Solved

Wl Commands on a Linksys WRT54GL running DD_WRT.

Posted on 2009-04-01
4
491 Views
Last Modified: 2013-11-12
Hi

My situation is that I have over 100 wireless routers in different locations with the frameburst option enabled. This is causing probelms with user when they use a VPN or Skype.

I can access the command line throught  online management page so can easily use WL commands to change the routers settings.

my problem is that I can't find the right command  to turn off framburst permantly.

Thanks in advance

Greg
0
Comment
Question by:GregVenning
  • 2
  • 2
4 Comments
 
LVL 8

Expert Comment

by:engeltje
ID: 24047412
The command should be just frameburst
It switches the frameburst between enabled and disabled.

You can check the DD WRT wiki for a complete command set.
http://www.dd-wrt.com/wiki/index.php/Main_Page

Using DD-WRT I would warn you for this: There is a new malware around attacking routers. DD-WRT routers are vurnable for this.
Check this: http://it.slashdot.org/article.pl?sid=09/03/23/2257252&from=rss

0
 

Author Comment

by:GregVenning
ID: 24047539
Thankyou, that is very helpful. The next step is to put this into the start up so as the router reboots daily, I want the feature to be frameburst permantly disabled.

Also thankyou for the warning, I will investigate it further.

Regards

Greg
0
 
LVL 8

Accepted Solution

by:
engeltje earned 500 total points
ID: 24047816
If I recall this right: the command nvram commit should save the changes.

0
 

Author Closing Comment

by:GregVenning
ID: 31565202
Thanks

I shall give it a try.

Regards

Greg
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Multi-source agreements are important because they set standards that all manufacturers should follow to ensure that devices are compatible with multiple vendors. The multi-source agreement (MSA) is an agreement that establishes how multiple vendors…
In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question