Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

How to Configure Vlan based Qos in cisco 4506 IOS switch

Posted on 2009-03-31
1
Medium Priority
?
1,636 Views
Last Modified: 2012-05-06
Hi ,

Need help in configuring Vlan based QOS. Let me explain the scenario.

Location A is connected to Location B through Ethernet Over SDH link (10Mbps). This are connected to 4506 switch in each Location.

Have configured this to be trunk and have spanned some data vlans 10, 20, 30 and some voice vlans 101,102 and 103 through it.


I need to configure QOS to prioritize and reserve bandwidth for these voice vlans. This QOS config needs to be applied to the trunk interface connecting these locations.

Please suggest a suitable method for the same.
0
Comment
Question by:ganmax
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 5

Accepted Solution

by:
Melaleuca earned 750 total points
ID: 24035418
There are a couple ways to do this. What type of VoIP phones are you using? my recommendation would be to use AutoQOS. if not i have attached a good QOS template for all types of qos.
qos-template.txt
0

Featured Post

Survive A High-Traffic Event with Percona

Your application or website rely on your database to deliver information about products and services to your customers. You can’t afford to have your database lose performance, lose availability or become unresponsive – even for just a few minutes.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question