<div>
<div class="content wysiwyg-content">
HI experts,<br />
<br />
A few questions on the pIx 501<br />
<br />
1) what do you use in place of the usual CNTRL+C to back out of something so I don't have to hit the space bar all the way down.<br />
<br />
2) If there is an ACL already in place, how do I add another line to it? Example:<br />
<br />
ACL:<br />
access-list NONAT permit ip host 192.168.20.126 172.2.0.0 255.255.0.0<br />
<br />
What is the syntax I use to add another host to this ACL? I don't want to mistakenly wipe out the full ACL.<br />
&nbsp;
</div>
</div>


HI experts,

A few questions on the pIx 501

1) what do you use in place of the usual CNTRL+C to back out of something so I don't have to hit the space bar all the way down.

2) If there is an ACL already in place, how do I add another line to it? Example:

ACL:
access-list NONAT permit ip host 192.168.20.126 172.2.0.0 255.255.0.0

What is the syntax I use to add another host to this ACL? I don't want to mistakenly wipe out the full ACL.
 

Commands on PIX501

Hardware-based firewalls provide more sophisticated protection for inbound and outbound traffic than the simple Windows software firewall or the basic NAT firewalls found in routers. These devices implement techniques such as stateful packet inspection, deep packet inspection, and content filtering; and may include built-in antivirus and anti-malware protection.