?
Solved

cisco 2611 with wic1 and 1 fe, how do i bridge lans

Posted on 2009-02-22
7
Medium Priority
?
374 Views
Last Modified: 2012-08-13
Hi, i have a cisco 2611 with wic1 adsl, and 1 added fast ethernet.

 The 2 ethernet ports are assigned 192.168.1.xxx and 192.168.120.xxx
  the added fast ethernet is assigned 192.168.0.xxx

 My question is ... is it possible to bridge the 192.168.0.xxx with 192.168.1.xxx with this router.

 The o/s version is 12.4 (1a)

I would do it with an xp machine, but it has windows written all over it and it would probably fail anyway...
0
Comment
Question by:mr-gadget-tce
  • 4
  • 3
7 Comments
 
LVL 5

Expert Comment

by:ionut_mir
ID: 23705375
What do you mean by bridge? Do you mean to route between these to networks (one host in 192.168.0.x to reach another computer in 192.168.1.x network)? The answer is yes if you set the computers with the appropriate gateways.
0
 

Author Comment

by:mr-gadget-tce
ID: 23705405

 Great stuff i thought that was possible, but will it act as one network so to speak, any advice on how to configure it? any pitfalls etc.
0
 
LVL 5

Expert Comment

by:ionut_mir
ID: 23705434
Advice to configure what? the router or the computers?

If you need advice to configure router post the IP addresses that you want to assign to the interfaces.
0
Get free NFR key for Veeam Availability Suite 9.5

Veeam is happy to provide a free NFR license (1 year, 2 sockets) to all certified IT Pros. The license allows for the non-production use of Veeam Availability Suite v9.5 in your home lab, without any feature limitations. It works for both VMware and Hyper-V environments

 

Author Comment

by:mr-gadget-tce
ID: 23705506

  the 2 ip addresses i need to bridge are ...

 192.168.1.2 and 192.168.0.228
  the interfaces are eth0/2 and eth0/3 respectively..
0
 
LVL 5

Assisted Solution

by:ionut_mir
ionut_mir earned 750 total points
ID: 23705539
I am not sure that I understand what you want.
To configure the router with these two ip addresses:

Router(config)#interface e0/2  --> if the interface is fastethernet: int f0/2
Router(config-if)#ip add 192.168.1.2 255.255.255.0
Router(config-if)#int e0/3
Router(config-if)#ip add 192.168.0.228

On the computers you will have to set:

IP address: 192.168.0.x - whatever you want
Subnet mask: 255.255.255.0
GW: 192.168.0.228

And the othe one:

IP address: 192.168.1.x - whatever you want
Subnet mask: 255.255.255.0
GW: 192.168.1.2

If it isn't what you wanted please explain better what you need.

Good luck! :)
0
 
LVL 5

Accepted Solution

by:
ionut_mir earned 750 total points
ID: 23705541
I am not sure that I understand what you want.
To configure the router with these two ip addresses:

Router(config)#interface e0/2  --> if the interface is fastethernet: int f0/2
Router(config-if)#ip add 192.168.1.2 255.255.255.0
Router(config-if)#int e0/3
Router(config-if)#ip add 192.168.0.228

On the computers you will have to set:

IP address: 192.168.0.x - whatever you want
Subnet mask: 255.255.255.0
GW: 192.168.0.228

And the othe one:

IP address: 192.168.1.x - whatever you want
Subnet mask: 255.255.255.0
GW: 192.168.1.2

If it isn't what you wanted please explain better what you need.

Good luck! :)
0
 

Author Comment

by:mr-gadget-tce
ID: 23705572

 Ok thanks , i will give that a go, the pc's are easy to configure. its just the cisco stuff is quite interesting to configure.. i'll get back to you with the results as soon as i can.. many thanks for now...
0

Featured Post

Concerto's Cloud Advisory Services

Want to avoid the missteps to gaining all the benefits of the cloud? Learn more about the different assessment options from our Cloud Advisory team.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This program is used to assist in finding and resolving common problems with wireless connections.
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
There's a multitude of different network monitoring solutions out there, and you're probably wondering what makes NetCrunch so special. It's completely agentless, but does let you create an agent, if you desire. It offers powerful scalability …

579 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question