?
Solved

zone manager

Posted on 2009-03-29
9
Medium Priority
?
654 Views
Last Modified: 2012-05-06
Hi I am using zone manager from netregistry and its not working for some reason
i set up
perfectsolution.com.au        3600        IN        A        60.242.178.134
perfectsolution.com.au        3600        IN        MX        20        mx.perfectsolution.com.au.
perfectsolution.com.au        3600        IN        MX        10        mx2.perfectsolution.com.au.
perfectsolution.com.au        3600        IN        NS        ns.perfectsolution.com.au.
perfectsolution.com.au        3600        IN        NS        ns2.perfectsolution.com.au.
and i also set up name server
ns.perfectsolution.com.au ns2.perfectsolution.com.au pointed back to 60.242.178.134

can anyone help me on this thanks
0
Comment
Question by:emeraldpiggy
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 5
  • 4
9 Comments
 
LVL 3

Expert Comment

by:SonnyHood
ID: 24015995
reset it back to defaults
Your name server should be ns1.netregistry.com or whatever the correct one is.
And then you edit the zone from within netregistrys zone manager.

Then once the zone is with netregistry you can edit MX records, A/C records etc.
0
 

Author Comment

by:emeraldpiggy
ID: 24016018
hi sonnyhood
can u be more specific?
0
 
LVL 3

Expert Comment

by:SonnyHood
ID: 24016092
Login to netregistry console
choose your domain, press administer
click on the domain name option
under name servers delete whatever you have there and add the following
ns1.netregistry.net
ns2.netregistry.net
ns3.netregistry.net

Then netregistry will be managing your zone file, then you can go to zone manager and make changes
perfectsolution.com.au        3600        IN        NS        ns.perfectsolution.com.au.
perfectsolution.com.au        3600        IN        NS        ns2.perfectsolution.com.au.
This is not required by you unless you are going to be creating a nameserver for other domains, which i assume you are trying to get your website and email to work for perfectsolution.com.au

If you are going to host your own mail MX server, then you need the zone manager, otherwise if you are going to use a third party hosting provider you only need to add the hosting nameservers and everything will work on your hosting provider's control panel.

You will need to be a bit more specific on what you want to achieve by all this.
0
Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

 
LVL 3

Expert Comment

by:SonnyHood
ID: 24016107
zonemanager is not required by all circumstances
Only required for lets say advanced requirements.

For general hosting setup just add your nameserver information under the domain name menu i mentioned.
0
 

Author Comment

by:emeraldpiggy
ID: 24016184
thanks sonnyhood
i changed back to default according to your 2nd answer but it gives me the netregistry ip address which is
208.67.216.132 not mine 60.242.178.134
btw yeah i wanna set up mx for my zimbra server which hosted on the same ip address

thanks again for your help
0
 
LVL 3

Accepted Solution

by:
SonnyHood earned 500 total points
ID: 24016225
Good i can see you have updated your ns server records correctly.
but you have two mx records for netregistry and 2 for mx.perfectsolutions.

Ok for MX, then goto zone manager
remove all netregistry MX records, and the mx1/2 you created earlier.
perfectsolution.com.au        3600        IN        MX        20        mx.perfectsolution.com.au.
perfectsolution.com.au        3600        IN        MX        10        mx2.perfectsolution.com.au.
^ remove these.
ANd make MX 10 = 60-242-178-134.static.tpgi.com.au
this is the reverse DNS of your IP 60.242.178.134. MX records must be names not IP's.

Then its done, since you have updated nameservers it takes upto 24 hours to update global DNS records.
MX, a and c records can be mixed and change limited only by the TTL which is 3600 secs normally.


0
 
LVL 3

Expert Comment

by:SonnyHood
ID: 24016236
C:\Users\sonny>ping -a 208.67.216.132

Pinging hit-nxdomain.opendns.com [208.67.216.132] with 32 bytes of data:
Request timed out.

You must be using opendns for name resolution ratehr than your ISP provided DNS.
They will try and give you the best match, mine just says cannot resolve right now.

Once global dns is updated it should take you to the netregistry default home page saying website under constructions or whatever it is.
0
 

Author Comment

by:emeraldpiggy
ID: 24024379
hi SonnyHood
thanks for the reply
I cant remove mx records for netregsitry. there isnt an option for this
perfectsolution.com.au.        3600        IN        MX        20        mx2.netregistry.net.
perfectsolution.com.au.        3600        IN        MX        10        mx3.netregistry.net.

and regarding the ip address for perfectsolution. i would like it to redirect to 60.242.178.134, not 208.67.216.132 and i cant make it happen
again i really appreciate it that if u can enlighten me on this
0
 

Author Closing Comment

by:emeraldpiggy
ID: 31564186
thanks. thats very kind of you to help me.
i ve got it all working
0

Featured Post

Prepare for your VMware VCP6-DCV exam.

Josh Coen and Jason Langer have prepared the latest edition of VCP study guide. Both authors have been working in the IT field for more than a decade, and both hold VMware certifications. This 163-page guide covers all 10 of the exam blueprint sections.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There have been a lot of times when we have seen the need to enter a large number of DNS entries in a forward lookup zone. The standard procedure would be to launch the DNS Manager console, create the Zone and start adding new hosts using the New…
I've written instructions for one router type, but this principle may be useful for others of the same brand and even other brands of router. Problem: I had an issue especially with mobile devices that refused to use DNS information supplied via…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
In this video, Percona Solution Engineer Dimitri Vanoverbeke discusses why you want to use at least three nodes in a database cluster. To discuss how Percona Consulting can help with your design and architecture needs for your database and infras…
Suggested Courses

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question