled that so that could have been it
Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005. This is often caused by incorrect security settings in either the writer or requestor process.
Operation:
Gathering Writer Data
Context:
Writer Class Id: {35e81631-13e1-48db-97fc-d
Writer Name: NPS VSS Writer
Writer Instance ID: {09c188aa-a879-4506-b6b4-e
network threat protection was on in endpoint I disabled that so that could have been it
ASKER
i see this to
A transient failure has occurred. The problem may resolve itself in awhile. The service will retry in 56 seconds. Diagnostic information:
A transient failure has occurred. The problem may resolve itself in awhile. The service will retry in 56 seconds. Diagnostic information:
ASKER
see this
No DNS servers could be retrieved from network adapter 7cafadc3-aebb-4d49-a461-a9 6897a827a3 . Verify that the computer is connected to a network and that the Get-NetworkConnectionInfo cmdlet returns results.
but ran the command and retrieved results
No DNS servers could be retrieved from network adapter 7cafadc3-aebb-4d49-a461-a9
but ran the command and retrieved results
ASKER
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{61738644-F196-11D0-9953-0 0C04FD919C 1}
{61738644-F196-11D0-9953-0
ASKER