Beeshoring
asked on
0x0000007b when loading BARTPE
Hi all
If I install XP (SP3) manually on my new Acer M1641 and specify the SATA Drivers as per the F6 option, the OS loads and all is ok. If I add the same Sata drivers into the path below and compile my BARTPE CD, the OS blue screens:
C:\pebuilder3110a\drivers\ SCSIAdapte r\M1641_SA TA
I've also tried setting the "ACPI Aware OS" option "on" and "off" in the BIOS, with no change.
Also there doesn't appear to be the "SATA/IDE to SATA/AHCI" in this BIOS either that some forums talk about.
Help much appreciated
Thanks in advance
Board: ACER MCP73VE NVIDIA MCP73
BIOS: American Megatrends Inc. R01-B3 07/18/2008
NVIDIA nForce RAID Controller
NVIDIA nForce Serial ATA Controller
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
If I install XP (SP3) manually on my new Acer M1641 and specify the SATA Drivers as per the F6 option, the OS loads and all is ok. If I add the same Sata drivers into the path below and compile my BARTPE CD, the OS blue screens:
C:\pebuilder3110a\drivers\
I've also tried setting the "ACPI Aware OS" option "on" and "off" in the BIOS, with no change.
Also there doesn't appear to be the "SATA/IDE to SATA/AHCI" in this BIOS either that some forums talk about.
Help much appreciated
Thanks in advance
Board: ACER MCP73VE NVIDIA MCP73
BIOS: American Megatrends Inc. R01-B3 07/18/2008
NVIDIA nForce RAID Controller
NVIDIA nForce Serial ATA Controller
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Your comments have led me into WAIK, deployment services and a whole new world.
i´ve created a new *.wim file with the every LAN driver under the sun, including the SATA driver.
I need to test it though, and will let you know.