• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1130
  • Last Modified:

OWA Stopped Working

Hello,
I recently started having a problem accessing OWA on my Server.  When I try to open OWA, I receive a message that the page cannot be displayed.
Last week the priv1.edb database was moved from the C: drive to the E drive, could this be causing the problem?
0
paulvi
Asked:
paulvi
  • 11
  • 7
  • 6
  • +1
2 Solutions
 
suppsawsCommented:
normally not, if you folowed the correct move procedure:
http://www.microsoft.com/downloads/details.aspx?familyid=a1d0af69-1287-4225-bd8b-59c89f44984b&displaylang=en

are you trying to open owa internally or externally?
btw, start with rerunning the 'connect to the internet wizard' first.
0
 
Hypercat (Deb)Commented:
Moving the database, assuming it was done properly, would not cause any problems with OWA.  If Exchange is running properly, then it can connect to the database, which means that it was moved properly and there are no problems with that change.
I would try rerunning the CEICW - tell it not to change anything in your email setup, be re-do the web site portion of the setup and see if that fixes your problem.
0
 
paulviAuthor Commented:
Hello

Thank you for responding so quickly.  I did follow the procedure in the KB article, but just wanted to rule out a chance of that having caused the problem.

Hypercat: I tried running the CEICW tool and it errors out at the mail configuration.  
n error occured while configuring a component.
To continue with the wizard and configure remaining components, click ok.
To end the wizard without configuring the remaining components, click cancel.
I click ok and nothing else happens

0
Microsoft Certification Exam 74-409

VeeamĀ® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

 
suppsawsCommented:
paste us the errors of the log please:
http://sbs.editme.com/logs   >> Internet Connection Wizard (CEICW) logs:      %SBSPROGRAMDIR%\Support\icwlog.txt
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
You would need to look at the CEICW's log file to see what the error is.
C:\Program Files\Microsoft Windows Small Business Server\Support\icwlog.txt

But I'd suspect that the problem is that your Default Web Site isn't running.

Jeff
TechSoEasy
0
 
paulviAuthor Commented:
2/11/2009 3:23 PM
c:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
calling CRFireCommit::ValidatePropertyBag (0x25cc20).
Call to This is a Router Single Nic configuration only Web Publishing will be configured, Basic Firewall will not be configured. () returned ok.
Call to Reading web publishing selection () returned ok.
Call to Reading OWA publishing selection () returned ok.
Call to Reading RUP publishing selection () returned ok.
Call to Reading Monitoring publishing selection () returned ok.
Call to Reading OMA publishing selection () returned ok.
Call to Reading RPC publishing selection () returned ok.
Call to Reading Companyweb publishing selection () returned ok.
Call to Reading ROOT publishing selection () returned ok.
Web publishing selections:
OWA publishing: 1
RUP publishing: 0
Monitoring publishing: 1
OMA publishing: 1
RPC publishing: 1
Companyweb publishing: 0
ROOT publishing: 1
Call to CRFireCommit::ValidatePropertyBag () returned ok.

2/11/2009 3:23 PM
c:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizcert.dll, version 5.2.2893.0
Calling CCertCommit::ValidatePropertyBag
Require SSL for OWA: 1
Require SSL for Remote Portal: 1
Require SSL for Monitoring: 0
Require SSL for OMA: 0
Require SSL for CompanyWeb: 0
Require 128 Bit Encryption: 1
Cert selection: -1
CCertCommit::ValidatePropertyBag returned OK

2/11/2009 3:23 PM
c:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizemail.dll, version 5.2.2893.0
calling CEmailCommit::ValidatePropertyBag ().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6e50c).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x25cc20, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
calling ReadBool (0x25cc20, F71526DD-9C19-4fe9-B7DB-FD4360909275).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cc20, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadBool () returned ok.
The out param of ReadBool() is 0.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cc20, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadInt4 (0x25cc20, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyLong ().
Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
calling ReadString (0x25cc20, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is heritageleaders.com.
calling ReadBool (0x25cc20, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling ReadInt4 (0x25cc20, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyHostName ().
Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
calling AttachCommiter.Validate(pPPPBag) (0x25cc20, 01637C90-B142-41C4-8520-6B2E0F891BE7).
calling CAttachCommiter::Validate (0x25cc20).
calling CAttachCommiter::Validate:ReadVariant (0x0).
calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
Call to CAttachCommiter::Validate () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling CNetCommit::Commit (2477088).
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Property bag is not dirty, skipping validation
calling CNetCommit::Common ().
calling CNetCommit::GetLanNicInfo ().
LAN NIC Guid: {382C8308-00FD-4BAD-BD8A-CD2176F732A4}
Call to Converting LAN NIC Guid () returned ok.
Call to Getting IP address for the LAN NIC () returned ok.
Call to Reading in the LAN NIC info () returned ok.
Call to Fixing the TCP/IP NIC Binding order () returned ok.
Dhcp server is installed and not disabled
Call to Set DHCP Server to start up automatically () returned ok.
DNS server is installed and not disabled
Call to Changing startup type for DNS () returned ok.
Call to Clearing DNS server entries on the LAN NIC () returned ok.
Call to Setting DNS server IP for the LAN NIC () returned ok.
Call to Resetting DNS recursion timeout () returned ok.
Call to Resetting client dns query timouts in config.dat () returned ok.
Call to DsGetDcName for local domain name () returned ok.
Call to Disabling RRAS routing () returned ok.
calling CNetCommit::DoRouter ().
Call to Clearing the default gateway on the LAN NIC () returned ok.
Call to Setting default gateway on the LAN NIC () returned ok.
Call to Setting DNS forwarders () returned ok.
Call to Preparing DNS for DNS listener reset () returned ok.
Call to Resetting DNS listeners () returned ok.
URL to the router is http://192.168.1.1
Call to Adding routers IP address to the intranet zone () returned ok.
Call to CNetCommit::DoRouter () returned ok.
Call to Configuring for router connection () returned ok.
calling ConfigureIE ().
calling SetInternetOptions ((null), (null), (null)).
calling InternetSetOptionA (NULL, INTERNET_OPTION_PER_CONNECTION_OPTION).
Call to InternetSetOptionA () returned ok.
Call to SetInternetOptions () returned ok.
calling InternetSetOption_AutodialConnection ().
Call to InternetSetOption_AutodialConnection () returned ok.
calling InternetSetOption_AutodialMode (4).
Call to InternetSetOption_AutodialMode () returned ok.
calling InternetSetOption_DisableAutodial (0).
Call to InternetSetOption_DisableAutodial () returned ok.
Call to ConfigureIE () returned ok.
Call to Configuring IE for router connection () returned ok.
Call to Notifying client setup for Default gateway as the router () returned ok.
calling RegisterMSBOExchangeBP (0).
Error 0x1 returned from call to RegisterMSBOExchangeBP().
Call to Unregistering the smtp sink () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Reading in the local domain name () returned ok.
Local Domain Name is: hpi.local
Call to Enabling secure dynamic DNS updates () returned ok.
Call to Disabling RoundRobin for DNS server () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Configuring DHCP options () returned ok.
Call to Disabling the RASUTO service () returned ok.
Call to Configuring w32time parameters for fulltime () returned ok.
Call to Configuring the time service () returned ok.
Call to Notifying RWW for ISA () returned ok.
Call to CNetCommit::Common () returned ok.
Call to CNetCommit::Commit () returned ok.
calling CRFireCommit::CommitEx (0x25cc20).
calling CRFireCommit::ValidatePropertyBag (0x25cc20).
Call to This is a Router Single Nic configuration only Web Publishing will be configured, Basic Firewall will not be configured. () returned ok.
Call to Reading web publishing selection () returned ok.
Call to Reading OWA publishing selection () returned ok.
Call to Reading RUP publishing selection () returned ok.
Call to Reading Monitoring publishing selection () returned ok.
Call to Reading OMA publishing selection () returned ok.
Call to Reading RPC publishing selection () returned ok.
Call to Reading Companyweb publishing selection () returned ok.
Call to Reading ROOT publishing selection () returned ok.
Web publishing selections:
OWA publishing: 1
RUP publishing: 0
Monitoring publishing: 1
OMA publishing: 1
RPC publishing: 1
Companyweb publishing: 0
ROOT publishing: 1
Call to CRFireCommit::ValidatePropertyBag () returned ok.
Call to GetPrivateNICGuid () returned ok.
Call to GetIPAddress for private nic () returned ok.
Call to GetSubnetMask for private nic () returned ok.
RUP is not published
Call to Fixing the inheritance for root dir () returned ok.
Call to Unpublishing the default web site () returned ok.
Call to Fixing the inheritance for companyweb dir () returned ok.
Call to Unpublishing companyweb () returned ok.
Call to Publishing root () returned ok.
Call to Publishing /Exchange () returned ok.
Call to Publishing /ExchWeb () returned ok.
Call to Publishing /Public () returned ok.
Call to Publishing /ExAdmin () returned ok.
Call to Publishing Monitoring () returned ok.
Call to Publishing OMA () returned ok.
Call to Publishing ActiveSync () returned ok.
Call to Publishing RPC () returned ok.
Call to Configuring RPC over HTTP () returned ok.
Call to Notify RUP for OWA () returned ok.
Call to Notify RUP for Monitoring () returned ok.
Call to Notify RUP for RPC () returned ok.
Call to Notify RUP for Companyweb () returned ok.
Error 0x80070003 returned from call to Restricting exhchangeoma to local server only().
Call to Restricting ConnectComputer to local network only () returned ok.
Call to GetInternetServerName () returned ok.
Call to GetNetbiosDomainName () returned ok.
Call to NotifyProvisioning () returned ok.
Call to Limiting number of connections () returned ok.
Call to Sending RUP intro mail () returned ok.
Call to Saving web publishing selection () returned ok.
calling Set Web Publishing Rules (0x0).
Call to GetPrivateNICGuid () returned ok.
Call to WMIGetIPAddress () returned ok.
Call to IISConfig Set () returned ok.
Call to Setting default logon domain for OMA () returned ok.
Call to Setting Anonymous Access () returned ok.
Call to CRFireCommit::Commit () returned ok.
Calling CCertCommit::CommitEx
Calling CCertCommit::ValidatePropertyBag
Require SSL for OWA: 1
Require SSL for Remote Portal: 1
Require SSL for Monitoring: 0
Require SSL for OMA: 0
Require SSL for CompanyWeb: 0
Require 128 Bit Encryption: 1
Cert selection: -1
CCertCommit::ValidatePropertyBag returned OK
Opening the cert store returned OK
Reading the computer name returned OK
Reading the fully qualified server name returned OK
CCertCommit::EnableSSL returned OK
CCertCommit::RequireSSL returned OK
CCertCommit::NotifyRemoteUserPortal returned OK
Reading the Internet Server Name returned OK
Updating provisioning info returned OK
Sending RUP intro mail returned OK
CCertCommit::SaveUserSelections returned OK
CCertCommit::CommitEx returned OK
calling CEmailCommit::Commit (0x1012248).
calling CEmailCommit::ValidatePropertyBag ().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6e488).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x25cc20, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
calling ReadBool (0x25cc20, F71526DD-9C19-4fe9-B7DB-FD4360909275).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cc20, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadBool () returned ok.
The out param of ReadBool() is 0.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cc20, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadInt4 (0x25cc20, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyLong ().
Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
calling ReadString (0x25cc20, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is heritageleaders.com.
calling ReadBool (0x25cc20, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling ReadInt4 (0x25cc20, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyHostName ().
Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
calling AttachCommiter.Validate(pPPPBag) (0x25cc20, 01637C90-B142-41C4-8520-6B2E0F891BE7).
calling CAttachCommiter::Validate (0x25cc20).
calling CAttachCommiter::Validate:ReadVariant (0x0).
calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
Call to CAttachCommiter::Validate () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6e4f4).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x25cc20, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling GetDomainAndControllerNames ().
Call to GetDomainAndControllerNames () returned ok.
calling GetOrganizationName (\\heritage.hpi.local, DC=hpi,DC=local).
Call to GetOrganizationName () returned ok.
calling GetFirstAdministrativeGroup (\\heritage.hpi.local, DC=hpi,DC=local, HPI).
Call to GetFirstAdministrativeGroup () returned ok.
calling GetFirstRoutingGroup (\\heritage.hpi.local, DC=hpi,DC=local, HPI, first administrative group).
Call to GetFirstRoutingGroup () returned ok.
Call to SetCookieAuthentication () returned ok.
Call to Enabling Wireless admin for OMA () returned ok.
Call to Setting SMTPSVC to start up automatically () returned ok.
calling CAttachCommiter::Commit (0x25cc20).
calling CAttachCommiter::Commit:ReadVariant(GUID_ATTACH_CONFIG) (0x0).
calling CAttachCommiter::Commit:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Commit:m_spDoc->loadXML (0x0).
calling CAttachCommiter::Commit:WriteConfigFile (0x0).
calling CAttachCommiter::WriteConfigFile (0x40000003).
calling CAttachCommiter::WriteConfigFile:_GetSBSInstallDir (0x0).
calling CAttachCommiter::WriteConfigFile:m_spDoc->save (0x0).
Call to CAttachCommiter::WriteConfigFile () returned ok.
calling CAttachCommiter::Commit:ShouldEnableSink (0x0).
calling CAttachCommiter::ShouldEnableSink (0x40000003).
calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectSingleNode (0x40000003).
calling CAttachCommiter::ShouldEnableSink:spEnabledNode->get_text (0x40000003).
calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectNodes (0x40000003).
calling CAttachCommiter::ShouldEnableSink:pUnsafeAttachsNodeList->get_length (0x40000003).
Call to CAttachCommiter::ShouldEnableSink () returned ok.
calling CAttachCommiter::Commit:pSink.CoCreateInstance(SecAttsEventSink) (0x0).
calling CAttachCommiter::Commit:pSink->Register (0x0).
Call to CAttachCommiter::Commit () returned ok.
calling EnableSMTPConnector (0x25cc20, \\heritage.hpi.local, DC=hpi,DC=local, HPI).
calling DoRecipientPolicy (0x25cc20).
calling ReadString (0x25cc20, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is heritageleaders.com.
calling FinalValidateHostName (heritageleaders.com).
Call to FinalValidateHostName () returned ok.
calling GetDefaultPolicy (0x6e360).
Call to GetDefaultPolicy () returned ok.
calling GetPostmasterProxyAddresses ().
Call to GetPostMasterProxyAddresses () returned ok.
calling UpdatePostmasterAddress (0x1c2fd90, heritageleaders.com).
Call to UpdatePostmasterAddress () returned ok.
calling ResetRUS ().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
Call to ResetRUS () returned ok.
calling SetDefaultPolicy (heritageleaders.com).
calling SetDefaultSMTPRecipient (0x1c442f8, heritageleaders.com).
calling GetDefaultRecipientArray (0x1c442f8, 0x6e2ec).
Call to GetDefaultRecipientArray () returned ok.
calling SafeArrayGetLBound (0x1c44790, 1, 0x6e2e4).
The out param of SafeArrayGetLBound() is 0.
calling SafeArrayGetUBound (0x1c44790, 1, 0x6e2e0).
The out param of SafeArrayGetUBound() is 4.
calling SafeArrayGetElement (0x1c44790, 0, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@heritagepartnersintl.com.
calling UpdateRUS (smtp:@heritagepartnersintl.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c44790, 0, smtp:@heritagepartnersintl.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c44790, 1, 0x6e29c).
The out param of SafeArrayGetElement() is SMTP:@heritageleaders.com.
calling UpdateRUS (SMTP:@heritageleaders.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c44790, 1, SMTP:@heritageleaders.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c44790, 2, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@heritagepartnersinternational.com.
calling UpdateRUS (smtp:@heritagepartnersinternational.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c44790, 2, smtp:@heritagepartnersinternational.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c44790, 3, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@hpi.local.
calling UpdateRUS (smtp:@hpi.local).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c44790, 3, smtp:@hpi.local).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c44790, 4, 0x6e29c).
The out param of SafeArrayGetElement() is X400:c=US;a= ;p=HPI;o=Exchange;.
calling SafeArrayCopy (0x1c44790).
Call to SafeArrayCopy () returned ok.
calling LogSet_gatewayProxy ().
Element: smtp:@heritagepartnersintl.com.
Element: SMTP:@heritageleaders.com.
Element: smtp:@heritagepartnersinternational.com.
Element: smtp:@hpi.local.
Element: X400:c=US;a= ;p=HPI;o=Exchange;.
Call to LogSet_gatewayProxy () returned ok.
calling pADs->SetInfo ().
Call to pADs->SetInfo () returned ok.
calling SafeArrayDestroy (0x1c44790).
Ignoring return value from call to SafeArrayDestroy().
Call to SetDefaultSMTPRecipient () returned ok.
Call to SetDefaultPolicy () returned ok.
calling KickRUS ().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
Call to KickRUS () returned ok.
Call to DoRecipientPolicy () returned ok.
calling DoSmtpRelayIp ().
Call to DoSmtpRelayIp () returned ok.
calling ADsGetObject (LDAP://heritage.hpi.local/CN=SmallBusiness SMTP connector,CN=Connections,CN=first routing group,CN=Routing Groups,CN=first administrative group,CN=Administrative Groups,CN=HPI,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hpi,DC=local, IADs, 0x6e3cc).
Call to ADsGetObject () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling _RestartService (RESvc, 1).
Call to _RestartService () returned ok.
calling _RestartService (SMTPSvc, 1).
Call to _RestartService () returned ok.
Call to EnableSMTPConnector () returned ok.
Error 0x80070003 returned from call to CEMailCommit::Commit().
calling GetBOConnector ().
Call to GetBOConnector () returned ok.
calling spADs->PutEx (ADS_PROPERTY_CLEAR, msExchSmtpOutboundSecurityPassword).
Call to spADs->PutEx () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.

2/11/2009 3:27 PM
c:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizinet.dll, version 5.2.2893.0
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Call to Reading hardware selection () returned ok.
Hardware selection: 0
Call to Validating hardware selection () returned ok.
Call to Reading LAN NIC Guid () returned ok.
LAN NIC Guid: {382C8308-00FD-4BAD-BD8A-CD2176F732A4}
Call to Validating LAN NIC Guid () returned ok.
Call to Validating NIC properties () returned ok.
Broadband selection: 1
Call to Validating broadband selection () returned ok.
calling CNetCommit::ValidateRouterConnectionProperties ().
Call to Reading UPNP selection () returned ok.
NOT a UPnP router
Call to Reading Router IP () returned ok.
Router IP: 192.168.1.1
Call to Validating Router IP () returned ok.
Call to Reading preferred DNS server IP () returned ok.
Preferred DNS server IP: 66.6.65.6
Call to Validating preferred DNS server IP () returned ok.
Call to Reading alternate DNS server IP () returned ok.
Alternate DNS server IP: 66.6.65.5
Call to Validating alternate DNS server IP () returned ok.
Call to Validating preferred and alternate DNS servers () returned ok.
Call to Reading router on second NIC () returned ok.
Call to CNetCommit::ValidateRouterConnectionProperties () returned ok.

2/11/2009 3:27 PM
c:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
calling CRFireCommit::ValidatePropertyBag (0x25cea8).
Call to This is a Router Single Nic configuration only Web Publishing will be configured, Basic Firewall will not be configured. () returned ok.
Call to Reading web publishing selection () returned ok.
Call to Reading OWA publishing selection () returned ok.
Call to Reading RUP publishing selection () returned ok.
Call to Reading Monitoring publishing selection () returned ok.
Call to Reading OMA publishing selection () returned ok.
Call to Reading RPC publishing selection () returned ok.
Call to Reading Companyweb publishing selection () returned ok.
Call to Reading ROOT publishing selection () returned ok.
Web publishing selections:
OWA publishing: 1
RUP publishing: 0
Monitoring publishing: 1
OMA publishing: 1
RPC publishing: 1
Companyweb publishing: 0
ROOT publishing: 1
Call to CRFireCommit::ValidatePropertyBag () returned ok.

2/11/2009 3:27 PM
c:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizcert.dll, version 5.2.2893.0
Calling CCertCommit::ValidatePropertyBag
Require SSL for OWA: 1
Require SSL for Remote Portal: 1
Require SSL for Monitoring: 0
Require SSL for OMA: 0
Require SSL for CompanyWeb: 0
Require 128 Bit Encryption: 1
Cert selection: -1
CCertCommit::ValidatePropertyBag returned OK

2/11/2009 3:27 PM
c:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizemail.dll, version 5.2.2893.0
calling CEmailCommit::ValidatePropertyBag ().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6e50c).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x25cea8, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
calling ReadBool (0x25cea8, F71526DD-9C19-4fe9-B7DB-FD4360909275).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cea8, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadBool () returned ok.
The out param of ReadBool() is 0.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cea8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadInt4 (0x25cea8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyLong ().
Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
calling ReadString (0x25cea8, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is heritageleaders.com.
calling ReadBool (0x25cea8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling ReadInt4 (0x25cea8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyHostName ().
Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
calling AttachCommiter.Validate(pPPPBag) (0x25cea8, 01637C90-B142-41C4-8520-6B2E0F891BE7).
calling CAttachCommiter::Validate (0x25cea8).
calling CAttachCommiter::Validate:ReadVariant (0x0).
calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
Call to CAttachCommiter::Validate () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling CNetCommit::Commit (2477736).
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Property bag is not dirty, skipping validation
calling CNetCommit::Common ().
calling CNetCommit::GetLanNicInfo ().
LAN NIC Guid: {382C8308-00FD-4BAD-BD8A-CD2176F732A4}
Call to Converting LAN NIC Guid () returned ok.
Call to Getting IP address for the LAN NIC () returned ok.
Call to Reading in the LAN NIC info () returned ok.
Call to Fixing the TCP/IP NIC Binding order () returned ok.
Dhcp server is installed and not disabled
Call to Set DHCP Server to start up automatically () returned ok.
DNS server is installed and not disabled
Call to Changing startup type for DNS () returned ok.
Call to Clearing DNS server entries on the LAN NIC () returned ok.
Call to Setting DNS server IP for the LAN NIC () returned ok.
Call to Resetting DNS recursion timeout () returned ok.
Call to Resetting client dns query timouts in config.dat () returned ok.
Call to DsGetDcName for local domain name () returned ok.
Call to Disabling RRAS routing () returned ok.
calling CNetCommit::DoRouter ().
Call to Clearing the default gateway on the LAN NIC () returned ok.
Call to Setting default gateway on the LAN NIC () returned ok.
Call to Setting DNS forwarders () returned ok.
Call to Preparing DNS for DNS listener reset () returned ok.
Call to Resetting DNS listeners () returned ok.
URL to the router is http://192.168.1.1
Call to Adding routers IP address to the intranet zone () returned ok.
Call to CNetCommit::DoRouter () returned ok.
Call to Configuring for router connection () returned ok.
calling ConfigureIE ().
calling SetInternetOptions ((null), (null), (null)).
calling InternetSetOptionA (NULL, INTERNET_OPTION_PER_CONNECTION_OPTION).
Call to InternetSetOptionA () returned ok.
Call to SetInternetOptions () returned ok.
calling InternetSetOption_AutodialConnection ().
Call to InternetSetOption_AutodialConnection () returned ok.
calling InternetSetOption_AutodialMode (4).
Call to InternetSetOption_AutodialMode () returned ok.
calling InternetSetOption_DisableAutodial (0).
Call to InternetSetOption_DisableAutodial () returned ok.
Call to ConfigureIE () returned ok.
Call to Configuring IE for router connection () returned ok.
Call to Notifying client setup for Default gateway as the router () returned ok.
calling RegisterMSBOExchangeBP (0).
Error 0x1 returned from call to RegisterMSBOExchangeBP().
Call to Unregistering the smtp sink () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Reading in the local domain name () returned ok.
Local Domain Name is: hpi.local
Call to Enabling secure dynamic DNS updates () returned ok.
Call to Disabling RoundRobin for DNS server () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Configuring DHCP options () returned ok.
Call to Disabling the RASUTO service () returned ok.
Call to Configuring w32time parameters for fulltime () returned ok.
Call to Configuring the time service () returned ok.
Call to Notifying RWW for ISA () returned ok.
Call to CNetCommit::Common () returned ok.
Call to CNetCommit::Commit () returned ok.
calling CRFireCommit::CommitEx (0x25cea8).
calling CRFireCommit::ValidatePropertyBag (0x25cea8).
Call to This is a Router Single Nic configuration only Web Publishing will be configured, Basic Firewall will not be configured. () returned ok.
Call to Reading web publishing selection () returned ok.
Call to Reading OWA publishing selection () returned ok.
Call to Reading RUP publishing selection () returned ok.
Call to Reading Monitoring publishing selection () returned ok.
Call to Reading OMA publishing selection () returned ok.
Call to Reading RPC publishing selection () returned ok.
Call to Reading Companyweb publishing selection () returned ok.
Call to Reading ROOT publishing selection () returned ok.
Web publishing selections:
OWA publishing: 1
RUP publishing: 0
Monitoring publishing: 1
OMA publishing: 1
RPC publishing: 1
Companyweb publishing: 0
ROOT publishing: 1
Call to CRFireCommit::ValidatePropertyBag () returned ok.
Call to GetPrivateNICGuid () returned ok.
Call to GetIPAddress for private nic () returned ok.
Call to GetSubnetMask for private nic () returned ok.
RUP is not published
Call to Fixing the inheritance for root dir () returned ok.
Call to Unpublishing the default web site () returned ok.
Call to Fixing the inheritance for companyweb dir () returned ok.
Call to Unpublishing companyweb () returned ok.
Call to Publishing root () returned ok.
Call to Publishing /Exchange () returned ok.
Call to Publishing /ExchWeb () returned ok.
Call to Publishing /Public () returned ok.
Call to Publishing /ExAdmin () returned ok.
Call to Publishing Monitoring () returned ok.
Call to Publishing OMA () returned ok.
Call to Publishing ActiveSync () returned ok.
Call to Publishing RPC () returned ok.
Call to Configuring RPC over HTTP () returned ok.
Call to Notify RUP for OWA () returned ok.
Call to Notify RUP for Monitoring () returned ok.
Call to Notify RUP for RPC () returned ok.
Call to Notify RUP for Companyweb () returned ok.
Error 0x80070003 returned from call to Restricting exhchangeoma to local server only().
Call to Restricting ConnectComputer to local network only () returned ok.
Call to GetInternetServerName () returned ok.
Call to GetNetbiosDomainName () returned ok.
Call to NotifyProvisioning () returned ok.
Call to Limiting number of connections () returned ok.
Call to Sending RUP intro mail () returned ok.
Call to Saving web publishing selection () returned ok.
calling Set Web Publishing Rules (0x0).
Call to GetPrivateNICGuid () returned ok.
Call to WMIGetIPAddress () returned ok.
Call to IISConfig Set () returned ok.
Call to Setting default logon domain for OMA () returned ok.
Call to Setting Anonymous Access () returned ok.
Call to CRFireCommit::Commit () returned ok.
Calling CCertCommit::CommitEx
Calling CCertCommit::ValidatePropertyBag
Require SSL for OWA: 1
Require SSL for Remote Portal: 1
Require SSL for Monitoring: 0
Require SSL for OMA: 0
Require SSL for CompanyWeb: 0
Require 128 Bit Encryption: 1
Cert selection: -1
CCertCommit::ValidatePropertyBag returned OK
Opening the cert store returned OK
Reading the computer name returned OK
Reading the fully qualified server name returned OK
CCertCommit::EnableSSL returned OK
CCertCommit::RequireSSL returned OK
CCertCommit::NotifyRemoteUserPortal returned OK
Reading the Internet Server Name returned OK
Updating provisioning info returned OK
Sending RUP intro mail returned OK
CCertCommit::SaveUserSelections returned OK
CCertCommit::CommitEx returned OK
calling CEmailCommit::Commit (0x10128e0).
calling CEmailCommit::ValidatePropertyBag ().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6e488).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x25cea8, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
calling ReadBool (0x25cea8, F71526DD-9C19-4fe9-B7DB-FD4360909275).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cea8, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadBool () returned ok.
The out param of ReadBool() is 0.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x25cea8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadInt4 (0x25cea8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyLong ().
Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
calling ReadString (0x25cea8, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is heritageleaders.com.
calling ReadBool (0x25cea8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling ReadInt4 (0x25cea8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyHostName ().
Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
calling AttachCommiter.Validate(pPPPBag) (0x25cea8, 01637C90-B142-41C4-8520-6B2E0F891BE7).
calling CAttachCommiter::Validate (0x25cea8).
calling CAttachCommiter::Validate:ReadVariant (0x0).
calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
Call to CAttachCommiter::Validate () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6e4f4).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x25cea8, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling GetDomainAndControllerNames ().
Call to GetDomainAndControllerNames () returned ok.
calling GetOrganizationName (\\heritage.hpi.local, DC=hpi,DC=local).
Call to GetOrganizationName () returned ok.
calling GetFirstAdministrativeGroup (\\heritage.hpi.local, DC=hpi,DC=local, HPI).
Call to GetFirstAdministrativeGroup () returned ok.
calling GetFirstRoutingGroup (\\heritage.hpi.local, DC=hpi,DC=local, HPI, first administrative group).
Call to GetFirstRoutingGroup () returned ok.
Call to SetCookieAuthentication () returned ok.
Call to Enabling Wireless admin for OMA () returned ok.
Call to Setting SMTPSVC to start up automatically () returned ok.
calling CAttachCommiter::Commit (0x25cea8).
calling CAttachCommiter::Commit:ReadVariant(GUID_ATTACH_CONFIG) (0x0).
calling CAttachCommiter::Commit:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Commit:m_spDoc->loadXML (0x0).
calling CAttachCommiter::Commit:WriteConfigFile (0x0).
calling CAttachCommiter::WriteConfigFile (0x40000003).
calling CAttachCommiter::WriteConfigFile:_GetSBSInstallDir (0x0).
calling CAttachCommiter::WriteConfigFile:m_spDoc->save (0x0).
Call to CAttachCommiter::WriteConfigFile () returned ok.
calling CAttachCommiter::Commit:ShouldEnableSink (0x0).
calling CAttachCommiter::ShouldEnableSink (0x40000003).
calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectSingleNode (0x40000003).
calling CAttachCommiter::ShouldEnableSink:spEnabledNode->get_text (0x40000003).
calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectNodes (0x40000003).
calling CAttachCommiter::ShouldEnableSink:pUnsafeAttachsNodeList->get_length (0x40000003).
Call to CAttachCommiter::ShouldEnableSink () returned ok.
calling CAttachCommiter::Commit:pSink.CoCreateInstance(SecAttsEventSink) (0x0).
calling CAttachCommiter::Commit:pSink->Register (0x0).
Call to CAttachCommiter::Commit () returned ok.
calling EnableSMTPConnector (0x25cea8, \\heritage.hpi.local, DC=hpi,DC=local, HPI).
calling DoRecipientPolicy (0x25cea8).
calling ReadString (0x25cea8, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is heritageleaders.com.
calling FinalValidateHostName (heritageleaders.com).
Call to FinalValidateHostName () returned ok.
calling GetDefaultPolicy (0x6e360).
Call to GetDefaultPolicy () returned ok.
calling GetPostmasterProxyAddresses ().
Call to GetPostMasterProxyAddresses () returned ok.
calling UpdatePostmasterAddress (0x1c36820, heritageleaders.com).
Call to UpdatePostmasterAddress () returned ok.
calling ResetRUS ().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
Call to ResetRUS () returned ok.
calling SetDefaultPolicy (heritageleaders.com).
calling SetDefaultSMTPRecipient (0x1c5c728, heritageleaders.com).
calling GetDefaultRecipientArray (0x1c5c728, 0x6e2ec).
Call to GetDefaultRecipientArray () returned ok.
calling SafeArrayGetLBound (0x1c5cbc0, 1, 0x6e2e4).
The out param of SafeArrayGetLBound() is 0.
calling SafeArrayGetUBound (0x1c5cbc0, 1, 0x6e2e0).
The out param of SafeArrayGetUBound() is 4.
calling SafeArrayGetElement (0x1c5cbc0, 0, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@heritagepartnersintl.com.
calling UpdateRUS (smtp:@heritagepartnersintl.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c5cbc0, 0, smtp:@heritagepartnersintl.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c5cbc0, 1, 0x6e29c).
The out param of SafeArrayGetElement() is SMTP:@heritageleaders.com.
calling UpdateRUS (SMTP:@heritageleaders.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c5cbc0, 1, SMTP:@heritageleaders.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c5cbc0, 2, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@heritagepartnersinternational.com.
calling UpdateRUS (smtp:@heritagepartnersinternational.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c5cbc0, 2, smtp:@heritagepartnersinternational.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c5cbc0, 3, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@hpi.local.
calling UpdateRUS (smtp:@hpi.local).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x1c5cbc0, 3, smtp:@hpi.local).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x1c5cbc0, 4, 0x6e29c).
The out param of SafeArrayGetElement() is X400:c=US;a= ;p=HPI;o=Exchange;.
calling SafeArrayCopy (0x1c5cbc0).
Call to SafeArrayCopy () returned ok.
calling LogSet_gatewayProxy ().
Element: smtp:@heritagepartnersintl.com.
Element: SMTP:@heritageleaders.com.
Element: smtp:@heritagepartnersinternational.com.
Element: smtp:@hpi.local.
Element: X400:c=US;a= ;p=HPI;o=Exchange;.
Call to LogSet_gatewayProxy () returned ok.
calling pADs->SetInfo ().
Call to pADs->SetInfo () returned ok.
calling SafeArrayDestroy (0x1c5cbc0).
Ignoring return value from call to SafeArrayDestroy().
Call to SetDefaultSMTPRecipient () returned ok.
Call to SetDefaultPolicy () returned ok.
calling KickRUS ().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
Call to KickRUS () returned ok.
Call to DoRecipientPolicy () returned ok.
calling DoSmtpRelayIp ().
Call to DoSmtpRelayIp () returned ok.
calling ADsGetObject (LDAP://heritage.hpi.local/CN=SmallBusiness SMTP connector,CN=Connections,CN=first routing group,CN=Routing Groups,CN=first administrative group,CN=Administrative Groups,CN=HPI,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=hpi,DC=local, IADs, 0x6e3cc).
Call to ADsGetObject () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling _RestartService (RESvc, 1).
Call to _RestartService () returned ok.
calling _RestartService (SMTPSvc, 1).
Call to _RestartService () returned ok.
Call to EnableSMTPConnector () returned ok.
Error 0x80070003 returned from call to CEMailCommit::Commit().
0
 
suppsawsCommented:
okay, that is why i need to ask for the ERRORS in the logs first :-)
here thay are:
Error 0x1 returned from call to RegisterMSBOExchangeBP().
Error 0x80070003 returned from call to Restricting exhchangeoma to local server only().
Error 0x80070003 returned from call to CEMailCommit::Commit().
Error 0x1 returned from call to RegisterMSBOExchangeBP().

first questions, are you running sbs 2003 premium? (that is with ISA I mean)
did you reboot the server after the move?
check your IIS:  is the OWA site in place?
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
That sounds like the exchange-oma directory is missing in IIS.  See http://support.microsoft.com/kb/883380 for assistance to repair it.

Jeff
TechSoEasy
0
 
paulviAuthor Commented:
No we are not running premium.
I don't rember if I rebooted immediately after the move, but the server has been rebooted several times today.

check your IIS:  is the OWA site in place?
How do I check this?
0
 
paulviAuthor Commented:
exchange-oma directory is still listed in IIS
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Open IIS Manager > Web Sites > Default Web Site

Is there an exchange-oma directory listed?

Is there an OWA directory listed?

Jeff
TechSoEasy
0
 
paulviAuthor Commented:
yes
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Please open a command prompt and run "systeminfo" and then post the results here.

Jeff
TechSoEasy
0
 
paulviAuthor Commented:
Host Name:                
OS Name:                   Microsoft(R) Windows(R) Server 2003 for Small Busines
s Server
OS Version:                5.2.3790 Service Pack 1 Build 3790
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Primary Domain Controller
OS Build Type:             Multiprocessor Free
Registered Owner:          
Registered Organization:  
Product ID:                
Original Install Date:     1/30/2005, 3:24:57 PM
System Up Time:            0 Days, 4 Hours, 57 Minutes, 37 Seconds
System Manufacturer:       HP
System Model:              ProLiant ML330 G3
System Type:               X86-based PC
Processor(s):              2 Processor(s) Installed.
                           [01]: x86 Family 15 Model 2 Stepping 9 GenuineIntel ~
2399 Mhz
                           [02]: x86 Family 15 Model 2 Stepping 9 GenuineIntel ~
2399 Mhz
BIOS Version:              COMPAQ - 2
Windows Directory:         C:\WINDOWS
System Directory:          C:\WINDOWS\system32
Boot Device:               \Device\HarddiskVolume1
System Locale:             en-us;English (United States)
Input Locale:              en-us;English (United States)
Time Zone:                 (GMT-05:00) Eastern Time (US & Canada)
Total Physical Memory:     1,791 MB
Available Physical Memory: 135 MB
Page File: Max Size:       1,648 MB
Page File: Available:      52 MB
Page File: In Use:         1,596 MB
Page File Location(s):     c:\pagefile.sys
                           e:\pagefile.sys
Domain:                    hpi.local
Logon Server:              \\HERITAGE
Hotfix(s):                 331 Hotfix(s) Installed.
                           [01]: File 1
                           [02]: File 1
                           [03]: File 1
                           [04]: File 1
                           [05]: File 1
                           [06]: File 1
                           [07]: File 1
                           [08]: File 1
                           [09]: File 1
                           [10]: File 1
                           [11]: File 1
                           [12]: File 1
                           [13]: File 1
                           [14]: File 1
                           [15]: File 1
                           [16]: File 1
                           [17]: File 1
                           [18]: File 1
                           [19]: File 1
                           [20]: File 1
                           [21]: File 1
                           [22]: File 1
                           [23]: File 1
                           [24]: File 1
                           [25]: File 1
                           [26]: File 1
                           [27]: File 1
                           [28]: File 1
                           [29]: File 1
                           [30]: File 1
                           [31]: File 1
                           [32]: File 1
                           [33]: File 1
                           [34]: File 1
                           [35]: File 1
                           [36]: File 1
                           [37]: File 1
                           [38]: File 1
                           [39]: File 1
                           [40]: File 1
                           [41]: File 1
                           [42]: File 1
                           [43]: File 1
                           [44]: File 1
                           [45]: File 1
                           [46]: File 1
                           [47]: File 1
                           [48]: File 1
                           [49]: File 1
                           [50]: File 1
                           [51]: File 1
                           [52]: File 1
                           [53]: File 1
                           [54]: File 1
                           [55]: File 1
                           [56]: File 1
                           [57]: File 1
                           [58]: File 1
                           [59]: File 1
                           [60]: File 1
                           [61]: File 1
                           [62]: File 1
                           [63]: File 1
                           [64]: File 1
                           [65]: File 1
                           [66]: File 1
                           [67]: File 1
                           [68]: File 1
                           [69]: File 1
                           [70]: File 1
                           [71]: File 1
                           [72]: File 1
                           [73]: File 1
                           [74]: File 1
                           [75]: File 1
                           [76]: File 1
                           [77]: File 1
                           [78]: File 1
                           [79]: File 1
                           [80]: File 1
                           [81]: File 1
                           [82]: File 1
                           [83]: File 1
                           [84]: File 1
                           [85]: File 1
                           [86]: File 1
                           [87]: File 1
                           [88]: File 1
                           [89]: File 1
                           [90]: File 1
                           [91]: File 1
                           [92]: File 1
                           [93]: File 1
                           [94]: File 1
                           [95]: File 1
                           [96]: File 1
                           [97]: File 1
                           [98]: File 1
                           [99]: File 1
                           [100]: File 1
                           [101]: File 1
                           [102]: File 1
                           [103]: File 1
                           [104]: File 1
                           [105]: File 1
                           [106]: File 1
                           [107]: File 1
                           [108]: File 1
                           [109]: File 1
                           [110]: File 1
                           [111]: File 1
                           [112]: File 1
                           [113]: File 1
                           [114]: File 1
                           [115]: File 1
                           [116]: File 1
                           [117]: File 1
                           [118]: File 1
                           [119]: File 1
                           [120]: File 1
                           [121]: File 1
                           [122]: File 1
                           [123]: File 1
                           [124]: File 1
                           [125]: File 1
                           [126]: File 1
                           [127]: File 1
                           [128]: File 1
                           [129]: File 1
                           [130]: File 1
                           [131]: File 1
                           [132]: File 1
                           [133]: File 1
                           [134]: File 1
                           [135]: File 1
                           [136]: File 1
                           [137]: File 1
                           [138]: File 1
                           [139]: File 1
                           [140]: File 1
                           [141]: File 1
                           [142]: File 1
                           [143]: File 1
                           [144]: File 1
                           [145]: File 1
                           [146]: File 1
                           [147]: File 1
                           [148]: File 1
                           [149]: File 1
                           [150]: File 1
                           [151]: File 1
                           [152]: File 1
                           [153]: File 1
                           [154]: Q147222
                           [155]: KB867460 - QFE
                           [156]: KB886903 - QFE
                           [157]: KB933854 - QFE
                           [158]: SP1 - SP
                           [159]: KB870669
                           [160]: Q832483
                           [161]: KB911829 - Update
                           [162]: KB912442 - Update
                           [163]: KB916803 - Update
                           [164]: KB924334 - Update
                           [165]: KB926666 - Update
                           [166]: KB931832 - Update
                           [167]: KB950159 - Update
                           [168]: KB959897 - Update
                           [169]: Q827429
                           [170]: Q927978
                           [171]: Q936181
                           [172]: Q954430
                           [173]: Q828026
                           [174]: Q828026 - Update
                           [175]: KB925398_WMP64
                           [176]: KB885492 - Update
                           [177]: KB889101 - Service Pack
                           [178]: KB883939 - Update
                           [179]: KB890046 - Update
                           [180]: KB893756 - Update
                           [181]: KB896358 - Update
                           [182]: KB896422 - Update
                           [183]: KB896424 - Update
                           [184]: KB896428 - Update
                           [185]: KB896688 - Update
                           [186]: KB896727 - Update
                           [187]: KB899587 - Update
                           [188]: KB899588 - Update
                           [189]: KB899589 - Update
                           [190]: KB899591 - Update
                           [191]: KB900725 - Update
                           [192]: KB901017 - Update
                           [193]: KB901214 - Update
                           [194]: KB902400 - Update
                           [195]: KB903235 - Update
                           [196]: KB904706 - Update
                           [197]: KB905414 - Update
                           [198]: KB905915 - Update
                           [199]: KB908519 - Update
                           [200]: KB908531 - Update
                           [201]: KB908981 - Update
                           [202]: KB910437 - Update
                           [203]: KB911280 - Update
                           [204]: KB911562 - Update
                           [205]: KB911567 - Update
                           [206]: KB911897 - Update
                           [207]: KB911927 - Update
                           [208]: KB912812 - Update
                           [209]: KB912919 - Update
                           [210]: KB913446 - Update
                           [211]: KB914388 - Update
                           [212]: KB914389 - Update
                           [213]: KB916281 - Update
                           [214]: KB917159 - Update
                           [215]: KB917344 - Update
                           [216]: KB917422 - Update
                           [217]: KB917537 - Update
                           [218]: KB917734 - Update
                           [219]: KB917953 - Update
                           [220]: KB918118 - Update
                           [221]: KB918439 - Update
                           [222]: KB918899 - Update
                           [223]: KB920213 - Update
                           [224]: KB920214 - Update
                           [225]: KB920670 - Update
                           [226]: KB920683 - Update
                           [227]: KB920685 - Update
                           [228]: KB921398 - Update
                           [229]: KB921883 - Update
                           [230]: KB922582 - Update
                           [231]: KB922616 - Update
                           [232]: KB922760 - Update
                           [233]: KB922819 - Update
                           [234]: KB923191 - Update
                           [235]: KB923414 - Update
                           [236]: KB923689 - Update
                           [237]: KB923694 - Update
                           [238]: KB923980 - Upda
Network Card(s):           1 NIC(s) Installed.
                           [01]: HP NC7760 Gigabit Server Adapter
                                 Connection Name: Server Local Area Connection
                                 DHCP Enabled:    No
                                 IP address(es)
                                 [01]: 192.168.1.3
0
 
suppsawsCommented:
guess you are not the only one:
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/SBS_Small_Business_Server/Q_23889485.html
although that one hasn't been solved I think, time to solve this one!

thing is this error:
Error 0x80070003 returned from call to Restricting exhchangeoma to local server only().

still guessing this is an IIS issue, what about ipconfig /all from server and error eventlogs, related to the problem?
0
 
paulviAuthor Commented:

PPP adapter RAS Server (Dial In) Interface:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
   Physical Address. . . . . . . . . : 00-53-45-00-00-00
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.1.19
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter Server Local Area Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : HP NC7760 Gigabit Server Adapter
   Physical Address. . . . . . . . . : 00-0F-20-97-B5-5C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.1.3
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.3
   Primary WINS Server . . . . . . . : 192.168.1.3


The IIS Admin Service service terminated unexpectedly.  It has done this 2 time(s).
I also have a virtual memory problem that I will be working on with MS.  Waiting for the performance team to call back
0
 
suppsawsCommented:
hm, starting to think a reinstall of IIS will be the solution, but not 100% sure of that.
http://support.microsoft.com/kb/320202
Since we are two, Jeff, what so you think?
0
 
paulviAuthor Commented:
This also involves reinstalling exchange?  Not liking that
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
No, I don't ever recommend reinstalling IIS anymore if it can be helped.

If the IIS Admin Service isn't running when you run the CEICW, then it will fail with the errors you are experiencing.

"I also have a virtual memory problem that I will be working on with MS.  Waiting for the performance team to call back"

What's the problem other than your paging file being too small?  Why is it only 1.7GB?  If you have 2GB of RAM, then your paging file should be 3GB.

Also, it doesn't look as though you've updated the server to SP2.  That really should be done as well.  http://sbsurl.com/sp2

Doing so will help tame some of the memory issues.

Jeff
TechSoEasy
0
 
paulviAuthor Commented:
That command line incorrectly showed my page file.
The page on C is 3.99 GB
The page on E is also 3.99 GB.
The task mgr is showing PF usage at almost 9.51 GB.  I see it does not add up.  This started after the updates last night.
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Well you don't really need 3.99GB on the C drive.  Drop that down to 200MB just to catch a minidump if necessary.

Then, I would absolutely make sure you install Windows Server 2003 SP2, but be sure to also install the various patches afterwards (as noted in the article I linked above for you)... because it will most likely fix the issue of IIS Manager Service stopping.

Jeff
TechSoEasy

0
 
paulviAuthor Commented:
Okay, after working with MS Support, They made a registry change and rebooted. The page file usage is now at 1.54 GB.  Oddly enough, OWA is working again.  You were both very helpful in this problem so I will split the points

Once again , THANKS

0
 
suppsawsCommented:
goog that this is solved.
what was the registry change?
0
 
paulviAuthor Commented:
HeapDecommitFreeBlockThreshold registry key found under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
I don't think that was odd at all... your memory issues were causing IIS Manager to quit, which would cause OWA to fail.  Glad you got it worked out.

Jeff
TechSoEasy

0

Featured Post

Problems using Powershell and Active Directory?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

  • 11
  • 7
  • 6
  • +1
Tackle projects and never again get stuck behind a technical roadblock.
Join Now