[Last Call] Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

ASA Vpn Client connects, but can't ping, rdp or anything

Posted on 2009-02-10
3
Medium Priority
?
1,135 Views
Last Modified: 2012-05-06
ASA Vpn Client connects, but can't ping, rdp or anything
ASA 5505 7.2(4)

Open in new window

0
Comment
Question by:ThieV
3 Comments
 
LVL 33

Expert Comment

by:MikeKane
ID: 23611469
We would need to see the entire config to diagnose.  

Start with this Cisco step by step as an example.  
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
0
 
LVL 9

Expert Comment

by:Donboo
ID: 23616026
I would guess it might be your No-Nat acl that is missing, usually the problem, but really cant be sure so do as Mike says and post your config for us to troubleshoot.
0
 

Accepted Solution

by:
ThieV earned 0 total points
ID: 23655446
I figured it out.  I was missing this command "crypto isakmp nat-traversal  30".  If the user is behind many NAT/PAT, Cisco recommend adding this command.

Thanks

TV
0

Featured Post

Important Lessons on Recovering from Petya

In their most recent webinar, Skyport Systems explores ways to isolate and protect critical databases to keep the core of your company safe from harm.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I've had to do a bit of research to setup my VPN connection so that Clients can access Windows Server 2008 network shares.  I have a Cisco ASA 5510 firewall.  I found an article which was extremely useful: It had a solution if you use ASDM to config…
If you’re involved with your company’s wide area network (WAN), you’ve probably heard about SD-WANs. They’re the “boy wonder” of networking, ostensibly allowing companies to replace expensive MPLS lines with low-cost Internet access. But, are they …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question