Link to home
Start Free TrialLog in
Avatar of pradeepkaravadi
pradeepkaravadi

asked on

Checkpoint VPN-1 UTM implementation on HP DL 360 connections and through put handling capacity.

Hi,

I am a Security Consultant working with HP. I am planning to implement Checkpoint VPN-1 Power/UTM on HP DL 360 boxes. I would like to know some technical details:

1.      The Customer requires the firewalls to send an SNMP Trap to a management console
2.      The Customer requires support for at a minimum 32000+ concurrent connections
3.      The Bank requires the firewalls should support 900,000 connections per second or above and a throughput of 1500 Mbps
4.      The Customer requires support for Port Address Translation (PAT) capability
5.      The Customer requires support for 1500 simultaneous VPN tunnels
6.      The Customer requires the firewall should support packet-forwarding rates in excess of 200000 64-byte packets per second
7.      The Customer requires network management services should be provided using standards based protocols like SNMP & SNMP V2. The following MIBs should be supported :SNMP get, SNMP trap, MIB II, Firewall MIB, Syslog MIB
8.      The Customer requires support for a minimum of 10 VLANs (IEEE 802.1 Q)
9.      The Customer requires support for Automatic log file compression Log file wrapping

Can you provide me the above details, so that I can clarify with my customer.
ASKER CERTIFIED SOLUTION
Avatar of deimark
deimark
Flag of United Kingdom of Great Britain and Northern Ireland image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial