• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 297
  • Last Modified:

VPNs won't come up on restored PIX

I've been wrestling with adding another IPSEC VPN on a PIX 506E with V6.3(5).  In the course of my struggles, I've somehow broken the existing IPSEC VPNs that were configured on this box.

I had enough sense to save the original configuration.  Today I erased the messed up configuration with a write erase command, manually configured the inside interface and reloaded that original configuration.  Everything works great expcept the original tunnels still won't come up.

Is there another step I need to do?

Thanks

Bill
0
labdunn
Asked:
labdunn
1 Solution
 
asavenerCommented:
The saved configuration probably had just an asterisk for the shared key.  You'll need to enter the proper shared key before the VPN will work.
0
 
labdunnAuthor Commented:
Boom.  That was it.  Thanks - Bill
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now