• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 708
  • Last Modified:

Cisco Interworking: Mpls Atm to Ethernet/Vlan : i see MAC and receive packet but not sent

Hi

i have a Interworking Ethernet :

Router A:

pseudowire-class EtherAccess
 encapsulation mpls
 interworking ethernet

interface ATM2/0.861 point-to-point
 mtu 1546
 no atm enable-ilmi-trap
 pvc TEST 1/861 l2transport
  encapsulation aal5snap
  xconnect 172.20.1.30 1101 pw-class EtherAccess




Router B:

pseudowire-class EtherAccess
 encapsulation mpls
 interworking ethernet

interface GigabitEthernet2/0.1100
 encapsulation dot1Q 1100
 no cdp enable
 xconnect 172.20.1.10 1100 pw-class EtherAccess


The L2 tunnel are up and i see a trafic. I see to:

- On CE B, connected to the Router B, i see the mac address of CE A
- When CE A sent a Ping to CE B, i see on the CE B the packet and i see
the packet answer. But CE A don't see the answer.


Anyone know this problem ? why CE A don't see the mac address of CE B ?

thanks
jerome


0
jpc42
Asked:
jpc42
  • 2
1 Solution
 
jpc42Author Commented:
Sorry, a error :

The CE A see the mac of CE B and CE B see the mac of CE A.

can i see the packet traffic on a ATM interface ?

0
 
jpc42Author Commented:
Ok i have the answer, i don't have put:

  vbr-nrt 2048 2048 1

because the ATM link are at 2Mbits

i close the answer
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now