Client push http request error after upgrade to sccm 2007

Posted on 2009-02-14
Last Modified: 2013-11-21

After upgrade my SMS 2003 site to sccm2007, I have problems with pushing/upgrading the SCCM 2007 client on my windows xp machines.

In the ccm.log file on the SCCM site server, are the no error, some files are push to the client and following error are show in the ccmsetup.log fil on the windows xp machine

<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="13:32:18.748+-60" date="02-13-2009" component="ccmsetup" context="" type="1" thread="6516" file="ccmsetup.cpp:2613">
<![LOG[Successfully ran BITS check.]LOG]!><time="13:32:18.935+-60" date="02-13-2009" component="ccmsetup" context="" type="1" thread="6516" file="ccmsetup.cpp:6944">
<![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)]LOG]!><time="13:32:18.935+-60" date="02-13-2009" component="ccmsetup" context="" type="3" thread="6516" file="ccmsetup.cpp:5808">
<![LOG[A Fallback Status Point has not been specified.  Message with STATEID='308' will not be sent.]LOG]!><time="13:32:18.935+-60" date="02-13-2009" component="ccmsetup" context="" type="1" thread="6516" file="ccmsetup.cpp:9169">

I hade some problems getting the MP Controle manager to work after upgrading from SMS 2003 SP3, I hade to manaul install the MP control, by running the MP.msi file

Info :
Server is running Windows 2003 SP2, with SCCM 2007 SP1 (upgrade from SMS 2003 SP3)
Client is running Windows XP SP3, with old sms 2003 adv. client

Question by:Focon
    LVL 15

    Expert Comment

    on first look it looks like the client cannot contact an SCCM server? have you extended the AD and defined boundaries?

    Author Comment


    Yes I have extended the AD, and defined my boundaries

    I háve no error's on the site, all components are Green

    I think that the problem is on the IIS server, I have read someting about, that client computer must be able to connect to http://<site server name>/ccm_client (i can't connect to that http site, I have a test site, where I can connect to this site, but I can see that problem is)

    I have be looking in my IIS log, but can find anything

    LVL 15

    Accepted Solution

    ok, so there has to be some information on this in one of the logs.... if your site status is all "green" that would tend to indicate your server believe's its fine...
    however, the logs which contain the information for when a client is pushed will surely give us some info on why it cant push the client to clients.

    Write Comment

    Please enter a first name

    Please enter a last name

    We will never share this with anyone.

    Featured Post

    Too many email signature changes to deal with?

    Are you constantly being asked to update your organization's email signatures? Do they take up too much of your time? Wouldn't you love to be able to manage all signatures from one central location, easily design them and deploy them quickly to users. Well, you can!

    The environment that this is running in is SCCM 2007 R2 running on a Windows 2008 R2 server. The PXE Distribution point is running on its own Windows 2008 R2 box. This is what Event viewer showed after trying to start the WDS service:  An erro…
    Welcome to my series of short tips on migrations. Whilst based on Microsoft migrations the same principles can be applied to any type of migration. My first tip Migration Tip #1 – Source Server Health can be found listed in my profile here: http:…
    Sending a Secure fax is easy with eFax Corporate ( First, Just open a new email message.  In the To field, type your recipient's fax number You can even send a secure international fax — just include t…
    Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

    758 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    10 Experts available now in Live!

    Get 1:1 Help Now