• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1564
  • Last Modified:

EVA 8000 Storage Port Queue Request Maximum HSV210

What is the maximum Storage Port Queue Request Count for HSV210 controllers on a standard 8 port config EVA 8000?  I need this value to plug into the VMware and HP referenced Qlogic Execution throttle equation which statest this value should be greater than [(# of Storage Ports) * (Port Max Queue Count)] / [HBAs on all Hosts accessing EVA].

1 Solution
Duncan MeyersCommented:
Google has not beed a lot of help on this one. I think you;ll need to put that question to HP Support.
andyalderSaggar makers bottom knockerCommented:
Tunable parameters should be listed under the host and storage system rules chapter 3 of HP's SAN design guide found at http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=12169&prodSeriesId=470490
tc100yearsAuthor Commented:
I just read through the entire chapter but still find nothing on the storage port queue max...to be clear, I don't need to change this value, I just need to know what the standard/default/recommended/current value is for an EVA 8000 to plug into this equation referenced in HP, Qlogic and VMware documentation:

[(# of Storage Ports) * (Port Max Queue Count)] / [HBAs on all Hosts accessing EVA]  < = Qlogic BIOS Execution Throttle setting



Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now