cisco 2620 vpn users?

Posted on 2009-02-09
Last Modified: 2012-06-27
a previous member of staff has setup some vpn accounts to connect to our office network. i recall him saying that this was dont on the cisco box. I have looked on the cisco website and there is mention of a cisco anyconnect client download.

is there anyway i can view users that have been setup and any connection logs for any of the users, just so i can see who has connected and from what ip address??
Question by:therob1
    LVL 79

    Expert Comment

    On the router:

    router#show crypto isakmp sa

    This will show you all the connected vpn's and what their IP address is.

    Author Comment

    when entering the command i get the following error message, also after entering ENABLE it doesnt prompt for a password?

    Howells_HQ#show crypto isakmp sa
    % Invalid input detected at '^' marker.

    LVL 79

    Expert Comment

    How about "show version"

    Author Comment

    ok that appeared to work, but doesnt show me any users or logs?

    Cisco Internetwork Operating System Software
    IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(13)T,  RELEASE SOFTWARE (fc1)

    TAC Support:
    Copyright (c) 1986-2002 by cisco Systems, Inc.
    Compiled Sat 16-Nov-02 23:00 by ccai
    Image text-base: 0x80008098, data-base: 0x8183511C

    ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

    Howells_HQ uptime is 1 day, 3 hours, 37 minutes
    System returned to ROM by power-on
    System restarted at 10:21:28 UTC Mon Feb 9 2009
    System image file is "flash:c2600-is-mz.122-13.T.bin"

    cisco 2620 (MPC860) processor (revision 0x101) with 60416K/5120K bytes of memory
    Processor board ID JAB040203YN (4059239370)
    M860 processor: part number 0, mask 49
    Bridging software.
    X.25 software, Version 3.0.0.
    1 FastEthernet/IEEE 802.3 interface(s)
    4 ATM network interface(s)
    32K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102
    LVL 79

    Accepted Solution

    This is what I wanted to see. The reason that the first command did not work is because this feature set does not support IPSEC.
    "sho run | include user" will show you a list of usernames
    Can you post complete "show run" ? Edit out only part of the public IP address and any passwords.

    Author Closing Comment

    your help was greatly appreciated

    Featured Post

    Maximize Your Threat Intelligence Reporting

    Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

    Join & Write a Comment

    This article assumes you have at least one Cisco ASA or PIX configured with working internet and a non-dynamic, public, address on the outside interface. If you need instructions on how to enable your device for internet, or basic configuration info…
    Have you experienced traffic destined through a Cisco ASA firewall disappears and you do not know if the traffic stops in the firewall or somewhere else? The solution is the capture feature. This feature was released in 6.2(1) and works in all firew…
    After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
    After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

    732 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    20 Experts available now in Live!

    Get 1:1 Help Now