Solved

Can I plug a T1 into a Juniper SSG5?

Posted on 2009-03-31
4
594 Views
Last Modified: 2012-08-13
Can I plug a T1 (from the demarc "smartbox", currently using rj45 cable) into an SSG5?  Or do I need to use the SSG20 with the CSU/DSU card....or a similar router with a CSU/DSU?

Thanks in advance.
0
Comment
Question by:Zsaltzman
  • 3
4 Comments
 
LVL 11

Accepted Solution

by:
grsteed earned 500 total points
ID: 24034684
You need the SSG20 with the T1 interface card. The SSG5 can only handle ad dial-up connection either BRI ISDN or V92. Here's the data sheet;

http://www.juniper.net/us/en/local/pdf/datasheets/1000176-en.pdf

Cheers,
Gary
0
 
LVL 11

Assisted Solution

by:grsteed
grsteed earned 500 total points
ID: 24034702
And yes, you could use an external router as a gateway to get from T1 to Ethernet.

Gary
0
 

Author Comment

by:Zsaltzman
ID: 24039939
OK, right now it's T1 demarc - RJ45 - EdgeMarc 4500.  So this means that the EdgeMarc has a CSU/DSU built in?
0
 
LVL 11

Expert Comment

by:grsteed
ID: 24040756
Yes,  from the picture on this page it can do everything.  

http://www.edgewaternetworks.com/edgemarc_overview_page.htm

Cheers,
Gary
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Expanding Subnet Mask 20 110
What determines if a route map takes precedence over a static route? Cisco 2 33
2 routers and 1 public IP Address. 10 41
Cisco 3650 switch 7 35
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question