Solved

Hpyer-V and a Windows XP Virt. Machine

Posted on 2009-03-30
2
200 Views
Last Modified: 2012-05-06
Hi Everyone:

Scratching my head on this one.    I have a XP Hpper-V machine that I created .  I installed the legacy network adapter so the OS has a NIC driver and loads up just fine.  Although, I can't seem to pass traffic via the VM machine or hit any of IP's within my network?   Any suggestions?  Basically, I want my users to get to that XP Hyper-V via RDP and run a few applications.

Thanks in advance,

Sam
0
Comment
Question by:sbarhoumeh
2 Comments
 
LVL 10

Accepted Solution

by:
ashwin_kumar525 earned 250 total points
ID: 24024580
Did you configure the VMs NIC to connect to a Virtual Network (Virtual Switch) which is connected to the Physical NIC? Make sure that the Virtual Network is set as 'External network' but not 'Internal only'

Obviously, if there is no routing process, the VM must be in the same subnet as your User's VMs.

Let me know how it goes.
0
 

Author Closing Comment

by:sbarhoumeh
ID: 31564596
It looks like I had created one to many external NIC..  I removed all of them and basically created one external NIC and matched it up with the VM machine.  That did the trick.  Thanks for pointing me in the right direction!!!!  
0

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Introduction Windows 2012 is here - it is upon us, and I hope that like me, you will upgrade your Hyper-V to the new version which has been promised to be a lot more stable, flexible and powerful than its predecessor in Windows 2008 R2.  Setting up…
When you upgrade from Windows 8 to 8.1 or to Windows 10 or if you are like me you are on the Insider Program you may find yourself with many 450MB recovery partitions.  With a traditional disk that may not be a problem but with relatively smaller SS…
This video Micro Tutorial explains how to clone a hard drive using a commercial software product for Windows systems called Casper from Future Systems Solutions (FSS). Cloning makes an exact, complete copy of one hard disk drive (HDD) onto another d…
With the advent of Windows 10, Microsoft is pushing a Get Windows 10 icon into the notification area (system tray) of qualifying computers. There are many reasons for wanting to remove this icon. This two-part Experts Exchange video Micro Tutorial s…

829 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question