?
Solved

How do I prioritise VOIP voice traffic on a Billion router

Posted on 2009-02-17
2
Medium Priority
?
525 Views
Last Modified: 2012-05-06
Hi,

I have a Billion BiPAC 7402NX router ( http://www.billion.com/product/3g/bipac7402nx-wireless-11n-3G-ADSL2-vpn-firewall-router.html ) and a Linksys SPA2100 VOIP adapter with two phone lines.

One of the 4 ports on the router goes to an unmanaged switch to which several computers are connected. The second port on the router goes to the voip box.

We have a fast ADSL-2 connection and mostly everything works fine, however sometimes when there's network congestion or multiple downloads, the VOIP phone lines perform badly.

What can I do prioritise VOIP traffic. Specific instructions for my router will be much appreciated.

Thanks

0
Comment
Question by:anuragc
2 Comments
 
LVL 16

Expert Comment

by:memo_tnt
ID: 23667822
you can create limitation on your traffic
by rate limit ,, shaping
so, you can specify speed for VOIP traffic and other traffic to fit your needs ,
 
 
0
 
LVL 32

Accepted Solution

by:
Kamran Arshad earned 1500 total points
ID: 23668833
0

Featured Post

Get your Disaster Recovery as a Service basics

Disaster Recovery as a Service is one go-to solution that revolutionizes DR planning. Implementing DRaaS could be an efficient process, easily accessible to non-DR experts. Learn about monitoring, testing, executing failovers and failbacks to ensure a "healthy" DR environment.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I recently purchased a Bluetooth headset called the Music Jogger (model BSH10). The control buttons on it look like this: One of my goals is to use it as the microphone and speakers for Skype calls. In that respect, it works well. However, I …
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question