• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1032
  • Last Modified:

How to configure cisco ASA 5505 for Lan to Lan and port forwarding

Hi,

I want to configure a Cisco ASA5505 to do the following:
Lan to Lan.  ASA will listen on its inside interface for traffic on certain ports and forward them via its outside interface to servers on the other side of the tunnel. I hope I made it clear as to what I want.

How do I do that?
Thanks
0
Sean
Asked:
Sean
  • 2
2 Solutions
 
ionut_mirCommented:
You will have to make a nat statement: apply on the inside interface and only on the specific port(s) that you want.

example: source: 10.1.1.1 port 80 --> destination: 81.81.81.81 port 80; apply it on inside interface.
0
 
Kamran ArshadCommented:
0
 
SeanAuthor Commented:
Hello,
I neglected to mention that the ASA will be making the Lan to Lan connection with VPN  3000 concentrator, can I do what I need to do with these two devices?

Thanks
0
 
SeanAuthor Commented:
Thank you.
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now