Solved

I install HYPER-V to my Windows 2008 and i installed XP SP3, the network adapter and video controller cannot be recognized...I couldn't find the menu item in Hyper-V for those...Where?

Posted on 2009-04-03
5
585 Views
Last Modified: 2013-11-11
I install HYPER-V to my Windows 2008 and i installed XP SP3 as guest OS, the network adapter and video controller cannot be recognized in my XP in device manager...I couldn't find the menu item in Hyper-V for those...Where are they?

Best regards...
0
Comment
Question by:jazzIIIlove
  • 3
  • 2
5 Comments
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 24060103
You need to install the integration components. Stop your Hyper-V VM then right-clickt it go to settings this where you see your hardware components. Click on network adapter and add a legacy adapter.
0
 
LVL 12

Author Comment

by:jazzIIIlove
ID: 24072091
Thanks for your response dariusg...

I added the legacy adapter and my network problem in virtual machines have gone...But I cannot have a full screen in my XP SP3 (my guest OS) and i think the problem is still related with my VGA adapter in my guest OS...

Please examine my screenshots...

Best regards...
GuestXP-DeviceManager.jpg
Hyper-V-Settings-Where-is-VGA-Se.jpg
0
 
LVL 59

Accepted Solution

by:
Darius Ghassem earned 500 total points
ID: 24072157
0
 
LVL 12

Author Comment

by:jazzIIIlove
ID: 24072461
you are right again dariusg...:)
0
 
LVL 12

Author Closing Comment

by:jazzIIIlove
ID: 31566244
dariusg is swift indeed...
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

It Is not possible to enable LLDP in vSwitch(at least is not supported by VMware), so in this article we will enable this, and also go trough how to enabled CDP and how to get this information in vSwitches and also in vDS.
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question