joshahhh
asked on
Hey man, I'm having the same problem the switch is responding with this error:
Hey man, I'm having the same problem the switch is responding with this error: switch:
switch:
switch: copy xmodem:flash c2950-i6q412-mz.121-14.EA1 a.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCBB0c2950-i6q412-mz.12 1-14.EA1a. bin: permission denied
switch:
??
I've done everything I know to do but Hyperterm is not sending the file or something. It always tells me that the remote device canceled the transfer? I'm using Vista.....I know this is stupid, but could that be the problem??? let me know what you think. I'd REAAAALLLLY appreciate it!
Thanks
-Josh
switch:
switch: copy xmodem:flash c2950-i6q412-mz.121-14.EA1
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCBB0c2950-i6q412-mz.12
switch:
??
I've done everything I know to do but Hyperterm is not sending the file or something. It always tells me that the remote device canceled the transfer? I'm using Vista.....I know this is stupid, but could that be the problem??? let me know what you think. I'd REAAAALLLLY appreciate it!
Thanks
-Josh
Make sure you also run this command before the copy:
flash_init
flash_init
ASKER
switch:
switch: copy xmodem: flash:c2950-i6q4l2-mz.121- 14.EA1a.bi n
Begin the Xmodem or Xmodem-1K transfer now...
CCBB0flashfs[0]: Cannot accept filenames longer than 45 characters.
flash:c29l: path name is too long
Now I'm getting this. I did the dir flash: command but got this output:
switch: dir flash:
Directory of flash:/
2 -rwx 1774 <date> config.text
3 -rwx 5 <date> private-config.text
5 -rwx 13 <date> env_vars
7737344 bytes available (4096 bytes used)
switch:
Flash is ready to have a new IOS installed? any thoughts? Thanks for the speedy reply, I really do appreciate it.
switch: copy xmodem: flash:c2950-i6q4l2-mz.121-
Begin the Xmodem or Xmodem-1K transfer now...
CCBB0flashfs[0]: Cannot accept filenames longer than 45 characters.
flash:c29l: path name is too long
Now I'm getting this. I did the dir flash: command but got this output:
switch: dir flash:
Directory of flash:/
2 -rwx 1774 <date> config.text
3 -rwx 5 <date> private-config.text
5 -rwx 13 <date> env_vars
7737344 bytes available (4096 bytes used)
switch:
Flash is ready to have a new IOS installed? any thoughts? Thanks for the speedy reply, I really do appreciate it.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thank you soooooooo much for the help. I had a student today in class delete the flash on one of our 2950 switches. They all know the delete flash:vlan.dat command, but for some reason today everyone forgot it. I haven't done xmodem in forever so I am really really rusty on it. Again, thank you so much for the help.
-Josh
-Josh
copy xmodem: flash:c2950-i6q412-mz.121-