Link to home
Start Free TrialLog in
Avatar of sqlguy29
sqlguy29

asked on

Configuring 3rd DSL Modem for Specific Routeon a Sonicwall 3060Pro

Hello,
I have an office with 3 DSL Modems.  I have a Sonicwall 3060 Enhanced that allows me to Load Balance two of them.  We have alot of RDP connections inbound via VPN so I would like to route all Exchange traffic (RPC over HTTPS) to my Main office via the 3rd DSL line.

I have a 2nd smaller Sonicwall TZ150.  My idea was to connect the 3rd DSL line to the WAN port of the TZ150.  Then firewall everything except HTTPS traffic to and from my home offices Exchange IP.  Then I assigned an IP address to the LAN port of the TZ150 and another to a LAN port on the TZ3060 that was in the same subnet.  Then I setup a route for all traffic going to my exchange server to be routed out the 2nd LAN port of my TZ150.
The thought sounded good but I can get it to work.

So it should go
3060 LAN0X -->3060 LAN1X -->TZ150 LAN0X-->TZ150 WAN-->Internet-->Exchange Server

Thanks in advance
JL
ASKER CERTIFIED SOLUTION
Avatar of marcolive
marcolive

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial