Solved

Hyper-V

Posted on 2009-03-30
1
575 Views
Last Modified: 2013-11-11
Is it possible to build a 64-bit 2008 server and user hyper-v to install 32-bit 2003 servers on the same box?

Thanks.
0
Comment
Question by:LCNW
1 Comment
 
LVL 38

Accepted Solution

by:
Philip Elder earned 500 total points
ID: 24023408
Yes.
Host/Parent = Windows Server 2008 x64 Standard/Enterprise/DC

Guest/Child = Windows Server 2000/2003/2008 x86/x64 in their various incarnations.

Number of VMs is limited by your hardware and licensing.

Philip
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question