<div>
So, you had to activate the DNS service?
</div>


<div>
<div class="content wysiwyg-content">
So, we were previously running our website off of a 10 year old computer running NT4 (and not very well) we've recently moved the website to a Poweredge 1950 in preparation for expanding our websites capabilities. &nbsp;Our previous web server sat in the DMZ on our firewall (172.16.50.3) The new web server has been assigned to (172.16.50.4) And given all the same other network configuration, (default gateway, DNS, etc..) <br />
<br />
The Firewall (asa 5510) has been configured with the same exceptions and rules for this new server.<br />
<br />
If I open up a browser and put in the IP of a known website (google) it goes directly to the page, yet it cannot resolve names (DNS issue)<br />
<br />
The old web server had no problems with this, the new server is using the same DNS addresses, (Qwest Public DNS) and has the problem.<br />
<br />
Any Ideas?
</div>
</div>


So, we were previously running our website off of a 10 year old computer running NT4 (and not very well) we've recently moved the website to a Poweredge 1950 in preparation for expanding our websites capabilities.  Our previous web server sat in the DMZ on our firewall (172.16.50.3) The new web server has been assigned to (172.16.50.4) And given all the same other network configuration, (default gateway, DNS, etc..) 

The Firewall (asa 5510) has been configured with the same exceptions and rules for this new server.

If I open up a browser and put in the IP of a known website (google) it goes directly to the page, yet it cannot resolve names (DNS issue)

The old web server had no problems with this, the new server is using the same DNS addresses, (Qwest Public DNS) and has the problem.

Any Ideas?

New Web Server Has no Internet.

Servers are computing devices that are similar to desktop computers in that they have the same basic components, but are significantly different in size, configuration and purpose. Servers are usually accessed over a network, and many run unattended, without a computer monitor, input device, audio hardware or USB interfaces. Many servers do not have a graphical user interface (GUI), and are configured and managed remotely. Servers typically include hardware redundancy such as dual power supplies, RAID disk systems, and ECC memory, along with extensive pre-boot memory testing and verification. Critical components might be hot swappable, and to guard against overheating, servers might have more powerful fans or use water cooling.