randnlabs
asked on
Enabling remote access to SERVER
My server OS is WINDOWS SBS 2003 with SQL SERVER. We have a broadband connection with STATIC IP. My router is BEETEL 110BX1 provided by Airtel. We have used two NICs in the server, one with IP address as 192.168.0.1 for LAN and the other with 192.168.1.10 for connecting the ROUTER. The STATIC IP is configured in the router.
Now, i have enabled ROUTING AND REMOTE ACCESS in my server and all my LAN users are able to connect to the server desktop by giving the address 192.168.0.1/remote from their browsers. But when tried outside from our location with STATIC IP/REMOTE it is not working. Also when i telnet the static IP from remote location it is getting connected to ROUTER only. So, i did the port forwarding for incoming ports with range from 80 to 1433 and forwarded to 192.168.0.1. Still it is not working.
Advice me how to proceed.
Now, i have enabled ROUTING AND REMOTE ACCESS in my server and all my LAN users are able to connect to the server desktop by giving the address 192.168.0.1/remote from their browsers. But when tried outside from our location with STATIC IP/REMOTE it is not working. Also when i telnet the static IP from remote location it is getting connected to ROUTER only. So, i did the port forwarding for incoming ports with range from 80 to 1433 and forwarded to 192.168.0.1. Still it is not working.
Advice me how to proceed.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.