Solved

Windows 2008 RRAS on server with multiple IPs on single interface

Posted on 2009-03-31
1
555 Views
Last Modified: 2012-05-06
I have a Windows 2008 server configured with multiple public IP addresses.  Clients connect to the server using the .6 address but their outbound sessions from the server appear to be coming from the .2 address, which is the primary IP on the server.  I understand this is normal behaviour but is there a way to force the server to use the .9 address for only VPN traffic without changing the primary IP assigned to the adapter?
0
Comment
Question by:FNT
1 Comment
 
LVL 59

Accepted Solution

by:
Darius Ghassem earned 500 total points
ID: 24028248
No, there isn't a way to change this. If you had two NICs you could most likely get it done but with one nic there isn't a way.
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Need In an Active Directory enviroment, the PDC emulator provide time synchronization for the domain. This is important since Active Directory uses Kerberos for authentication.  By default, if the time difference between systems is off by more …
You might have come across a situation when you have Exchange 2013 server in two different sites (Production and DR). After adding the Database copy in ECP console it displays Database copy status unknown for the DR exchange server. Issue is strange…
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question