Solved

What does this log mean?

Posted on 2009-03-31
4
382 Views
Last Modified: 2012-05-06
3/31/2009 5:55:07 AM c4507r_core Warning 318: 000702: Host 00:50:56:84:15:3F in vlan 1 is flapping between port Gi4/4 and port Gi3/11

3/31/2009 12:05:48 AM c4507r_core Warning 266: 000650: Host 00:50:56:84:15:3F in vlan 1 is flapping between port Gi3/11 and port Gi3/7

I know what flapping is, but why would it be reported like it is above (i.e.: Flapping between port x and port y).  We have servers plugged into these ports
0
Comment
Question by:dissolved
  • 2
  • 2
4 Comments
 
LVL 43

Accepted Solution

by:
JFrederick29 earned 500 total points
ID: 24028017
Do you have NIC teaming setup on the servers?  If so, you can see this if the NIC is doing load balancing instead of "fail on fault".  Verify the NIC teaming configuration is set to "fail on fault".
0
 

Author Comment

by:dissolved
ID: 24028091
yea the nics are set to team.  So I want it to fail on fault correct? Not load balance?
0
 
LVL 43

Expert Comment

by:JFrederick29
ID: 24028136
Yes, correct, fail on fault.  Only use load balance when you have an etherchannel connection with the switch.
0
 

Author Closing Comment

by:dissolved
ID: 31564778
thanks
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This tutorial will go through the steps required to write a script that will back up the configuration settings of a HP-ProCurve switch. You will need to get the following things to follow this tutorial: Telnet Scripting Tool e.g. TST10.exe …
I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
A short tutorial showing how to set up an email signature in Outlook on the Web (previously known as OWA). For free email signatures designs, visit https://www.mail-signatures.com/articles/signature-templates/?sts=6651 If you want to manage em…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question