<div>
Your best option may be to run a custom tcl script<br />
<a href="http://www.netcraftsmen.net/welcher/papers/iostcl01.html" rel="ugc">http://www.netcraftsmen.net/welcher/papers/iostcl01.html</a><br />
<a href="http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gt_tcl.html" rel="ugc">http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gt_tcl.html</a><br />

</div>


Your best option may be to run a custom tcl script
http://www.netcraftsmen.net/welcher/papers/iostcl01.html [http://www.netcraftsmen.net/welcher/papers/iostcl01.html]
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gt_tcl.html [http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gt_tcl.html]


<div>
<div class="content wysiwyg-content">
Hey guys,<br />
<br />
Okay here is the problem. I have two Cisco 7301 routers both run into a 3550 switch to two vlans.. one is on and the other has its three ports on the switch in shutdown mode. <br />
Basically what i want is if the switch (its a layer 3 switch) IOS12.X detects a port go down on the ONLINE router.. to shut its three ports down and bring up the back three ports for the secondary router..<br />
<br />
Any suggestions?<br />

</div>
</div>


Hey guys,

Okay here is the problem. I have two Cisco 7301 routers both run into a 3550 switch to two vlans.. one is on and the other has its three ports on the switch in shutdown mode. 
Basically what i want is if the switch (its a layer 3 switch) IOS12.X detects a port go down on the ONLINE router.. to shut its three ports down and bring up the back three ports for the secondary router..

Any suggestions?


Cisco Port redundancy problem

The term broadband commonly refers to high-speed Internet access that is always on and faster than the traditional dial-up access. Broadband includes several high-speed transmission technologies such as digital subscriber line (DSL), cable, fiber optics, wireless (for which there is a separate topic), satellite and broadband over powerlines (BPL).

Broadband

Networking software modules are interfaced with a framework implemented on the machine's operating system that implements the networking functionality of the operating system. The best known frameworks are the TCP/IP model and the OSI model. Systems typically do not use a single protocol to handle a transmission. Instead they use a set of cooperating protocols, sometimes called a protocol family or protocol suite.[9] Some of the best known protocol suites include: IPX/SPX, X.25, AX.25, AppleTalk and TCP/IP. Other protocols indirectly related to networking include the hypertext transfer protocol (HTTP) and its related technologies, Dynamic Host Configuration Protocol (DHCP), Domain Name Server (DNS) and other Internet protocols.

Networking Protocols

Networking hardware includes the physical devices facilitating the use of a computer network. Typically, networking hardware includes gateways, routers, network bridges, modems, wireless access points, networking cables, line drivers, switches, hubs, and repeaters. But it also includes hybrid network devices such as multilayer switches, protocol converters, bridge routers, proxy servers, firewalls, network address translators, multiplexers, network interface controllers, wireless network interface controllers, ISDN terminal adapters and other related hardware.