Solved

wireless brige connectivity is disconnecting

Posted on 2009-03-29
1
292 Views
Last Modified: 2013-11-12
Dear Sir ,
               i have Linksys wireless-G Ethernet Bridge model number WET54G , i have created bridge connection between these two devices across the road around 200 meters , which always keep on disconectcing after a week period then i have to restart both devices to esteblish a connection .

1) time to time my connection between these two wireless bridges keep on disconnecting then i have to restart ( power switch on and off) then they work fine , how should i avoid it ?
                    i herd that point to point connection between two links with dish is a permanent solution , kindly i am looking for a permanent solution .please suggest me one .
regards
0
Comment
Question by:sanjeevkmrs
1 Comment
 
LVL 5

Accepted Solution

by:
ssmith764 earned 500 total points
ID: 24014218
A firmware upgrade may help with the problem you have. have you checked with Linksys to see if this is a known issue?
200 meters is pretty far especially for 802.11g. You may find that changing the antennas to directional ones may help or a better way would be to change the bridge to use 802.11n which has a much further range. You should be able to get 100mbps over the 200 meters using 802.11n and this will be more reliable if you use directional antennas as well. I would recommend the BelAir 20  from Belair networks - http://www.belairnetworks.com/products/index.cfm/intProductID/2
Alternatively if you have a clear line of sight between the two buildings you could use a laser link. An entry level laser link would cost in the region of £1500 GBP but these are suseptable to weather conditions (e.g. fog)
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

In this article I will describe how to setup a Cisco WLC 5508 to work with Apple's Bonjour protocol across VLANs.  I will also discuss using screen mirroring and Airplay on an AppleTV v3.  This article covers the wireless network only and requires m…
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

759 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now