Solved

Cisco AnyConnect SSL VPN Connect Failure on Dell E6500 Computers

Posted on 2009-03-29
1
1,164 Views
Last Modified: 2012-05-06
Each time we try to establish an SSL VPN connection between one of our new Dell E6500 notebooks and our Cisco ASA 5510, we get an error:

The VPN client was unable to successfully verify the IP forwarding table modifications. A VPN connection will not be established.

This computer does NOT have iTunes or Apple Bonjour installed (and never has -- it has been out of the box less than a week).

I've also checked the registry for mdnsresponder.exe. It is nowhere to be found.

This system is running 32-bit Vista as installed by Dell.

We've removed the Dell Control Point software.

The version of AnyConnect is 2.3.0185.

Any help fixing this will be appreciated.
0
Comment
Question by:jhutchinst2systems
1 Comment
 

Accepted Solution

by:
jhutchinst2systems earned 0 total points
ID: 24014611
Solved. Upgraded to Cisco AnyConnect VPN Client Version 2.3.0254.
0

Featured Post

How to improve team productivity

Quip adds documents, spreadsheets, and tasklists to your Slack experience
- Elevate ideas to Quip docs
- Share Quip docs in Slack
- Get notified of changes to your docs
- Available on iOS/Android/Desktop/Web
- Online/Offline

Join & Write a Comment

When you connect to your workplace's VPN, you may not notice that you are using your workplace's servers to serve up webpages.  This might be undesirable since the workplace can log all the places you've been.  It also might be very slow to load pag…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now